Question about Konica Minolta Office Equipment & Supplies

1 Answer

MFP Board for Konica-Minolta BizHub 252C

Anyone know a ballpark price for this controller board? We have a machine that is not yet a year old and we are being told that this board is bad. The price for the board we were quoted was $4,700.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Konica Minolta Master
  • 1,362 Answers

If it's under a year it's still under manufacturer warranty.
Call Konica-Minolta and talk to tech support. Even if you don't have the receipt they know where and when you bought the unit ( if you bought it at a recognized dealer). They should send you a return ground label to send back the unit and fix it free of charge. You will still need to give them a credit card (in case it is more damaged than you claim), but if it's in good condition they will honor the warranty.( I had one that was only a couple of weeks from expiring from the warranty and they told me they would send the label.)

In any case try this site

http://www.precisionroller.com/catalog_display.php?fm=0&step=3&MfrID=297&ModelID=7540&CategoryIDs%5B%5D=41

Posted on Jul 30, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Maytag MAH6500


yes there is a control board at the back of the machine if it got wet it will be damaged and eventually the machine not might work at all its easier to call a repair man instead of all the trouble doing it your self and it is int costly at all

Sep 09, 2008 | Maytag MAH6500 Neptune Front Loading...

1 Answer

I need need the original price & the year(s) manufactured


I am in the process of doing research on this information and will get back to you shortly.

Nov 30, 2013 | GE Spacemaker JVM1640SJ Microwave Oven

1 Answer

How much does it cost to fix the catalytic converted on a 2003 Hyundai Tiburon?


Don't ever use the word ballpark at a repair
shop or keep harping on prices or you may
& should be asked to leave
You can use your computer to look up parts prices
on hundreds of sites.
You don't replace any converter until you know you
have no engine cylinder misfires,proper fuel pressure,
fuel trim,no vacuum leaks,including exhaust,good or
new oxygen sensors
There is a reason why a converter fails
At 14 years of age ,sure, it's worn out, replace it.
Replace it your self

Jul 19, 2013 | 2003 Hyundai Tiburon

1 Answer

I have a Savin Model C2824, great shape. I want to downsize can someone tell me what fair market value is?


Without specifics all I can do is give you a ballpark. I would say around $1,500.00 would be a fair price. I base that on the fact that whom ever buys the machine will have no waranty. If the machine is under a transferable maintenance contract then maybe you could go a bit higher. I sell nothing but off lease used color and black&white copiers for a living and have done so for 27 years. If your machine had a fresh refurb done on it then the price would be higher. Anyone who is looking at buying a used color copier/printer is going to be concerned with possibly having to replace expensive parts like imaging units, fusing units etc. Also if your machine has the fax option this will help the selling price. This is a good machine and as long as the meter counts are not to high the the price point I have given you should be pretty close.
Good Luck and Thank You for using Fixya.
WheatlandServices

Nov 16, 2010 | Savin Office Equipment & Supplies

2 Answers

States F1 everytime going to wash


Call Whirlpool Customer Service at 800-253-1301
tell them you have a F1 code appearing repeatedly,and that you are aware of a "rework" issue regarding the control board, and that you want a service call to be set-up, This is a VERY common problem with this machine, along with the F-51 code which is a bad RPS. The control board will need to be replaced.
www.appliancehelponline.com

Mar 24, 2010 | Whirlpool Cabrio WTW6600SBT Top Load...

2 Answers

Electrolux EWF 1087 - Power on, light goes orange, nothing works.


Hold reset and start buttons down, while turning on. Hold down for about 10 seconds.
If you're getting an E90 error code, which means communications error, it means you have a dodgy connection between the main board and the control panel.
Disconnect the power completely, open up the top of the machine and reseat the plugs on both ends on the blue ribbon cable connecting the front panel display to the main board. (The main board is the big white plastic thing with all the wires running into it).
Do the reset steps when turning on again, should be good to go, otherwise it's a bit more serious and you'll need the tech back.

Feb 28, 2009 | Washing Machines

1 Answer

F02 error. They came out replaced pump, didn't work.


Your filter on your pump is probably clogged with lint and stuff. You have to remove the bottom front panel, 3 screws. The panel will drop and come off. The filter cover is right in front. Keep ready a bunch of towels and unscrew the filter cover and twist the filter out. Clean out all the stuff and put it back in. No control board nothing.

Jan 25, 2009 | Whirlpool GHW9300 Duet Washer

1 Answer

When i push start on the oven nothing happens but the timer is wo


bad relay on control board . not worth it cost to high ( ge board 145.00 to 230.00 ) and with the oven @12 years old i dont think you would find it at price SORRY . please rate this answer , i need the rate to get my "wings' thanks

Jan 16, 2009 | GE Advantium SCA1001SS Convection /...

1 Answer

Does this make sense?


Hey graceylou,

Unfortunately, the estimate provided by the repair technician may be correct. While screens can generally be replaced, they often prove to be one the most expensive components of any LCD or plasma TV.

If you are in doubt of the prices quoted to you however, I would strongly suggest contacting LG directly for more information. Many manufacturers are able to provide ballpark figures for replacement parts, especially those that are the most prone to damage or susceptible to hardware failure. Remember that labor charges may not be included in any estimate provided to you by LG, so you may wish to confirm with your repair tech if these charges were included in the $1,200.00 you were initially quoted.

Hope this helps you out.

Sincerely,
Aaron
Go Ahead. Use Us.

Jul 24, 2008 | LG 42PX5D 42 in. Plasma HDTV

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6674 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...