Question about Brother ML-100 Typewriter
The letters that are typed are not the letters that are produced.
I've tried turning it off and unplugging it, but it's no use.
If the characters are showing up different than the ones you pushed then your wheel is probably bent. First, open the clear cover on your ml100. Second there is a black lever that you pull towards you. Next, you pull the wheel out and if any of the arms on it are bent than straighten them out, and make sure none of the arms are over lapping. Next, return the wheel, push the black lever back into place, close the clear cover and then hold down the code button and press the reset key (the "q" key). If that does not work then you need a new wheel. This is what just worked for me, I hope it helps.
Posted on Dec 11, 2008
Try new wheel....For starters
Posted on Aug 01, 2008
Characters typed do not show on paper. the wheel is fine.
Posted on Jan 07, 2009
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
May 13, 2011 | Brother ML-100 Typewriter
Feb 14, 2011 | Brother ML-100 Typewriter
Jan 24, 2011 | Brother ML-100 Typewriter
Jan 25, 2010 | Brother ML-100 Typewriter
Oct 21, 2009 | Brother ML-100 Typewriter
Aug 22, 2009 | Brother ML-100 Typewriter
Jun 11, 2009 | Brother ML-100 Typewriter
277 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: