Question about Modems

1 Answer

3 zte usb broadband

I cannot access my account since i lost my password (although i dont need to to topup) i was told my new password was in my sms folder i try to open this but cannot

Posted by on

  • Anonymous Jan 11, 2009

    I have AC ZTE8710 CDMA device , it my provider speed 2.4 mbps
    but i realy connect it only 921 kbps link speed , how to speed up,
    or hardware hack.???

×

1 Answer

Is there anyone who knows hot to boost ZTE AC8700

Posted on Oct 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can this be used as a 56k router? I need to have a temporary internet connection and it is only a basic connection because of the type of phone there is at the house. We tried to connect but I don't have...


The SB4100 is a digital modem that uses cable TV network to provide broadband Internet access, it can't work with an analog telephone line, for this type of Internet access (also called switched Internet connection), you need an analog internal or external 56K modem, and also you'll need a user name and password (an account) from the Internet provider service (ISP) ; for a temporary Internet connection maybe a prepaid cellular modem (GPRS, EDGE, 3G or 4G) USB type could help you better.

Feb 27, 2011 | Arris SURFboard SB4100 Modem

Tip

HOW TO SET UP SPEED TOUCH 5X6V6 BROADBAND MODEM


Once you have an Internet Service Provider ,ISP,
you just need a modem and phone line access,
plug modem into phone socket and then into the computer,

My example modem is.........

Speed Touch 5x6v6 - Broadband Modem
Operating System is Windows 7

log on to the modem using Internet Explorer Bar
Type 192.168.254
this will open the modems log on menu
then enter user name and password
its factory default is
user ADMIN
password ADMIN or 1234

once open there are some menu options on the main page

Speed Touch,
Broadband Connection,
Toolbox,
Home Network,

to add new user and password,
go to toolbox,
user management,
add new user
add password,(write down username and password)
change default user
save and test
should have a green tick next to new default user now

selecting broadband ... shows both your,
dsl connection and internet connection status,
with a green tick next to each heading.

Home network will show you...
all devices connected to this modems network ie
the other computers and printers etc,
connected on your network.
In network ,select your computer in the menu tree,
select configure
this give you a menu to add info about your computer
ie name info, comupters ip address,
access to the local intranet or the internet

Now lets connect to the internet

select Broadband from front page
menu will open and display
DSL & Internet Connections
here we test internet functionality.on? or off?

Now we go to your computer,
go to start
my network connections
run wizard in my network places
select new connection
follow prompts to the end.

open internet explorer
if web page opens then we are done and finished,
or
open tools and internet options,
connections and then lan settings
select automatically detect
Apply then close
Test webpage again,
when ok shut down and restart,
to save the computers new settings ,
Test again with internet explorrer.

if no connections run wizard again,

Hope this Helps,Cheers Misterdj

on Apr 18, 2010 | Modems

1 Answer

Its ipaddress and password


Ok, (I am assuming you run windows here)
In the start menu, open "run" (or hit windows key + R)
in the run box type "cmd" and hit enter
in the black window that pops up type "ipconfig" and hit enter
now providing you are connected to the router, the address listed as "default gateway" is the one you will need to put into the browser to access its configuration.
If you dont know the password then you'll need to reset it. The reset button resets the router to its factory default settings. It's really there for if you forget the password into the router you can reset it and set it up from scratch again. Beware of this button because you will have to set the router up again if you press it - including your broadband username and password which most people have long forgotten and lost the documentation for!
Please please remember to vote if my solution was helpful to you, and if I did not help then please let me know and I can try further steps to assist you :)

Nov 01, 2010 | Zyxel Prestige 841 (91-004-226010) Modem

2 Answers

I want to use my cricket wireless modem with ps3


Hi,
You can connect with the PS3 2 ways >>>>>>

1, wireless, make sure that you have an internet connection first with a computer and that you know your network name and password (if you have one set up).
Go into the PS3 menu and scroll to the network config section, and set up a new network, where it says SSID this is the name of your network, for example SKY1234.
Then it will ask you for a encryption type, for example WPA or WEP and then your password, input your password and let the PS3 do the rest, if there is anything wrong it will tell you.

