Question about Kirby Vacuums

3 Answers

Broken fan need a repair man or service centre. If not a replacement fan for self repair. I live on the Gold Coast Ray is my name. Kirby Legend 1 model 2HE

Posted by on

  • 3 more comments 
  • 1arrows Jul 31, 2008

    Is there a Kirby service/repair centre on the Gold Coast or Brisbane any help you can give me will be appreciated. Ray

  • 1arrows Jul 31, 2008

    I am sorry but you have not given me an agent or service centre,that I can work with.

  • 1arrows Jul 31, 2008

    The vaccumn cleaner service/repair/parts that you have recommended so far do not apply to Kirby vacs. I have already tried numorous technitions out of the yellow pages

    without success.

  • 1arrows Jul 31, 2008

    You keep on sending me www.ultimatesanitarysupply.com they do not handle

    Kirby vaccumn cleaners. If you do not know who does, please let me know and

    I can get on with finding them some other way. Ray

  • 1arrows Aug 01, 2008

    It is obvious you do not know of Kirby appliance service.

    I have found one in Woodridge Pilbi St Kris 0732900164.

    Thank you for trying, I will not need your assistance now Ray

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 813 Answers
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 382 Answers

Hello Ray,
Try to contact The following repair man in Gold coast..They will Send you a service man and excellent service backup...


Call:
(865)945-3808
mca0824 @aol.com


Thank you!!

Regards!!...

Posted on Jul 31, 2008

  • 3 more comments 
  • Natesan Sabesan
    Natesan Sabesan Jul 31, 2008

    For replacement try to search using your model in following link


    http://www.repairclinic.com/SmartSearch/...


    Thank you!!

    Kind Regardss!!

  • Natesan Sabesan
    Natesan Sabesan Jul 31, 2008

    Hello Ray,

    Please check the following link to find an authorised Kirby Service centre in Gold Coast...

    http://www.australiabigbook.com/4909/1



    Hope it helps you..Dont forget to rate my solution!!...

    Kind Regards!!...


  • Natesan Sabesan
    Natesan Sabesan Jul 31, 2008

    Check the second link which i have posted ,Its just a service centre..When you contact a centre they will send you the service person!!...Hope you understand!!..

  • Natesan Sabesan
    Natesan Sabesan Jul 31, 2008

    Check out the following service centre then!!

    #Breens Vacuum Cleaner Centre (VACUUM CLEANERS) (GOLD COAST) (Australia)
    Range of reconditioned machines with a large selection of bags, accessories & spares
    .
    Address:: Shop 7, The Albert Centre, 46-50 Spencer Rd NERANG 4211 QLD
    Phone: 0755965811 Other Phone: 0414480322 Fax:: 0755966722
    Contact: Cheryl or Leighton

    ----------------------------------------------------------------------

    E & G Gordon Electrical P/L (VACUUM CLEANERS) (GOLD COAST) (Australia)
    Service & installation of ducted vacuum systems
    Address: 13 Hood Ct MERMAID WATERS 4218 QLD
    Phone: 0755751549 Other Phone: 0414389523 Fax:: 0755751548
    Contact: Eugene Gordon



  • Natesan Sabesan
    Natesan Sabesan Aug 01, 2008

    Hope you dint see my Comment still ...The address of the service centres i have put up are authorised service centres of Kirby...Do check it out...

    Regards!!..


×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

Hi rey!!!

just go to this links! click here and click the repair service!

Thanks!

Posted on Jul 31, 2008

  • carlos fernandez Jr.
    carlos fernandez Jr. Jul 31, 2008

    Just enter your Zip code here then you will see the repair man near you! click here Thanks!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Switch on Kirby G3 does not work


to tricky to self repair, you have to strip the motor down to replace speed switch, contact your local kirby service centre

Jan 11, 2013 | Kirby Vacuums

1 Answer

The brush on my kirby won't turn


It may have something caught in the roller mechanism if not the belt that drives the roller may have broken or slipped off. If the problem is neither of these then the motor that drives the belt to drive the roller may have failed, Please take to an authorized service centre and have it repaired or replaced if it does not cost more than a new vacuum if it is going to cost more than a new vacuum then discard that machine and purchase a new one. I hope this helps.

Sep 13, 2012 | Kirby Heritage I and II, and Legend I and...

1 Answer

I need a manuel to replace a broken fan on my g4 kriby


Hello,

We have actually recorded a very informative do it your self video on how to replace the fan on a Kirby Generation upright.

The video is a two part video, but this explains step by step how to remove the old fan, and put the new one on.

If you need to purchase a new fan assembly, here's a link to the Fan assembly for your Kirby G4. Unfortunately you may only purchase them as a complete assembly:
Genuine Kirby Vacuum Fan. Kirby Part # 119096S

Here's the videos showing how to replace the fan:

Part 1:

Part 2:

Hopefully this helps you with your problem! If this did help, please be so kind and rate the repair, or leave feedback for me. This is very appreciated by the Fixya community when someone is able to answer your question, and assures that experts continue to answer free questions, instead of just the premium paid questions.

Thanks again!

