Question about Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

No picture, no sound on my Samsung 56" Projection TV

Lamp light just flashes on front of tv, rear lamp lights. Then tv shuts itself off. No picture, no sound.

Posted by on

  • hhart1219 Nov 29, 2008

    TV blanks out and no sound. After waiting awhile it comes back on. The most recent, could not turn TV off with remote nor on/off switch on TV. Had to disconnect power supply from wall outlet. Picture would not come back in for several hours. Still blanks out occasionally. TV is only 3 years old.



    H.Hart

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You probably need to replace the lamp. It's about $150, and if you buy it with the housing, it's a really easy fix, just unscrew and pull out the old one, and pop the new one in. Go here:

www.dlplampexpress.com

Posted on Nov 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tv on my samsung p4663w/hl does not turn on. lamp light flashes on front of tv picture does not work. no sound , bulb has no marks on it to show that it is bad


Tv projection lamp have a life span like any other bulbs light sources.Tipically life spans of these tvs projection lamps are around 20,000 hrs of useages.That average out like about 1 1/2 or 2 years and around 4 or 5 hours of the tv is on and watching it everyday.Now the front tv bazel frame of the tv.The word "LAMP" LED light indication is on or flashing are indication of the tv projection lamp life span are over and the tv must have it projection lamp to be replacement to another tv projection lamp.Projection Lamp fillerments tipically dies out when it reaches it life span.Mark or burns on the projection Lamp,will not show or be there,if the tv projection lamp run it natural life span cycles.

Aug 03, 2011 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Bought Samsung dlp h-l 5667w new in 2005. Replaced lamp, fan, and color wheel in 2008. Now lamp lights up and lamp indicator on front lights up, fans turn on, but tv picture will not show. After a few...


It time to replaced the tv projection lamp again,the tv projection lamp life span have ended.The tv projection lamp life span only last 2000 hrs.Average out like 1 1/2 or 2 years max for tv on watches 4 or 5 hrs of tv every days.

Jul 07, 2011 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

Hlp 5063w on off front button flashing lamp then stanby..hear sound no picture.. shuts off then comes on.


If the lamp and standby lights are both flashing and the timer light is off, check that the lamp cover on the back of the TV is properly positioned in the groove and secured by the screw. Take it off and check that the screws that hold the lamp itself are secure. There is an safety feature that keeps the lamp from turning on when the lamp cover is off.

If the three lights (timer, lamp, and standby) are blinking, then the lamp needs to be replaced. If the timer and standby lights are blinking and the lamp light is off, then a cooling fan isn't working. When only the standby light is blinking and the other lights are off, the unit is overheating and a ventilation area may be blocked.

I hope this helps.

Cindy Wells

Sep 30, 2010 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

HL-R5667W Picture just went blank, no sound. turn on tv the timer,lamp and stand by/temp light all flash. replaced lamp still same issue heard intermittent whirling fan rubbing sound before it went bad


Sounds that tv got color wheel problem that will be replaced.
If you are handy with electronics stuff repair then replace color wheel in light engine of tv to solve its issue.

Sep 13, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

The Tv will turn on and work for 5 min then shuts down


3 lights on front flashing indicates lamp quit. Could be lamp or ballast.

Apr 10, 2010 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

No picture on tv all three lights flashing on front of tv.


Three blinking LEDs mean lamp may be defective replace the lamp.

May 25, 2009 | Samsung HLR5667W 56" Rear Projection HDTV

1 Answer

No picture, new lamp


Did you reset the hours on the lamp with the menu options on your set? Sometimes, if you do not do that it can mess with the tv performance thinking that its over hours. It needs to be reset to 0 again...

Sep 24, 2007 | Samsung HLN4365W 43" Rear Projection...

1 Answer

Samsung HLP 5063WX Sound but no picture


Carloes, You need to open the lamp housing door and take the lamp tray assembly out to visually inspect the lamp itself... If the lamp is blown it will be obvious and replacing it should restore normal operation. A shop can do this on a single home visit. The second part of your question has to do with the unit cycling (turning on/off a couple of times) This is because the lamp detection circuit is finding no load on the lamp circuit. Light is not lighting - - - Tv shuts down. This is merely a protection from causing other damage or more damage. The circuit doesn't know why there is no load volatge just that there is none. Good Luck Bill

May 31, 2007 | Samsung HLP4663W 46" Rear Projection HDTV

Not finding what you are looking for?
Samsung HLR5667W 56" Rear Projection HDTV Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...