My Datal Turbofire2 Xbox 360 controller won't connect to my computer.

Set up a wired controller
Step 1: Install the Xbox 360 controller for Windows software
Use the installation CD that came with your Xbox 360 controller for Windows before you connect the controller for Windows to your computer:

1. Insert the installation disc in the CD or DVD drive of your computer. If the Setup program does not automatically start, change to your CD or DVD drive and run the setup program.
2. On the setup screen, click Install.
3. The Xbox 360 Accessories Setup program installs the necessary files to your computer.Note You might be prompted to restart your computer after the installation is complete.

If you don't have an installation disc for your Xbox 360 controller for Windows, you can download and install the software online:

1. Go to the Software Downloads section of the Microsoft Hardware website.
2. Select Gaming as the product type.
3. Select Xbox 360 Controller for Windows as the product.
4. Select the version of Microsoft Windows you are using on your computer, select your operating system language, and then click Download.
5. Click Run.
6. The Xbox 360 Accessories Setup program installs the necessary files to your computer.Note You might be prompted to restart your computer after the installation is complete.

Step 2: Connect the controller to your computer
After you install the software, plug your Xbox 360 wired controller's USB connector into a USB 2.0 port on your computer.
Step 3: Test the controller
To test your Xbox 360 wired controller on your computer, follow these steps:

1. On your computer, click Start, type Run, type joy.cpl, and then press ENTER.
2. Select Xbox 360 Controller, and then click Properties.
3. Test your Xbox 360 wired controller by pressing a button, pulling a trigger, or moving a stick on the controller. If the controller is functioning correctly, you will see the corresponding action light up in the application. If the application does not recognize your controller, see Troubleshoot your Xbox 360 controller for Windows.

just buy a plug in and play it cost about 10pound or 10 euro

Did you try downloading the customizer from the website? The website is http://us.codejunkies.com/Products/Turbo-Fire-2-Wireless-Controller-for-Xbox-360-__EF000924.aspx click on the download and follow the instructions

You need either a blue Ethernet cable to connect the Xbox to an internet outlet or a wireless router. If you use the wireless router, hook it up to your computer so it broadcasts a signal, then, depending on what Xbox you have, if its the new 360 slim you won't need a wireless adapter, you search for the signal, then connect it. If you don't have the 360 slim, then you need to buy a wireless adapter and it plugs into the back of the Xbox.

if you have that charging cord for the original wireless controler try plugging it up to the xbox and see if that works.

It has a virus in it or it just sucks worst then the looney toons cartoons

All u have to do is hold the back, start, and menu button at the same time hold for @ 2 sec and it works

No, I'm afraid the Turtle Beach X11 will not work with any controller but the official 360 ones.

If the wireless controllers won't connect under any circumstances even with the Charge-and-Play Cable then you most likely have a problem with a board inside your 360, i think it's like the RF board or something, mind you, the C-P cord only forces through an electrical charge and does not force the controller and console to connect, it just works when your batteries are low, in the event that your console is faulty, you can purchase RF boards and replace them yourself (voids the warranty but takes 20 minutes) or send it into XBox HQ (gives you more warranty but takes like 6 months)
.

To connect the controller to a computer that is running Windows XP SP2 or a later version of Windows, follow these steps:

1. Press and hold the Xbox Guide button until the controller turns on. The Xbox Guide button is the round button with the green "X" near the center of the controller.
2. Make sure that the Xbox 360 Wireless Gaming Receiver for Windows is plugged in to your computer.
3. On the Xbox 360 Wireless Gaming Receiver for Windows, press and release the small round Connect button.
4. On the controller, press and release the Connect button. The Connect button is the small button on the front edge of the controller, between the left bumper button and the charging port.
5. The Ring of Light on the controller spins and flashes one time, and the light on the Xbox 360 Wireless Gaming Receiver for Windows flashes. When the controller is connected, the Ring of Light on the controller remains lit and indicates the position in which the controller is connected.

Note If you want help connecting an Xbox 360 Wireless Controller to your personal computer, you can contact Xbox Customer Support. For more information about how to contact Xbox Customer Support, please visit the Xbox Support (http://www.xbox.com/support/) Web site.