Chris Jones
GoVacuum.com

May 15, 2010 | Kirby G4 Bagged Upright Vacuum

1 Answer

How do you put a new belt on heritage legend 2


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=832437
Generic problem for all Vacuums
How do you put a
Posted by boogerjrjr on July 25, 2008
How do you put a new belt on Kirby Heritage Legend II
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. . The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 25, 2008 | Vacuums

2 Answers

Kirby Legend II


http://geeksquad.fixya.com/ThreadView.aspx?prdid=11558&thid=818960
Kirby Legend II
Posted by smokey 1 on July 22, 2008
Hello, Help please, Using my vacuum, turned it off briefly, then went to turn it back on and it would not .I checked plugs which were both fine. Motor is strong, impeller is fine. The light comes on near the button to turn it on however it's not doing anything. Switch maybe? Just a guess. Thanks for your help! Alice
Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. It can be only one of 2 things, either it could be the safety switch or the foot switch and they would have to be replaced. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 22, 2008 | Kirby G4 Bagged Upright Vacuum

1 Answer

I don't know how to change the brush. HELP Kirby legend 2 vacumm


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=767761
Generic problem for all Vacuums
I don't know how to
Posted by mcwalworth on Jul 10, 2008
I don't know how to change the brush. HELP Kirby Legend II vacuums

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. To change the Kirby brushroll is to dial the belt off of the fan pulley and unlock the head to the bell housing, the head will come off. Then you turn the head over and remove the bottom plate by 2 levers the brushroll will be attached. Remove the brushroll and replace it with the new one with the screw head facing down to the carpet. Replace the bottom plate and install a new belt. The belt install on a Kirby is to raise the height adjustment to the highest level and then dial the belt off counter clockwise so it is loose and not on the fan pulley, release the top lever on the bell housing, then remove the bottom plate and unhook the brushroll on one side, slide the old belt off and then slide the new one on, replace the brushroll with the screws facing the carpet and re-hook the bottom plate on the Kirby. Then take the bell housing and hook that back on to the Kirby and lock it down. Then dial the belt on clockwise all the way and the belt should be on the fan pulley. The belt should be ready to go, plug in your Kirby and then do the step down on the vacuum height adjustment until the tone changes, then try to see id it picks up, if not go one more height adjustment and that should be the correct setting.

http://kirby.com/
Customer Service – U. S. & Canada
1-800-494-8586
Hours 8:00 am to 5:00 pm (EST)
Mail To: Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jul 10, 2008 | Vacuums

1 Answer

Hi I am looking for some where to get my kirby legend 11 vacuum cleaner serviced and probably a new brush head for it thanks


http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=722285
Generic problem for all Vacuums
Hi I am looking for
Posted by libbit1 on Jun 30, 2008
Hi, I am looking for some where to get my Kirby Legend 11 vacuum cleaner serviced and probably a new brush head for it thanks.

Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. In most cities there are factory authorizes Kirby Vacuum dealers that also do service in most of the big cities other wise there are your local vacuum cleaner dealers in your area that also do service on the Kirby vacuums. When referring to the brush head are you asking for the bell housing or the brushroll. The brushrolls are very available @ either dealer but the bell housing that the brushroll fits into you probably will need to get that from the factory or the local vac dealers may have a good used one for less money or ½ the cost of a new one. Just a suggestion for you. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
Mail To:
Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 30, 2008 | Vacuums

1 Answer

Kirby Heritage 84


http://geeksquad.fixya.com/ThreadView.aspx?prdid=11562&thid=699518
Kirby Heritage 84
Posted by sixbrocks on Jun 23, 2008
I can't figure out how to get the belt engaged on my Kirby Heritage 84. There are very simple instructions on the front assembly; however, the belt doesn't engage with the rotor, and the beater bar does not spin. When I have the front twisting section on the "Belt On" setting, it seems as though it actually disengages the belt. I see no faults in any of the mechanical parts, but just can't get the belt to go on the rotor.
(I purchased this machine @ a garage sale on Saturday. It's in perfect condition.)
My vacuum cleaner is a Kirby 84 Legend.
Help! Jennifer


Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always check your owner’s manual but the Kirby has a dial on the front of the machine and you needs to dial the belt off of the fan pulley counter clock wise and to check to see if the Kirby bell housing will release @ the top so that you can remove the bell housing. If not then remove the bottom plate and take out the brushroll on one side and then slide the belt off of the brushroll. Then you can slide the new belt onto the brushroll to the center and then re-insert the Kirby brushroll with the screw heads facing downward then you can replace the bottom plate – then use the Kirby spoon or hook to dial the belt onto the fan pulley clock wise. Once that is done then plug in the Kirby and try to vacuum to see if the Kirby is picking up properly, if not repeat the process. If you have a question, feel free to contact your local vacuum cleaner dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
Mail To:
Consumer Relations
The Kirby Company
1920 West 114 Street
Cleveland, OH 44102
Thanks, Don the Vac Man
Go Ahead. Use Us.

Jun 23, 2008 | Kirby Heritage II Vacuum

Not finding what you are looking for?
Vacuums Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kirby Vacuums Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Roger Potts

Level 3 Expert

694 Answers

Are you a Kirby Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...