How do i change my NAT type to open? - Belkin F5D8236-4 Router

Login to the router UI.

This WEB site shows how to configure PlayStation NAT settings
http://manuals.playstation.net/document/en/ps3/current/settings/connecttest.html

You will need to change the firewall settings of your router. If your Internet service provider is DSL then make sure that modem is in bridge mode. How to change NAT type to open

There are several things you need to configure in order to change your NAT to open. Here's a link to help you out:
http://support.xbox.com/en-us/pages/xbox-live/troubleshoot/connection-issues/nat-type-strict.aspx
It has steps that can help resolve your issue.

You are trying to open the NAT on the router for X-box.
For this you will need to reduce the MTU settings on the router to 1365.
You will also need to trigger some ports on the router.
For this you will need to open the router set up page.
Router set up page is the page where you can change the settings of the router
Click Here to know more about router and network

try these step by step instructions i used.

http://www.xbox360forum.com/xbox-forum/threads/51908-How-To-Open-NAT.-xbox-360.

hope it helps

here you go...step by step instructions on how to change your NAT type to open:

http://www.xbox360forum.com/xbox-forum/threads/51908-How-To-Open-NAT.-xbox-360.

mine pops up when i type in www.router.login.net
give that a try.

and heres step by step instructions for changing the Nat type for xbox360 i used to change mine in case you need help.

http://www.xbox360forum.com/xbox-forum/threads/51908-How-To-Open-NAT.-xbox-360.

hope this helps

This router does not have the typical "strict or open" NAT types. Looking at the manual, it looks like what you want is NAT enabled and SUA only enabled.

http://www.zyxel.com/web/support_download_list.php?indexflag=20040906173729&ModelIndexflags=0,420041221102511,420041221102520,420050117110858,420050117110916,420050117110934,420050831093216,420050831095441,420060420160946,420060420161739,420060816160116,420080815092146,420090427144843

Page 133 has the details.

Log into router
go to the NAT tab
Enable NAT
Enable SUA only
Apply the change.

Can you check the Zyxel site for the latest firmware? Try NAT type 2 if an option.