Question about Rowenta Irons
On June 13, 2008, I sent my Rowenta Iron to California Electric in Concord, Ca. for repair. I have not heard from them and don't know if they received my iron, if it can be fixed or is in the process. Could you check on this for me as I don't have a phone number to contact them. I included my phone number in my letter to them, but have received no response.
The address I sent it to, which was included with my iron when I purchased it, is California Electric, 1170 G Burnett Avenue, Concord, Ca. 94520
Thank you for your help.
My e-mail address is firstname.lastname@example.org
you can mix 50% water with 50% vinager let it set in the iron overnight then turn it on and let the steam run out.What happens is the inside of the iron where the water is had corroded or rusted or has lime deposits.the vinager will break this loose overnight.also after you let the iron steam out all the mixture,flush the iron 4 to 5 times and start using fresh water from a store bought gallon.your tap water is probably full of iron.
Posted on Nov 15, 2007
SOURCE: Rowenta Steam Iron Leak
Yes, my rowenta model DX6700 is also leaking from the heal. I bought this iron after having a GE for ten years because I thought it would iron my clothes better. I've had it less than two years. How frustrating!!!!!!
Posted on Aug 01, 2008
Inside the iron is a piece of thermal metal the is supposed to make contact with a small ceramic pin with a metal cap on it. I think this was intended to be a safety device but they fail and the iron will not heat up. The part does not seem to be available so easiest way to fix is to put a small bead of glue on the housing that forces this to make contact.
Posted on Mar 06, 2009
Tips for a great answer:
Aug 29, 2011 | Rowenta DG-980 Iron
Aug 27, 2011 | Rowenta DG-980 Iron
Aug 22, 2011 | Rowenta DG-980 Iron
Aug 17, 2011 | Rowenta DG-980 Iron
Aug 16, 2011 | Rowenta DG-980 Iron
May 25, 2010 | Rowenta DG-980 Iron
Apr 01, 2010 | Rowenta DG-980 Iron
Jul 30, 2008 | Rowenta DG-980 Iron
Jun 16, 2017 | Rowenta Irons
302 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: