Question about Projection Televisions

1 Answer

I have a daewoo ds608p but for some reason when you scan for channels it does not find any. I have tried another digital receiver and this works fine. When I check the signal strenth on the daewoo this is fine also.

Posted by on

  • Terry Powling
    Terry Powling Aug 25, 2008

    Freeview DS-C60P8 Daewoo scans but no channels found. Tried on another aerial and still nothing. Checked on Bluebell hill and no probs reported. Analogue signals ok. 5V regulator in psu had dry joint but did not remedy. All boards seem fine no other suspect joints. Signal strength on freeview nothing shown. Am tv engineer so can solder. is it tuner fault?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

It is an issue with the box
Contact Daewoo and sak for a refund.
Watchdog reported this on MOnday rd November 2008

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Digital tv tuner not displaying picture


. Try putting you tv set to channel 3 or 4. Try your tv in all modes. Check the back also to see if in the right spots with the wires. Check your channel scan status, try it on anntena and try it on cable, run channel scan on both. good luck. Try vcr wires if cable wires dont work. vcr wires are yellow red and white. Try another cable cord sometimes they get old. Try looking at your remote and setting it to tv.

Sep 02, 2012 | Panasonic PT-50LCX63 50" Rear Projection...

1 Answer

Digital switch


did you switch the antenna setting over to air then scan for avaialble channels

Jun 23, 2009 | Sony KDF-50E2000 50" HDTV

2 Answers

My Daewoo sv900 is scanning but not finding any channels


I owned a Daewoo VCR/Digital Receiver SV900 which was wiped out by the last change.
I started complaining to Daewoo who at first were not keen to get involved - I kept on at them and I negotiated with Daewoo for a replacement -

I ended up with a DSD9503TFB which is a twin Freeview tuner with PIP and a 160 GB Hard disk - I paid a cash balance of £ 15 as at first they wanted to give me a cheaper unit.

So it shows that if you complain loud enough ‘you do get results’

The DSD9503TFB arrived the other day and they picked up the SV900.

The picture quality is more Colourful than my other units so I had to tone it down a bit. { I can view seven other Freeview unit so its easy to do a comparison }

So far the Hard disk is silent and the Recording quality is excellent.

It was such good PVR I bought another one which will arrive on Monday.

All in all a ‘ Good result ‘ and ' I am not the only one '

So if you have a genuine Claim against Daewoo I would advise that you keep at them - they take ages to reply to e-mails but stick with it.

contact colin.millard@desuk.co.uk and quote ' Split NIT '

I have listed the Pro's and Con's of the DSD9503TFB at
http://www.wbc-team.co.uk/Daewoo-review-2.html

Aug 29, 2008 | Projection Televisions

1 Answer

Daewoo ds608p cka not picking up a signal have scanned several times but not finding any channels?


I have not resolved the problem i am waiting for you to come back to me! I was given the option of signing up for the premium plan which i declined so presumably i will not get the free advice offered?

Aug 29, 2008 | Projection Televisions

1 Answer

I have a Daewoo DS608P Freeview box which will not detect any chennels. The pre=scan and scan appear normal, but nothing is detected. The TV, which has no Scart socket, works fine on analogue, and I have...


Sorry to be the bringer of bad news but the transmission mode in the uk is changing & that is why your box will not pick up any channels have a look on http://www.freeview.co.uk/help/faq/id104963 I'm affraid your box is finnished.

Jul 25, 2008 | Projection Televisions

2 Answers

No channels can be detected have tried 2 Daewoo DS608P boxes connected to same telly but same thing happens. Signal strength seems fine boxes have been working fine for years.


I am the same. Not a sausage from my same model Daewoo freeview box today. Scans and re-scans and not a single channel to be detected.
Rob

Jul 05, 2008 | Projection Televisions

1 Answer

Red flashing light and no channels on Daewoo DS608P


blinks red light then with sound for a couple of second, then turn off by it self no light on the projectorlens

Jul 02, 2008 | Sony KP-51WS510 51" Rear Projection...

2 Answers

Can't get cable stations


you have to go into the menu and set for cable then scan for active stations.

Mar 15, 2008 | Projection Televisions

2 Answers

Grundig colour tv lost digital channels


I'm sorry, but I have not worked with Grundig TV's, radios yes, TV's no. However, The menu shouldn't be hidden. The first thing I would try would be to UNPLUG the set from the wall, wait about a minute and plug it in again. This action should reboot the micro processor. On some sets, there are two levels of menus, main and advanced. You would want "channel setup" and /or channel scan. You may also look in the back of the manual and see if it list some service dealers that you could call for help. I hope this helps.
Electrode

Mar 03, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

92 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...