Question about Projection Televisions

Open Question

Echostar T105 Digi Box Displayed on screen Rescue 2 hours. No pictures etc

Posted by on

1 Suggested Answer

  • 1 Answer

SOURCE: echostar t101 fta digi box

This is due to NIT in DVB-T transmission

Digital UK estimates that "only 1%" of Freeview receivers are susceptible to this change - technically, the introduction of a multi-part Network Information Table within the digital data.

The effects on some of those STBs and VCRs are plainly malfunctions, such as abnormal channel numbering e.g. Channels may be listed, but they're assigned to all the same number or assorted incorrect numbers. Alternatively, no pictures are seen, despite all channels having high ratings for signal strength.

Posted on Dec 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have bought a digi box for this tv but can not tune the tv


hello make sure the aerial is connected to the digi box then a lead from the digi box the the tv also connected a scart lead from the digi to the tv the go into the menu choose first time installion click ok the it should search

regards
shaun

Mar 27, 2010 | Projection Televisions

4 Answers

How do I make the picture fill the width of the screen. I see a 16/9 and 4/3 buttons but they only make the picture taller, I need to make it wider. I have a Vidikron Kronos One projector.


Hi,
Could you please give me more detail as to what you mean by make it wider. Is the picture currently using the width of the projected image? Have you used this projector before? Once I have more information I can assist you further.
Thank you,
Lee

Feb 08, 2010 | Projection Televisions

2 Answers

Our TV picture is bowed inward and lettering is 3D. How do we fix this problem?


Go to Menu then to setup if you do not see Convergence in the menu then you have a blowed Fuse FL231 it will be on right hand side of FBT flyback Transfomer there is 3 in a roll it will be the Middle one they are small brown rectrangler Looking caps but are Fuses Located on the Deflection board Bottom Left hand Board.

Dec 24, 2009 | RCA Projection Televisions

1 Answer

BOW PICTURE AND HUE GREENS REDS AND BLUES LIKE SHADOWS


the tv had intermittant solder connections already but h\they appeared when the tv was moved to hook up the digi-box. The solution could be as simple as resoldering the power convergence amps.

Aug 06, 2009 | Projection Televisions

1 Answer

Echostar t101 fta digi box retuned and lost bbc1 bbc2 itv and channel 4 all to channels 801 and above any help and advice would be very kind


This is due to NIT in DVB-T transmission

Digital UK estimates that "only 1%" of Freeview receivers are susceptible to this change - technically, the introduction of a multi-part Network Information Table within the digital data.

The effects on some of those STBs and VCRs are plainly malfunctions, such as abnormal channel numbering e.g. Channels may be listed, but they're assigned to all the same number or assorted incorrect numbers. Alternatively, no pictures are seen, despite all channels having high ratings for signal strength.

Sep 04, 2008 | Projection Televisions

2 Answers

Do not understand how to set up my alba digi box to my television and recieve basic digital channels help!


Hi.

Ok
1) plug aerial in to the antena in sock on freeview box.
2) plug short aerial type lead in to rf out socket on freeview & antena in socket on TV.
3) plug A scart lead in to the socket marked TV on freeview box & the other end of scart in to one of the scart sockets on the TV.
If your TV has more than one socket plug it into the one marked AV1 or AV2.

4) plug in freeview to mains electricity & switch box on.
5) Turn TV on freeview should appear automatically if it doesnt look on your TV remote for A button marked AV or a button with either A circle or square with an arrow going through it you may need to press this several times until you see digi picture come up.
Thats basically it but do check that you dont need a new aerial etc to be able to get digi signal in your area.

http://dysonmanuals.llc.nu/

Jul 26, 2008 | Projection Televisions

1 Answer

WHARFEDALE LCD2610AF WHEN I TURN ON DIGITAL I HAVE PERFECT PICTURE &SOUND.AFTER 10 TO 30 MINUTES THE PICTURE FREEZES AND THEN SCREEN TURNS WHITE WITH AGREEN HORIZONTAL BAND LOWER HALF OF SCREEN.WHEN...


Hi.

If the picture & sound are ok in analogue mode then chances are you have problem with digital tuner.
This may be expensive to repair so I would advise connect external freeview box or sky etc to get digi channels using scart to connect to your TV.

Jul 16, 2008 | Projection Televisions

1 Answer

Hi I have just set up


Ok, have solved it!

I hadn't placed the "magic eye" in the right position on the Sky digi box.

Now have Sky in my kitchen, a good picture, sound and the remote works great!

Mar 20, 2008 | Philips Projection Televisions

1 Answer

Sony tv doesn't work


If the picture looks like picture#1 and the Menu can NOT be displayed the problem is the Q-Box assy part# A-1058-689-A If the picture looks like picture#2 and the Menu can be displayed the problem is the "B" board part# A-1060-168-D

Aug 29, 2007 | Sony Grand WEGA KDF-42WE655 42" Rear...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

61037 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...