Question about Philips Dynamic Edge 4.1 PSC604 Sound Card
I was trying to get in-game chat to work but my microphone is not being recognized. after following all tech instructions and seeing if drivers needed to be updated (they were fine), i am still having no luck. the microphone plugs into the back (non-usb type) and requires no software. any ideas are much appreciated!
Tips for a great answer:
Jun 30, 2014 | Focusrite SCARLETT-2i2 2 in / 2 out USB...
have you tried this control panel sounds and
audio,volume,advanced,speakers select the appropriate speakers from the drop
down list or navigate to the device manager scroll to system devices + to
expand,system speaker right click properties then select use this device
(enable) also you might check
the speakers plug/outlet is usually at the back of the computer you will have to open up the computer to check the lead attached to the rear of the input plug make sure the connection is good
try cleaning your computer of dust using a fine air blower from a compressor making VERY sure that there is no MOISTURE in the air line specifically around the sound card and the CPU central processing unit dust causes static to build up in a computer
click start control panel sounds and audio devices select advanced there might be a tick in the mute box untick it or select audio from the microphone drop down list make sure you have the right one selected and in the volume box make sure the microphone box has a tick in it or select the voice tab and make sure that you have the right media selected also select volume make sure the box for microphone has a tick in it
hope this helps
Apr 23, 2011 | Compaq Audio card Sound Card
Jan 28, 2011 | Audio Cards
Jan 19, 2011 | HP (400745-001) Sound Card
Mar 07, 2010 | Creative Labs SoundBlaster X-Fi Fatal1ty...
Mar 03, 2010 | Acer Audio Cards
Apr 11, 2009 | Audio Cards
May 09, 2008 | Audio Cards
Jan 13, 2008 | Creative Labs Sound Blaster Audigy LS...
Mar 14, 2009 | Philips Dynamic Edge 4.1 PSC604 Sound Card
130 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: