Question about Epson EMP-740 Multimedia Projector

1 Answer

Dead Unit The projector was working fine. One day we tried to turn it on and it would not power up. I have checked the AC power on the cord of the projector. There is 115 VAC. We've tried the remote (changed the batteries 3 times) and the button on the projector. Nothing. (Epson EMP-740) Dennis Staley 765-246-6848

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The projector bulb was burned out.

Posted on Jul 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my Sony VPL S600 won't turn on at all. It seems like it's not getting any power. I turned it off and a few days later i went to turn it on and nothing, no lights or sound or anything.. What is the...


I know this sounds silly, but check the switch on the back of the projector. There is normally a hardware switch, somewhere around where the power goes into the projector. Make sure this is on. Second, try taking out the bulb, WITHOUT TOUCHING ANY GLASS, and replace it. There is often a safety switch that prevents it from powering up without a bulb. Also, try using a different power cord, or try using a different outlet. If it works with a different power cord, your cord was bad. If it works with a different outlet, your outlet will need to be inspected by a qualified electrician, to make sure there are no shorts or other hazards. If none of this works, contact Sony about getting the projector in for repairs. Please do not try to open the projector your self, there are a lot of capacitors that store energy for long periods of time.
Thank you! Jordan

Mar 01, 2011 | Sony VPL S600 LCD Projector

1 Answer

Sony vpl cs5 projector will not turn on now power what so ever... Fuse on main power board is fine and power is getting to the main board at the back of the projector (the board which runs the bulb) the...


Have you tried the following:

Connect the power cord and turn the projector to standby mode.

Press the following keys on the remote commander in the following order for

less than five seconds each: RESET, <,>, ENTER.

Feb 26, 2011 | Sony VPL CS5 Multimedia Projector

1 Answer

Where are the fuses in a Sharp xg-nv3xb notevision3 projector


Main line fuse is on the board where the ac cord plugs.
The caps in the power supply usually leak and explode after 5 years, blowing the fuse. Solution is to replace the power supply and lamp ballast boards. Expensive repair.

Nov 09, 2008 | Sharp Notevision PG-A10X Multimedia...

1 Answer

HP VP6210 won┬┤t turn on at all


try to replace all the capacitors on the motherboard. This are the only parts that leak in time. Try otherwise to reset to counter or update the firmware on your machine on the infocus site.
Goodluck !

Sep 04, 2008 | InFocus LP120 / 1000 Lumens / XGA / DLP...

1 Answer

Projector stopped working


Hi amp422

This wouldn't be a lamp issue at all if there is no power at all on the unit.

Take of the top cover and change the fuse located on the Powersupply Board ( the one where the AC socket goes into)

Should do the trick.

Thanks for using Fixya !

Apr 29, 2008 | InFocus LP530V Video Projector 2000 ANSI...

1 Answer

PT-LB20VU unit won't power on


check for the following:-.
1--the power cord may be disconnected.
2--main power switch is turned off.
3---no voltage(electricity)in wall outlet.
4-the lamp cover has not securely closed.
5--check for blown power fuse and change it with the same rate.
6--defective power supply unit.---.

Jan 21, 2008 | Panasonic PT-LB20NTU Multimedia Projector

1 Answer

Dell 2300MP - no power


It looks like you may have a loose contact somewhere around the AC input. Try pushing the AC cord or wiggle it gently, if power comes back on; you have a loose connection.

Jan 16, 2008 | Dell 2300MP Multimedia Projector

1 Answer

Dead


change power cord first and check- then check power fuse inside after you open it(you may need allen key to open it)-if all previous failed change powerpack.

Dec 17, 2007 | Compaq iPAQ MP1200 Multimedia Projector

2 Answers

Infocus LP70


its not geting power lust like mine

Dec 11, 2007 | InFocus LP70+ Multimedia Projector

1 Answer

Accidently hit the key lock button


Hi

You can overcome this problem by disconnecting the AC power cord, to turn off the power. Then press and HOLD the select button and reconnect the AC power cord.

This should clear the Lock.

Hope it helps

Dec 08, 2007 | Sanyo PLC XU50 Multimedia Projector

Not finding what you are looking for?
Epson EMP-740 Multimedia Projector Logo

Related Topics:

409 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Multimedia Projectors Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

The Knight
The Knight

Level 3 Expert

68250 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5625 Answers

Are you an Epson Multimedia Projector Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...