Question about Washing Machines

2 Answers

Whirlpool AWG 345/4 error code E 06 - Washing Machines

Posted by on

  • 1 more comment 
  • watcakes Nov 03, 2008

    me too dam thing - any advice?

  • l14muu Dec 02, 2008

    i have the same e06 problem i have cleaned out waste pipe and impeller
    any ideas

  • babko Dec 14, 2008

    whirlpool AWG 345/4 error code 13


2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

After you have done a manual drain of the water what is left in ie pipe and bucket, Disconnect pipe at waste and remove round cover plug from lower left corner of machine blow down pipe this gets all muck /blockages out ensure you put somthing at machine end to catch any thing that comes out. Also ensure pipe is free of any objects which may have moved down pipe ie buttons coins. I had 4 buttons jammed in. sorry about the names i have given to parts on machine as i am a vehicle tech. hope it helps

Posted on Dec 02, 2008

Whirlpool AWG 345/4 error code E 06,

My daughters machine keeps getting the above error code and she cant drain or spin machine, any surgestions please?

Posted on Aug 16, 2008

2 Suggested Answers

  • 6277 Answers

SOURCE: my washing machine is displaying

Hi from retired Englishman in SW France,

My notes for Whirpool models suggest that F14 is 'EEPROM failure (control unit)'.
Sorry- looks like a service call ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Posted on Jul 08, 2011

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Manual for whirlpool AWG 336 -1000

hi everybody
i would need a manual of AWG 336 washing dryer
if somebody has it please send me a link or the manual to
thanks a lot!!

Dec 29, 2012 | Whirlpool Washing Machines

1 Answer

My washing machine is displaying error code E 14, what is the solution?the model is whirlpool AWG 345/4.THANK YOU

Hi from retired Englishman in SW France,

My notes for Whirpool models suggest that F14 is 'EEPROM failure (control unit)'.
Sorry- looks like a service call ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C

Jul 08, 2011 | Whirlpool Washing Machines

1 Answer

My Kenmore Elite Calypso Model #110.24086200 SN #CR3808384 is not completing it's cycle and error code (06) shows up. What does code (06) mean?

Error codes start on page 46 and detailed instrustions to run diagnostics start on page 47.$FILE/8178010.pdf

Mar 20, 2011 | Kenmore Washing Machines

3 Answers

Need user manual for whirlpool AWG 5061/M --600RPM AA 5Kg

I NEED USER MANUAL BOOK FOR WHIRLPOOL FRONT LOAD W/ MACHINE MODELS NO AWG-5061/M AA 5KG 800 RPM please send it to me on I will be greatful to you Thanks

Nov 03, 2010 | Whirlpool AWG329 Front Load Washer/Dryer

1 Answer

I have an AWG 345/4 whitch displays fault code E14 can anyone help Thanks

To prevent the washer from operating while the detergent drawer is open your machine has what is called a "reed switch". The reed switch is controlled by this magnet, so that when the drawer is closed the magnet causes the reed switch to close and this tells the control board to go ahead and run the machine.

Your error message is telling you the reed switch it not working, so they want you to check the magnet to make sure it is still in place and is working.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Sep 07, 2010 | Whirlpool Washing Machines

1 Answer

Whirlpool intergrated washer dryer model awg 3454 error code e14

I have had a similar message form my machine and the only user action possible was to clean the pump.

It may be the same with your machine so follow your instructions for this.

Aug 05, 2010 | Whirlpool Washing Machines

1 Answer

Have Whirlpool awg 345/4 i have tried drying clothes dfollowing instructions bu will not heat up and dry clothes had on for 2 hrs on full cycle with 1200 spin

you dont say if this machine is new if it is contact the whirlpool web page and they will tell you how to do the programs but i must say 1200spin is not very fast for drying you need at least 1600 soin to do a good job.adrian,,,,,

Jun 29, 2010 | Washing Machines

1 Answer

10/3 or 12/3


AWG Ampacity from table 450-5b of the National Electric code states the maximum ampacity;

12 AWG = 20 Amps
10 AWG = 30 Amps
8 AWG - 80 Amps

According to this, an electrician would pull 10/3 (or 8/3) for a dryer service because 12/3 is not allowed (by LAW) for this application.

Hope this helped,

Apr 06, 2009 | Whirlpool ET8CHEXSQ Dryer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

1,749 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers


Level 3 Expert

71162 Answers

Brad Brown

Level 3 Expert

15212 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides