Question about Washing Machines

3 Answers

Zanussi washing machine Jetsystem 1000 model FJ1093 - stuck timer?

Hi. The timer knob is supposed to go round through the wash cycle but it doesn't. Can you help. I'm in the UK.
Adrian

Posted by on

  • awp3 Jul 30, 2008

    Zanussi washing machine Jetsystem 1000 model FJ1093OK, I'll order the part but could do with a circuit diag as there are a lot of cables! I was hoping that it might be a loose cable...?
    Adrian

    Thanks for your speedy response!!



  • Anonymous Mar 13, 2014

    Can't turn the progamming/timer knob - occasionally been stiff before, but never stuck.

×

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 382 Answers

Hello,
The Timer needs to be Replaced,Which can quite easily done..If you plan to do it by calling Service person he might get you the Timer KNOB or else if you plan to do it by yourself Then you can order the Part from this link CLICK HERE


Thank you!!!...Regards...!!..

Posted on Jul 30, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 260 Answers

You are going to need to replace the timer assembly. This will require internal repair. You will need to order the part, but the assembly is pretty straightforward. Get back with us and we can help walk you through the installation when the timer assembly comes in.

CH

Posted on Jul 30, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Washing Mach... Master
  • 19,396 Answers

The timer is faulty you need to replace it .

Posted on Jul 30, 2008

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The knob just spins round and doesn't catch. It received a bash and it now won't accept a wash cycle. Any thoughts?


It seems that the timer has failed and needs a replacement. If this seems to turn around without clicking and if there is no action when the program cycle is initiated, this seems a failure of the timer controller unit. This happens in cases when it is turned around in reverse order or violently.

Jan 14, 2013 | Zanussi Washing Machines

1 Answer

Zanussi zwf1421


Thermostat or heater most likely causes. Does timer button move round without doing anything? Timer knobs on Zanussi notorious for breaking off inside.

Apr 28, 2012 | Zanussi F1245W Front Load Washer

1 Answer

The temperature knob on our ZWF14170W washing machine is stuck on 90C. My wife only turned it round to clean the knob and now it is stuck fast. I have tried to turn it back but am afraid of breaking it off...


There is a clip on your timer know in behind the knob itself. You got it miss align when your put it back and there is nothing there to hold in place.

Dec 05, 2009 | Zanussi Washing Machines

1 Answer

Zanussi jetsystem 1000 will not do anything


zanussi jetsystem 1000 has stopped spinning the wash ! its missing out the spinning program help ?

Oct 09, 2009 | Zanussi FJS1225W Front Load Washer

1 Answer

How to clean a Zanussi Jetsystem 1400


on my mums zanussi,, after opening door, machine had not drained and spined, closed door again could not get machine to go,, this time could not get door opened..there is power to machine.

May 19, 2009 | Zanussi Washing Machines

1 Answer

Washing machine isn't moving beyond first setting


your machine is waiting at the thermostop position on the timer till its hot enough as per thermostat/timer temp setting,its probably faulty element or faulty stat ,id check the element first,it should have approx 20 to 35 ohms depending on wattage of machine,check element connections and heavy connection wires at timer for any burnt connections-hope this helps

May 14, 2009 | Hotpoint Aquarius WMA42 Front Load Washer

1 Answer

Heating element


hi yes they are different the fc1200w element is 1600 watts (£31 part 150867200-1)the jetsystem zwf1658 1900 watts its always better to use the correct part.

May 03, 2008 | Zanussi FC1200W Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...