Printer won't print. . . .ink cartridges full but pages are blank

Do you mean your Epson Printer Printing blank pages? The Epson printer printing blank pages due to wrong paper size, outdated printer driver, Empty ink cartridge, dirty print head, improperly installed ink cartridge, and more.

Follow the steps to fix the Epson printer printing blank page issue:

·Restart the printer
·Fill the empty ink cartridge and reinstall the new ink cartridge
·Update printer drivers. If you have done all the above steps but still the printer printing blank pages.

Then follow more steps to fix the Epson printer prints blank pages issue.

Epson printer printing blank pages, when you have an empty ink cartridge, outdated printer driver, printer print head missing, improper ink cartridge installed, and more.

Follow the steps to fix the Epson printer printing blank page issue:

·Restart the Printer
·Fix the empty and damaged ink cartridge
·Clean the dirty printer print head
·Update the printer driver

Read more steps to fix the Epson printer printing blank page issue.

I had a Epson printer that would not print or even allow me to use the scanner because the colored ink was out. Even though I had full black ink, it still would not let me print until i replaced the colored ink.

Had this exact problem after blowing some leaked toner out with an air compressor. Cleaning the 4 mirrors behind the cartridges fixed the problem!

Print a diagnostic page If the steps above have not helped, print and evaluate a diagnostic page to see if the cartridges or the printer is causing the problem.

1. Make sure the printer is on and loaded with unused, plain, white paper.
2. Press and hold the Power button and then press the Cancel button. Release both buttons. The diagnostic page prints. Figure 1: Power and Cancel buttons 1 - Cancel button 2 - Power button

Step 4: Note which cartridges printed which areas of the diagnostic page You must identify which cartridge printed which part of the diagnostic page, so that if you find defects on the page, you will know which cartridge is the problem. However, you can install different combinations of print cartridges in your printer, and different cartridge combinations print different diagnostic page patterns. Your diagnostic page may not look exactly like the picture below, but the right and left cartridges will print in the same areas of the page no matter which cartridges are installed. Figure 2: Diagnostic page layout (the patterns in each area may look slightly different on your page) 1 - Printed by the right cartridge 2 - Printed by the left cartridge NOTE: If you are printing in reserve mode (one cartridge is missing), the missing cartridge's area of the diagnostic page will be blank. Step 5: Check ink levels NOTE: If you have installed a refilled or remanufactured ink cartridge, or a cartridge that has been used in another product, the ink level indicator is inaccurate or unavailable. Look in the middle of the diagnostic page. The bars with "E" (for "empty") and "F" (for "full") at each end show the ink levels in the cartridges. As ink is used, the solid color changes to a faded color. Figure 3: Left (tri-color) cartridge almost full - right cartridge empty Figure 4: Both left and right cartridges almost full

you need to change the print head ...

remove the ink cartridges and use a qtip dipped in rubbing alcohol and GENTLY clean the printhead on the cartridge. Reinsert and try printing again. If it prints anything at all, keep going till it becomes normal. If still nothing, replace the ink cartridges.

Did you try to wipe the cartridge.Maybe there's a clogs. inside.

Try checking the ink cartridges and make sure they have ink in them or it will keep printing blank pages. Then try printing a test page by going to control panel, clicking on printers and faxes and right clicking on your printer and going to properties. Then go all the way down to the bottom of the page and click print test page. It will clean the printer cartridges and align them to print correctly. It should work after that.