WHAT THE HECK IS A LENS ERROR all i know is that i tun it on and it is ok but nothing shows up except words that say "Len's error, reset camera" how do i reset it...do i turn it off? i need desperate answers
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hello Branden, The problem is in the drive assembly. The drive gears strip and the pieces of plastic jam the motor causing the error codes. The camera is toast, Repair will be costly. Best Regards, Russell
try to remove the ring over the lens- this is just alluminium ring. I had same problem when my camera felt on floor... i thought its wrecked ... but it was 4 months ago and since that i made thousands of photos and its working fine. Remove the ring, i did it by forcing it, twisting and when removed - lens error was not appearing. I fixed that ring and placed back with a little super glue. Everything is ok.
I followed the advice of the other posts, about the lens just being stuck. I tried the tweeze and blow, and the gentle turning methods. Neither did the trick. I went to the "pull the thing out, if it breaks, well it wasn't working anyway" method, and voila! Okay, so I broke a little piece of the lens sliding lens cover...but at least I got to take the pictures of my daughter and Cupcake the Teddybear for her school project. Thanks everybody for the help.
Dont know if this will help anyone. I had a lens error for ages. In my long lasting devotion to google serk I found that many equall contenders found that a strike with a soft book in different directiions solved the problem. I ended up beating the camera from all angles with the palm of my hand. But hey! it worked. 4 months later im looking for the cure to system error 2. If you can help wi that one.
You could try the Casio Tech Support team,
but if as you suspet it is a matter of dirt- there is nothing to be done except replace the camera- the cost os shippin and examining the camera etc. will come close to its replacement.