Question about Computers & Internet

Open Question

Monitor Drivers For My Proline Crystalview 17 Monitor

I am failing to find the drivers for my Proline Crystalview 17 Monitor. I am running windows xp.

Please assist.

Posted by on

3 Suggested Answers

rey jr
  • 149 Answers

SOURCE: Generic PnP Monitor to LCD Monitor LG L1719S

hi there, just download the driver software. ty

Posted on Jan 01, 2008

  • 99 Answers

SOURCE: Drivers for the Acer LCD monitor X193W under Windows XP Pro.


Posted on Nov 09, 2008

  • 1 Answer

SOURCE: Cannot Find Drivers for Asus VW193T 19" LCD Monitor

there are no drivers for this monitor. you need to update or upgrade your video card.

Posted on Nov 21, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Norcent Technologies LM173SB 17 in. Flat Panel LCD Monitor Won't work with Windows 7

I ran into this very problem myself, the issue is that the monitor only supports 1280x1024 resolution MAX. Windows 7 cannot detect this monitor and so it does not know it is limited to this resolution, so Windows 7 is putting out a higher resolution at startup, thus the monitor tries to autodect for a second but then just goes blank because it doesn't understand (and can't display) the signal. The only solution is to use another monitor and adjust the resolution to 1280x1024 or lower, but I run into a problem where as soon as you remove the other monitor and restart, WIndows tries to "plug & play" the monitor all over again at startup. So you're best bet really is a newer monitor unfortunately, I only use my old Norcent monitor with my XP computer.

Aug 29, 2012 | Norcent Technologies LM173SB 17 in. Flat...

1 Answer

Require driver for windows 7 64bit please

I have run into this issue a couple times recently with this exact model & a handfull of other various Monitor's , , here is a link to the drivers I used on Windows 7 64 bit Home Premium , I installed using compatibility mode ( right click the .exe , select properties from the drop down menu , select the compatibility tab , select run in " windows xp sp2 " mode & check the box at the bottom " run as administrator " . Also you might want to disable " UAC " ( open the control panel , select users , select change UAC settings , drag the slider all the way down to disable , then click apply & reboot your pc for it to take effect .

Apr 17, 2011 | ADI Corporation ProVista M700 (White) 17"...

1 Answer

My PC runs on an XP Pro x64 system and has installed Plug & Play Monitor instead of my Acer X193W ....!! How can i install my Monitor properly on XP x64.... Thank you...

Unfortunately Acer has chosen to not support Windows XP any longer. If you go to the Acer website as follows:

Then look for the driver for your monitor. You will see that the driver only lists versions of the Vista O/S as those that will work with the driver. When XP is not able to load the correct driver the system will identify and load the driver as a Plug & Play Monitor. This means that you will be able to get some functionality out of your monitor. but you will not be able to get all of the resolutions that the monitor is capable of running. If you just purchased the monitor and were told that it will work correctly with XP, you may want to take it back to the dealer you bought it from. Failing that you will either have to upgrade your O/S, or give up some of the functionality of the monitor.

Thank you for the opportunity to assist you in resolving your issue. Should you need further information or assistance please do not hesitate to let us know.

Feb 16, 2011 | Acer X193W 19" Widescreen TFT Monitor

1 Answer

Installed windows 7 on a dell sx260 with gem 17 lcd cant get display drivers to work?screen all dis colored

Try going to the Dell or Microsoft Websites and loading a new display driver for Windows 7. When I first got Windows 7, both my monitor and printers required new drivers for Windows 7. It seems that Vista and XP drivers for a lot of things don't work on Win 7.

Good Luck

Dec 08, 2010 | Scanport GEM GL-821A/B 17" Flat Panel LCD...

1 Answer

I have an Envision EN 7100s monitor. It works just fine when I run the computer in safe mode, but when I try to start the computer normally the screen will go blank after the microsoft logo and say "Input...

Doesn't really sound like the monitor is the cause. The video driver sounds like it might be failing on load. You can try starting in safe mode, open device manager and remove the video card from the hardware list (You can also do this with add and remove hardware in the control panel of XP). Restart and let windows install fresh drivers on start up. This may help if the driver installation has been corrupted. Note that you will need the original driver disk if you want the extended options of your video card, otherwise windows will install the generic windows driver which in some cases is no different from the factory driver.

Hope this helps,

Oct 07, 2010 | MPC Computers Envision EN 7100s 17 in....

1 Answer

LG Flatron L1750H

Hi there, my name is Alex and I am here to help solve your problem.

When adding a new monitor to your computer, it is not necessary to install the monitors drivers as it should detect 'Plug and Play monitor' and will install the monitors drivers automatically. Are you getting any error messages?

If you have any questions or needing further assistance, then please contact me.

Oct 10, 2008 | LG Flatron L1750H (Silver) 17" LCD Monitor

1 Answer

Fx700 mdl.321a

After searching and searching I get the same reply, it is NOT conpatable with win xp. There are no drivers for this monitor that will work with win xp. I beleave that this monitor has drivers for win 95 only??? Not positave but its all i came up with.

Nov 01, 2007 | Compaq Presario FX700 17" CRT Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

329 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers


Level 3 Expert

98879 Answers

David Payne
David Payne

Level 3 Expert

14089 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides