Question about Brother MFC-7820N All-In-One Laser Printer

2 Answers

Fax machine stoped receiveing fax - Brother MFC-7820N All-In-One Laser Printer

Posted by on

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 117 Answers

First, check your fax's phone line. Put a regular phone on it and check for dial tone and line noise. If the line is dead or noisy, this will cause a problem. 
You can also try dialing your fax number from another phone and see if the fax unit picks up the line and starts initiating communication. (sounds like modem noises)

Posted on May 06, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Hello Sir,
i checked all is ok, fax machin showing in display-raceving fax-
after that come error,.....................and showing raceving failed.

and same problem fax sending also showing -sending page1...and later showing fax sending failed.

  1. raceving fax always problem, but sending some time secsessfull,

Posted on May 09, 2009

2 Suggested Answers

  • 105 Answers

SOURCE: unable to print

OK ill help you A faxmachine has a buffer on it what it does is fasimilate the data into a text or message that can be printed what happens here is you have fax/printer the buffer for the printer should be on your computer and not be sent until your ready to print (also known as the print que) all print jobs should be saved when a fax comes in but when a fax comes in and you dont have print que software your printjob is lost. But this brand is familiar to me so the software you install for this hardware should have a print que or buffer so you dont have this problem maybe you need the new BROTHER MFC software at the following link http://www.pronto.com/user/search.do?displayQuery=brother%20mfc%2Fsoftware&SEM=true&query=brother%20mfc%2Fsoftware&adid=1196541613-6635448d-0_mes&ref=brother%20mfc%20software&creativeid={creative}&site={placement}&loadingComplete=true

Posted on Oct 19, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to see a record of the transmitted FAXs. How can i get this information?


This website has no way to provide or look up this type of information.

Jan 14, 2017 | The Office Equipment & Supplies

1 Answer

We have a fellowes shredder. It got full and jammed. After cleaning and emptying it will not turn on. Is there a reset button? Thanks. Betn


We've found that when the container is overfilled with shredded paper, it will begin pulling shredded paper back into the cutters and jamming the machine. Sometimes reversing the machine will spit the paper back up, but if it is thoroughly jammed, only way to unjam it is to UNPLUG it first, then manually remove the paper from the cutters. Then, be sure to dump the container BEFORE it is filled with paper.

...

Jan 12, 2017 | Fellowes Office Equipment & Supplies

1 Answer

HOW DO I un-lock the scanner on a Brother MFC 7420?


Unfortunately, the MFC-7420 doesn't have a physical lock switch. You need to turn off the all-in-one and wait for the unit to clear its memory. If the error recurs after you press the power button again, wait 30 minutes and try again. (Note: you will lose any faxes that are in memory. See the User Guide page 11-5 to save this information.) You can find the manual on the Brother support page for the MFC-7420: https://www.brother-usa.com/support/ModelInfo.aspx?R3ModelID=MFC7420 . Click on the Manuals & Documents tab. Then click on the Manuals on our Online Solution Center for the English version of the manual. The direct link to the User Guide is currently: http://download.brother.com/welcome/doc000387/ALLFB_UsaEngUsr_B.pdf .

You can also try unplugging the all-in-one for several minutes to reset the error codes. If the error persists, contact Brother if the MFC-7420 is still under warranty (1 year). If it isn't under warranty, consider replacing the unit. The repair costs may be unreasonable.

I hope this helps.

Cindy Wells

Jan 09, 2017 | Brother MFC-7420 Printer

1 Answer

Prinnter not printing but showing 'put custom in manual tray'


There is still a print job in the queue. Place a sheet so it prints or kill the job.


Open Printers and Faxes. Open printer. Highlight jobs and Right click > Cancel, or Documents > Cancel.
For those stubborn jobs, Right click My Computer > Manage. Choose Services and Applications > Services > Print Spooler. Right click and stop. Then start. This may have to be done from the Print Server if it's network printer. Contact IT to kill.

Nov 09, 2012 | Office Equipment & Supplies

1 Answer

I don't know to to program my avery berkel ix 202 help


This is your machine here.

https://www.cashregisterstore.com/pdf/IX-100-202.pdf

It has the contact details for Avery Berkel. Ask them to send you a PDF copy of the instruction manual or ask their service desk how to program.

They provide one here

http://www.averyberkel.com/media/IX_User_76103-831-05.pdf

Or you can download this one, also free

http://www.armaghpos.com/images/stories/Avery_Scale_Manuals/avery_berkel_ix100_scale_label_printer_om.pdf

Or buy one here.

https://the-checkout-tech.com/manuals/scales/Avery_Berkel_IX-110_and_IX-202_and_IX-212_user_guide_manual.html



avery berkel ix 202 Google Search

Mar 10, 2012 | Office Equipment & Supplies

1 Answer

"Error sent to printer" problem with ZDesigner TLP 2844


have you gone to printers in control panel and made this printer with a tick in it so its the one the computer recognises

Dec 24, 2011 | Office Equipment & Supplies

1 Answer

My fax wont work in my ricoh aficio 1515 mf??


Using the 1515 as a fax machine is a pretty simple procedure if everything works right. All you have to do is hook a working phone line up to the phone jack on the back of the copier (the one labeled LINE, not TEL).

Why won't the fax work? If it is giving you an error message, what is the message?

If you are not getting a dial tone when faxing, unplug the fax from the phone line and plug a working phone in, and see if the phone gets a dial tone. If it doesn't, there is a problem with your phone line.

You can also try plugging the fax machine into another phone line. If the fax works on that line, then there may be a problem with the first line.

Are you having problems sending faxes or receiving them, or both?

Jan 05, 2010 | Office Equipment & Supplies

2 Answers

We have forgotten the Administration password for our EStudio 350 & 450. Is there any way of resetting? Thanks Ben


restart machine ,then press the 0 & 8 keys,enter 263, then press Start. You should see admin password on the screen.

May 05, 2009 | Toshiba Estudio 200L Copier

Not finding what you are looking for?
Brother MFC-7820N All-In-One Laser Printer Logo

301 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Soulvisitor
Soulvisitor

Level 3 Expert

1113 Answers

Ron Dufek
Ron Dufek

Level 3 Expert

398 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...