Question about Mitsubishi WS-65807 65" Rear Projection Television

1 Answer

MITSUBISHI BIG SCREEN TV MODEL VS-60607 CUTS OFF FOR NO REASON

MY MITSUBISHI BIG SCREEEN TV MODEL # VS-60607 JUST CUTS OFF AFTER A FEW MINUTES OF WATCHING AND THEN WILL NOT CUT BACK ON FOR SEVERAL MINUTE' ONCE IT DOES CUT BACK ON THE PROCESS START OVER AGAIN CUTTING OFF FOR NO REASON

Posted by on

  • 3 more comments 
  • Anonymous Oct 06, 2008

    my mitsubishi ws-65807 is acting up i turn the power on and green light comes on and 2 seconds later cuts off. i recently moved and tv worked fine before i loaded it on the truck got it to new house and doesnt work any more

  • varminator Oct 27, 2008

    I have the model ws 65907 with the same problem you described.  Is there any advice?


  • Anonymous Mar 23, 2009

    Mitsubishi vs-60607 lines in picture,picture jumps,down from top,then after a few min. shuts off

  • jpdurkin Apr 09, 2009

    my tv started cutting off after long hrs or use and has gradually gone to a few min or seconds now its hit or miss now wether ill be able to use it some days it works some days it turns off right away

  • Anonymous Mar 22, 2014

    my mitsubishi dlp tv wd60c9 has picture no sound it came back a few times muffled then once clear fornever to be heard again.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

My mitsubishi 65in projector model # ws65807Just started shutting off it only stays on for few seconds and cuts off. I cant get it to stay on

Posted on Nov 25, 2008

  • M Krob Dec 17, 2012

    scamad not helpful

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

VS-60607 turns on then off


2,1 is X-ray protection or excessive High voltage

It is a circuit repair or may be related to a Glycol leak

Mar 13, 2012 | Mitsubishi VS-60607 TV

4 Answers

MITSUBISHI TV VS-60607


HI there,

Check for any bad solder on the mainboard of the TV, and also check for any burn fuse on the powersupply area... BAd solder was very common problem on Mitsubishi TV..

micro

Jun 07, 2008 | Mitsubishi VS-60607 TV

1 Answer

My mitsubishi vs60607 the picture is too big for the actual screen. it's as if i set it to zoom mode but it does not have a zoom mode


Hi:
If you are using a cable box connected to the television for viewing channels, the box has a screen format button on it make sure its is not in zoom mode also. Check the box's remote for a button labeled format or Aspect or screeen.

May 17, 2011 | Mitsubishi VS-60607 TV

1 Answer

My mitsubishi vs 60607 big screen will not come on...green timer light comes on then off....tried holding down menu and input buttons and the code it gives me is 2 flashes and then 4 flashes...what does...


The 2,4 error code means a problem in the Vertical circuit.

This could (due to the age of the set) be bad solder connections at the vertical output chip or a part bad anywhere in the circuit.

Problem is in Vertical circuit.

If this told you something you did not know, rate this solution as very helpful as I do this here for free.

SD TECH

Aug 16, 2010 | Mitsubishi VS-60607 TV

1 Answer

Horizontal/vertical hold is off, picture is moving fom left to right Mitsubishi big screen vs-60607


You better take this fellow to a doctor. You have a stamp size IC with about 250 pins that is bad. Only a tech can replace this or reinstall a remanufactured board into this TV. You may ask the tech to use a freeze spray to find this IC first and then he wil decide how to operate!l

Jan 24, 2010 | Mitsubishi VS-60607 TV

1 Answer

I have a Mitsubishi VS-60607 Tv and it started out


Without going in with troubleshooting equipment it is hard to determine if the problems are related or not but it is unlikely since you seem to have a video problem and a convergence problem , which are two separate circuit(signal processing and deflection). Hope this help.
Please do not rate this answer(unless it helps)as it is only a suggestion.

Dec 03, 2009 | Mitsubishi VS-60607 TV

1 Answer

My picture is wavy, I have a mitubishi big screen model # vs-60607


sounds almost like bad caps okay this is where i would start is thier an option on the set to alighn convergence try that also okay may be bad module also okay its worth fixxing okay call tv shop

May 17, 2009 | Mitsubishi VS-60607 TV

1 Answer

Mitsubishi VS 60607 60" TV


From what i have been told the VS - 60607 was built in 2000 and i am not sure if it is HD or not.....

Aug 31, 2008 | Mitsubishi VS-60607 TV

Not finding what you are looking for?

Open Questions:

See all Mitsubishi WS-65807 65" Rear Projection Television Questions

Mitsubishi WS-65807 65" Rear Projection Television Logo

Related Topics:

1,110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1207 Answers

The Knight
The Knight

Level 3 Expert

73150 Answers

Jaime Hernandez

Level 3 Expert

2307 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...