Question about JVC HD-52G886 52" Rear Projection HDTV

2 Answers

No sound on my 52in jvc tv

I went to change the bulb in my tv after i was done i turned it on i had picture and sound turn it off for like 1 hour turn it on had picture but no sound please help me with this problem

Posted by on

  • 1 more comment 
  • Anonymous Sep 01, 2008

    i was playing wii and the tv went to lines so i turned it off now when you go into the ausio menu and try to turn the sound on it wont come on even if you use the remote and we just got the tv. help!!

  • hoggard1 Oct 14, 2008

    same problem. JVC 27" bought from a friend. Had sound at their house. no sound at my house. Picture ok. Anybody know how to get the sound back?

  • nsgirouard Dec 16, 2008

    I have no sound on my 52 inch JVC TV, I have a picture but no sound

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I unplugged my tv and when i turned it back on had picture but no sound and all cards are still in tack.

Posted on Sep 04, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

What was the solution

Posted on Dec 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

LG LED TV has sound but no picture. Went out all of a sudden. Image shows with flashlight. Flashes for split second on power up and power down.


Your screens back light has most likely failed and or the voltage controller for the back light, both should be replaced.

Jan 08, 2017 | LG Televison & Video

1 Answer

I have pioneer plasma tv about 6 years old. I turned the power on, sound but no picture. Do you think it is worth fixing?


no
plasma tv units consume considerable power and the latest led units don't so for the extra cost of a new unit , there will be a power saving over the years

Jan 08, 2017 | Pioneer Televison & Video

1 Answer

To begin with I have Dish network my TV went off and since then in order to have picture and sound i have hookup HDMI cable and also video cable to have picture and sound


You need to set up the dish box for the correct resolution ie 720/1080 etc.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Jan 05, 2017 | DISH Network Televison & Video

3 Answers

LG 26LH2000 television. Last 2 days when I turned my TV on there was only sound, and black screen.


back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board.
26359174-wxmxxsggneevie4j1gyznoid-1-0.jpg

Nov 16, 2016 | LG 26LH2000 26 in. HDTV LED TV

2 Answers

I have sound but no picture on my tv


This is a popular question. Most of the time you either need to make sure all connections are not loose or just need to turn off your tv and receiver and unplug. Wait for 1 minute then reboot.
I recommend this short video as it walks you through some diagnostics for other possible problems.
Repair TV With Sound But No Picture

Nov 24, 2015 | Luxor Televison & Video

1 Answer

When CRT JVC TV is first turned on, the image looks shrunken and warped, eventually, the image looks fine. What to fix?


SMPS fault. Check and replace damaged component/s at it main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Surf the site with patience. Pull up older posts. Do a search by type in the brand name of your device at its search box.
http://electronicshelponline.blogspot.com/
Check all the electrolytic capacitors.

May 26, 2014 | Televison & Video

1 Answer

Would like to know the codes for a LG tv, Sony tv, and a TOSHIBA DVD ?


How to Program


Remotes With SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press "SET" Hold until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


Remotes Without SET Button
1. Choose and press a device key i.e TV. LED will flash once.
2. Press and hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
3. Enter the 4-digit Device code (refer code list).
4. The LED will flash once as each number is programmed, at the end of the 4th digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process. If the first code does not work then repeat the process with the next.
5. Important - Some brands use other manufacturers to make their devices if the codes available do not work the try the MAGIC search function.


MAGIC SEARCH FUNCTION
1. The magic search function enables you to scroll through the entire code list one by one by pushing the on/off button. Each time you push the on/off button the remote automatically switches to the next code in the list and sends a signal to the device you have chosen.
2. Choose and press a device key i.e TV. LED will flash once.
3. Press and hold the SET button or if no SET button then hold BOTH the CHANNEL UP AND VOLUME DOWN button until the LED Lights up.
4. Enter the 4-digit Device code (refer MAGIC list) i.e TV is 0001.
5. The LED will flash once as each number is programmed at the end of the 4 digit the LED will turn off immediately if correct. If the LED flashes then something went wrong in the process.
6. Start scrolling by pushing the ON/OFF button as soon as your TV or Chosen device turns OFF lock the code in by pushing the DEVICE key again.

Mar 27, 2013 | Televison & Video

Not finding what you are looking for?
JVC HD-52G886 52" Rear Projection HDTV Logo

Related Topics:

1,343 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69795 Answers

easy alberta
easy alberta

Level 2 Expert

132 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a JVC Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...