2, wired through an ethernet cable, again go to the network config section in the PS3's menu and set a wired connection, it will not ask you for your SSID or password as its a wired connection.

If you need anymore help or advice please feel free to post back.


Good luck.

Jul 20, 2009 | Westell Wirespeed LiteLine 6110 Modem

1 Answer

Forgot my password


Lost passwords are never good. Not all hope is lost, so long as you aren’t using the master Administrator account. You didn’t specify which operating system you were using, but this tip is for XP only, as the main Administrator account is disabled in Vista by default.First thing you’re going to do is reboot your computer. When it comes on, press the F8 key (you may need to tap this a few times, just to make sure you’re hitting it at the appropriate time). You should be greeted with a prompt for booting into Windows, select Safe Mode. When the computer finishes booting, you should see an account labeled Administrator. Try to log into this account. If no administrator password was setup when you installed Windows, it may let you right in. Otherwise, you’ll need to remember that password that you set.
Once in this account, head into the Control Panel and access the Users area. You should be able to select the account you generally use, and reset the password. If you can’t get into the main Administrator .
Some BIOS manufacturers implement a backdoor password. The backdoor password is a BIOS password that works, no matter what the user sets the BIOS password to. These passwords are typically used for testing and maintenance. Manufacturers typically change the backdoor BIOS passwords from time to time.For example generally
Manufacturer BIOS Password
Toshiba Toshiba

Apr 18, 2009 | Modems

2 Answers

How to install zte 831 aii Broadband modem in Linux with USB


I was working at one of Lithuanian internet service providers. We often had clients complaining about ZTE 831 connecting through USB. The answer is - use a LAN card. Sorry.

Mar 13, 2009 | Modems

1 Answer

USB Modem V ADSL Router/Modem


Unplug the plug (from phoneline) on back of USB modem, plug into Zoom router. Plug one end of an ethernet cable into router and one end into your PC. Type http://10.0.0.2 into a web browser (eg. Firefox or Internet explorer) username/password is admin/zoomadsl go to basic setup and input your ISP username and password (the one given to you by your internet provider) under PPP. Click configure my connection. Save changes and then write to flash (both buttons on bottom of page)

Aug 12, 2008 | Zoom X6 Adsl Modem/router Rohs...

1 Answer

Username /password to change


to change username and password in dlink router you have to access http://192.168.0.1 in the address bar of internet explorer
it will bring you to the configuration screen of dlink.. it will ask for the dlink usid and password, the default userid is "admin" , for the password leave it blank.
  1. The router's Web-based Setup Utility should appear. Do not run the wizard. Select the WAN button on the left-hand side of the screen.
  2. Select the PPPoE and Dynamic PPPoE options on the WAN settings screen.
Enter the your USERNAME and PASSWORD that your broadband connection provider gave you into the corresponding fields and select Apply and then Continue.
Once the screen refreshes, exit the browser.

now try to connect

Jul 18, 2008 | Modems

1 Answer

4100 no driver disc


hi!
make sure you have the new account name registered, (or if former account is still active, you can have it re-registered) you can also call on your ISP to let them register your account. if you already have a username/ password, access this modem by going to 192.168.0.1, click on advanced > connection configuration. if it asks you to enter the modem access code, locate it at the bottom of the modem. then on the user id box type your account name or user id and type the password as well, click on save changes. it will prompt you to restart the modem. please do so, check on the modem lights; power, ethernet, dsl and internet should be solid green, activity will be blinking on/off, then you've got good connection & you're ready to go. Note: this modem doesn't need a driver, it already has built-in pppoe software....

Jan 24, 2008 | Siemens SpeedStream Modem (4100) (SS4100)

2 Answers

Speedstream 4200 setup


I have just set up 4200 with dsl - you may find that you need to reset modem before you can configure. I was told that you need either a grey or yellow cable from your laptop to the modem. I use 10.0.0.138 to access modem. The 4200 I have was from a bigpond a/c - originally configured accordingly.
Regards,
Richard

Nov 12, 2007 | Siemens SpeedStream Modem (4100) (SS4100)

Not finding what you are looking for?
Modems Logo

Related Topics:

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Modems Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Are you a Modem Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...