Question about Mitsumi (11-08004) (1108004) External Floppy Drive

6 Answers

External floppy drive does not work on this pc but on others

When external floppy drive is put in any usb, yellow warning comes up in device manager, states code 37 is missing

Posted by on

  • petergoodfel Jul 31, 2008

    cannot find any drivers to download, was on mitsumi site last night,I am not too experienced on computers

  • petergoodfel Jul 31, 2008

    I cannot find driver for external musumiD353FUE from there site, there is nothing with floppy drive, it's all cd's, I did what (smily) suggested, went to device manager ,clicked om floppy & uninstalled,then scaned for new hardware, didn't work, yellow is still there, on my usb connections it states my floppy drive is working , have XPMedia centre2005, when external floppy is plugged in usb port comes up & states there is a problem

×

6 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,011 Answers

Use anyother usb port and see if its solve.
moreover, have u tried any other floppy disc. it is the same for all floppies.

regards,

Posted on Jul 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,234 Answers

I think that you are looking in the wrong area. The problem is not with the floppy device, the problem is with the USB driver. Try uninstalling the USB driver and reloading that. Somehow the USB driver has gotten corrupted.

Dan

Posted on Jul 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,594 Answers

I am thinking, why you are using Floppy Drive in USB age?

Posted on Jul 31, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

Read this page
http://support.microsoft.com/kb/310123

code 37 should be fixable by reinstalling the devices, right click uninstall, and then click on scan for hardware changes to install it back , or uninstall and then restart the pc.

Posted on Jul 31, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 83 Answers

This is a Problem with the drivers in device Manager.

To Fix:

1. Uninstall the device from device manager by right clicking on it and choose uninstall. Then Scan for hardware changes by right clicking on the first one in the list (your computer's name) and choose "scan for hardware changes".

Also if the floppy drive came with a CD or DVD, you can use that to install the drivers as well.

You can request drivers from the Mitsumi manufaturer by going to this web page.

http://www.mitsumi.co.jp/english/Support/index.html

Posted on Jul 31, 2008

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers

Hello!!!

You have to install the drivers which has come with the external floppy disk!!!

Posted on Jul 31, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Citizen x1de-usb


If you have the disk... The drivers will still not install correctly using the usual method. Do this: Go to the system applet and find the yellow flag indicating the device is not installed correctly. Click on it and go to the box that says "Update the drivers". Put the disk in your CD/DVD drive and "kill" the inquiry box that comes up. Now tell device manager to find the drivers on your computer and point it to the CD drive. Click Install and they will install fine. You wont even have to re-boot probably.

Dec 12, 2011 | Iomega BXXU0130 144MB USB Floppy Disk...

1 Answer

TDK fdd-100 external floppy drive won't mount


check the leads that attach this external floppy drive make sure they have a good secure connection


click start control panel administration tools computer management device manager scroll through all of your devices

if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver


if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver

if you computer came with a motherboard disk the drivers could be on it
or you might have to download one

hope this helps you

Oct 31, 2011 | TDK External USB Floppy Drive FDD-100AX...

1 Answer

Usb problems


click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver
if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver if you computer came with a motherboard disk the drivers could be on
if you don

Aug 18, 2011 | Digital Research UNIVERSAL SERIAL BUS/USB...

1 Answer

Just bought a teac fd-05pub usb portable diskette drive. i have a dell computer with windows vista. when i pluged it in the device was installed, however the power light comes on for a few seconds then...


Hi,

The below is on the basis that the drive is visible in "Computer"...


This can be tow thing, one the drive is not receiving enough power from your USB port, try unplugging any addtional USB devices connected to the PC, if this doesn't work try a powered USB hub. Second the floppy disk is faulty or the drive itself is faulty.

Hope this helps, let me know how it goes.

Thanks

Jul 11, 2011 | Teac FD-05PUB External Floppy Drive

1 Answer

Usb floppy disk drive (SFD-321U/HP) drivers?


if you are having trouble with your drivers
here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver hope this helps

Jun 10, 2011 | Samsung SFD 321U External Floppy Drive

1 Answer

Drivers for nexxtech nefd2 floppy drive for windows 7


if you are having trouble with your drivers
here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver hope this helps

May 30, 2011 | NexxTech USB External Floppy Drive (NEFD2)...

1 Answer

I have a SmartDisk External USB 3.5" 1.44MB Floppy


well you I&hash39; have got problems the first thing i would be looking for would be a bad driver to this device if you are having trouble with your drivers
here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver
if the problem still persists check the leads that attach to this device make sure they have secure seatings or just replace them they could be faulty from overstreching
hope this helps

Apr 14, 2011 | SmartDisk USB Floppy Drive Titanium...

1 Answer

CANNOT FIND DRIVERS


if you are having trouble with your drivers
here is a general look at the drivers and how to update them
if your computer came with a motherboard disc the drivers could be on it
click start control panel administrive tools ,computer management ,device manager look through all of your devices if you see a yellow question mark?or exclamation mark ! or red x
right click to reinstall drivers or
if you can see your usb but its not working
ports(com&lpt)right click update driver hope this helps don

Mar 08, 2011 | SmartDisk USB Floppy Drive Titanium...

1 Answer

Usb ports don't work, out of the blue


I'm not a great fan of USB ....ever since a USB external hard drive decided to become undetectable halfway through a back up once ....

Since the problem occurred after moving the PC, the first thing that comes to mind is that some wiring has come loose .... but as it's a laptop that seem hardly likely.

Have a look in Device Manager (Control Panel/System/Hardware/Device Manager) ....see if there are any yellow warning marks next to any of the USB devices.

One trick that often works in these cases is to uninstall all the USB Root Hubs in Device Manager (right click each one and select uninstall/remove), then reboot the pC and let Windows reload the devices. Don't ask me why ....but this works 90% of the time.

Dec 31, 2008 | Dell Inspiron 5160 Notebook

1 Answer

External floppy drive does not work on this pc, states it's missing code37


Try unplugging computer power cable for 10 minutes, if computer is a laptop also remove battery for 10 mins, so to cut power to computer, this will solve problems caused by electrostatic charges on computer usb.
If it still does not work, than it means that windows drivers for usb are not working properly, in this case you will have to reinstall the system.

Jul 31, 2008 | Mitsumi (11-08004) (1108004) External...

Not finding what you are looking for?
Computers & Internet Logo

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsumi Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18386 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Mitsumi Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...