Question about E-Machines eMachines Desktop PC

1 Answer

Moniter My moniter will not stay on and when I turn the computer back on, it says AVG and has the picture of the AVG cord. I assumed that the AVG cord had a short in it or something but when I bought a new one, it still did not work.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 202 Answers

First please check whether the Monitor powering ON or not
the see the colour of light of the monitor i.e, its green or orange or not glowing next see that all the lights showing but constantly flickering or else just see u r VGA or DVI Cable which is connected properly to the CPU if it is ok then remove the cable connect only the monitor to different machine in case still not comming then finally it is a monitor problem or else just check all the connections inside the CPU

In case its monitor problem either it will not power ON or else all the lights will blink constantly that means the refresh rate or the Resolution of the monitor has been changed in case if it is done just connect a different monitor boot in the safe mode by pressing F8 button after entering there change the resolution which will be in the display properties apply and reboot the machine or else turn off u r PC and connect u r Old Monitor and Boot the Machine

Posted on Jul 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Displaying only 2 secs


Monitor STFC (Self Test Feature Check)
* Turn off the monitor
* Plug the monitor power cord directly into the wall socket to remove any surge protectors or APCs from the troubleshooting equation
* Unplug the monitor video cable from the back of the computer
* Turn on the monitor
* The floating dialog box should appear on screen against a black background. If the issue appears during the STFC, the monitor is defective. Get it replaced.

Oct 31, 2013 | BenQ Computers & Internet

1 Answer

Lg Flatron 17" monitor turns on you see the green light then


it's prb.. your video card not the moniter if a moniter goes from green to yellow " standby" it's prb the computer not the moniter

Dec 27, 2009 | LG Flatron L1715S 17" LCD Monitor

1 Answer

I have an Acer AL2017 Moniter. Upon turning on the tower the moniter turns on briefly makes this watery sound shuts down and continues this for sometime eventually until no picture shows at all.If I play...


Had the same problem took it apart and found 5 capacitors on the power/inverter board swelled i replaced those with new ones then it worked perfect.. there were 2 1000uf 25v and 3 330uf 25v swelled.

Nov 26, 2009 | Acer AL2017 20" LCD Monitor

1 Answer

Moniter says no signal


You may need to replace the moniter cord or check the video card on the computer.

May 31, 2009 | Acer Aspire™ T180 PC Desktop

1 Answer

Scanport N7 LCD Monitor won't stay on


it seems a whole lot of people have moniters with fatal ailments as i do as well. after spending $ 150.00 at computor stores & still had the same problem with my Moniter I just orderd another new moniter & the Problem is fixed..

I Think there killing moniters on purpose

Jan 15, 2009 | Scanport 17" LCD Monitor

1 Answer

I NEED HELP PLEASE!!!!!!! PROVIEW 19" MONITER.


Does the led on front of the monitor stay blue or does it become amber ?
If it becomes amber, then you are not getting a signal.
No harm in trying this : You can try to see if it is a contact problem.
With the monitor unplugged.
Use a small paper clip to run in and out of the blue vga plug holes a few times each to make sure they are not plugged or gummed up.
If that doesn't help and you know that your video cord is good, then I am afraid to say that more than likely there is a problem with yor video card.

If it stays blue then the signal is there but the screen isn't fully lighting up, leading to a failing power-inverter board or a bad bulb.

powerseller
bammbammfran

Oct 12, 2008 | Proview PL926WBi 19" LCD Monitor

2 Answers

Problem with data cord


Change the data cord if not repaired then change the monitor ,give another companies monitor

Aug 26, 2008 | Philips 105S51 15" CRT Monitor

2 Answers

Moniter


Check the inverter board.

Sep 10, 2007 | BenQ T701 TFT 17" LCD Monitor

1 Answer

Using your television as a moniter for your computer


check www.repairworld ,dalbani.com parstore.com they might have what you are looking for

Jun 11, 2007 | Samsung DVD/VHS/MP3/SVHS Playback

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...