- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Changed transmission mode to normal in order to get rid of EMC error. Caution! depends on your telephone line or modem, for DSL is good for normal mode at 14400 bps else set it to basic mode at 9600 bps.
First plug in a normal tone tellefone into the wall jack that your fax is using.Make sure you get the fax signal from the faxnumbers you struggling with.If you can hear any line noises on the line it may be the problem why you cant get a fax trough.Make sure your fax is set on the correct county code-tone or pulse.
if its only a few % like 1, 2, or some thing its probably nothin retrievable, you can have a tech come and clear it but if all else is working and the mssage in mem file dosent keep growing try and ignore it till next service
Hi, Can you verify the error message to be 70? Error Codes for the 4100 starts at 71 as shown in the link below. http://tinyurl.com/yvcv35
It could be error 7D. You may try to remove the toner cartridge from the printer and slide the corona wire cleaner and put it back on. Do this with your fingers crossed. :-)
Error messages like these are not user serviceable. Another bet is to unplug the unit, wait a couple of minutes and plug it back again. If the error persists, professional service is required.
Please check rear door area for paper, can you use manual feed slot? Power off machine with all jams removed and paper loaded, then power on, can you tell us exact error message/lights that are shown in this state?
Where the telephone line comes in from the wall, make sure that it is plugged in the "line" or "wall" port. There is probably another port call "tel" or "acc". If the line is plugged into that port you will still get a dial tone but you are not connected to the fax's modem. You hope that's it.
first clear all files from the memory cards (if there is)
enter "001" and press "set" to delete all files
enter "1" (page 143 )
take the battry out (page 196)
unplug the device for a day and assemble it
hope it works
003 - Recording paper jammed when feeding from the 3rd cassette. Remove the jammed paper.
(1) Open the Printer Cover.
(2) Remove the jammed paper.
(3) Slide out the Paper Cassette.
(4) Remove the jammed or wrinkled paper and reload the recording paper into the paper cassette.
Caution: Make sure that the paper is set under the clips of the Paper Cassette. You can load about 500 sheets with standard weight paper (20 lb. or 75 g/m2).