Question about Audio & Video Receivers

1 Answer

Lost cd player code - Audio & Video Receivers

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,071 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.


hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Posted on Aug 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

CD player displays error code: ER-1


That error code means an unknown error has occurred. Try cleaning the player itself, along with the CD's prior to insertion to see if that helps.

Feb 02, 2014 | Dual XD1228 CD Receiver

1 Answer

I own a Sony CD Player.. Model CDP-CX255.. and have misplaced or lost the manual to enter the CD Labels from the CD to the player with the remote... Need help... Thanks, Sid


Hello Sid

OK, at the link below you will be able to download the user manual for this unit.

Click HERE to navigate to the download page.

Please let me know if you found this helpful by rating. Also, please do not hesitate to let me know if you need any further assistance.

Kind regards
Andrea

Sep 08, 2010 | Audio & Video Receivers

1 Answer

How do i program for sony cd player


I also have a Sony CD player (CDP-XE330) and I have tried almost every code from the yamaha manual, but without success.
The only codes that yamaha remote supports, are the codes from the list in the yamaha manual. If none works, you are out of luck and the only solution is using the original sony remote (if you have one) or universal remote.

I have recently purchased Logitech Harmony 525 on eBay and now I control all my 7 devices with it without any issues. It is programmed via USB and Logitech has codes for almost 250.000 devices.

Sep 16, 2009 | Yamaha RX-V361 Home Theater Receiver

1 Answer

I bought a car cd player from a friend...it came from his 306 pegeout .....i then put the cd player into my car and punched in the secuirty code and all was fine... 2 years on I got a flat battery and do...


No, you;ll have to throw yourself to the mercy of the folks that made the head unit and see what they need to bail you out on that. I'm sorry that I cannot and don 't know any other way...accordianman

Jul 28, 2008 | Audio & Video Receivers

1 Answer

Hi, I took off my car Kenwood CD-player and installed it into my new car but unfortunately it doesn't work anymore because once i turn it on it asks me to enter a code.Can you,please,send me this code...


Dear Memo,
you can download the manual for this ,player, from this site:

http://www.devicemanuals.com/guide/Car%20CD%20Changer/Kenwood%20French/Kenwood-French-KDC-MP625-CD-DVD-Changer-Owner's-==TVRFd05qVXk=.html

in this manual you can get the security code for this Player also.


Cheerup and be happy always

Mar 27, 2008 | Audio & Video Receivers

1 Answer

CD player code


I contacted the local Daewoo dealership and they faxed me a list of all the codes. Unfortunately, you have to try all of them to find the one that matches your player, but I finally got it.

Mar 25, 2008 | Audio & Video Receivers

1 Answer

Remote controll


Try these: 0055,0605, 1095....taken from my RX 520 remote codes...might work.

Sep 05, 2007 | Audio & Video Receivers

Not finding what you are looking for?
Audio & Video Receivers Logo

Related Topics:

191 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio & Video Receivers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you an Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...