Question about Panasonic Televison & Video

1 Answer

I have a Panasonic LCD TX-26LXD60 bought in 2006. Initially occasionally, now almost always, the right half of the screen appears more (or less) lighter than the other half. Moving the TV around its socket or slightly tapping the back or the site of the screen, might improve - or worsen - the problem. I imagine that this might be due to a faulty connection. Can you help? Many thanks. Kim Efa. kimefa@gmail.com.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 167 Answers

Hello . it sound like you have some lose connection's in side the set .!!!! they are most wire connection.!!! but they could be ribbon connection's.!!! that are lose in side.!!! or it could be a clod sodler jont.!!! or they call it a dry socket.!!! it's wear the set has got so hot .!!! that the solder pull's away from it's connection.!!! and by tapping on it my the connection . conect again.!!! but not for long.!!! hope this help's you. "GOOD LUCK"

Posted on Jul 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Samsung TV Screen faulty


t con board failed if its half and half. can also be a lose cable on the screen to the tcon board from the lcd screen side. Tcon is in the middle off the screen on the back.

Nov 18, 2012 | Samsung LE46M51B 46 in. LCD Television

1 Answer

The tv i own: Panasonic TX-32LX77 LCD Monitor (TX32LX77) . i want to know if this is HD. if i hook up the tatasky HD box, will i get a full HD output? thnx


The TX-32LX77 is an HD TV but only has 720p (1366 x 768) resolution. Full HD is 1080p. (SD is 480i.)

I wish that I had better news.

Cindy Wells
(It's possible that you won't notice the resolution difference; small screens don't always need the full 1080 lines of pixels from top to bottom of the screen to give a crisp picture.)

May 23, 2011 | Panasonic Viera TX-32LX77 LCD TV

1 Answer

How do I change the Baud rate on a canon f80 fax


To set the receive speed
Change RX Start Speed Setting The message [START AGAIN] will appear if phone line conditions are less than perfect. Decrease the transmission (RX or send) speed if this message appears frequently on the LCD.
  1. On the operator panel, press <Menu>.

  2. Press the left '<' or right '>' arrow repeatedly until [USER DATA] appears.

  3. Press [Set].

  4. Press the right arrow repeatedly until [FAX SETTINGS] appears.

  5. Press [Set].

  6. Press the right arrow repeatedly until [RX SETTINGS] appears.

  7. Press [Set].

  8. Press the right arrow repeatedly until [RX START SPEED] appears.

  9. Press [Set].

    1. The factory default RX (send) Speed is 33600 bps.
    2. You can select from the following RX Speeds:
      14400 bps
      9600 bps
      7200 bps
      4800 bps
      2400 bps

  10. Press the right arrow to display the applicable RX Speed.

  11. Press <Set>.

  12. Press <Stop> to return to standby mode.
To Set the Send Speed

Change TX Start Speed Setting The message [START AGAIN] will appear if phone line conditions are less than perfect. Decrease the transmission (TX or send) speed if this message appears frequently on the LCD.
  1. On the operator panel, press <Menu>.

  2. Press the left '<' or right '>' arrow repeatedly until [USER DATA] appears.

  3. Press [Set].

  4. Press the right arrow repeatedly until [FAX SETTINGS] appears.

  5. Press [Set].

  6. Press the right arrow repeatedly until [TX SETTINGS] appears.

  7. Press [Set].

  8. Press the right arrow repeatedly until [TX START SPEED] appears.

  9. Press [Set].

    1. The factory default TX (send) Speed is 33600 bps.
    2. You can select from the following TX Speeds:
      14400 bps
      9600 bps
      7200 bps
      4800 bps
      2400 bps

  10. Press the right arrow to display the applicable TX Speed.
You can download a copy of the user manual for the F80 at
http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=DownloadDetailTabAct&fcategoryid=334&modelid=7175

Please make sure to rate this solution. Thanks.
  1. Press <Set>.

  2. Press <Stop> to return to standby mode.

Apr 29, 2010 | Canon MultiPASS F80 All-In-One InkJet...

1 Answer

Cannot get ITV or Channel 4 on newly aquired DTV, why is that?


The only thing I can think is happening is for some reason it's ignoring these stations. I suggest you try going to the factory settings for it. Then retune, it might clear the tunner's memory.

Feb 26, 2010 | Televison & Video

1 Answer

Hi I have a Panasonic LCD TX-32LXD there appears to be a line across the screen. It is about 1" 1/2 wide. but is completely see through and depending on what colours are on the screen depends how bad it...


Hi There,
Try restore the tv to factory state. It could be a burn in from a tv station you always watch eg. Some lcd will have a non burn in function, What that means simply is if you watch mtv all the time it will leave the mtv sign in the corner as its burned into the tv. Depends on how old the tv is restore and see what happens from there, other than that get an engineer or replace it if its still under warrenty....Hope this helps

Nov 17, 2009 | Panasonic TX-32LXD1 32 in. LCD Television

1 Answer

Half screen on Palm Tungsten e


its a loose wire OR your screen is damaged
it might be a loose wire on account of it working fine sometimes but
it could be a damaged screen because only half of it works

Apr 28, 2008 | Palm Tungsten E Handheld

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

4767 Answers

The Knight
The Knight

Level 3 Expert

71736 Answers

Jaime Hernandez

Level 3 Expert

2294 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...