Question about Samsung SCH-u740 Cellular Phone

1 Answer

Buttons When I hit the 2 button I get a 2/3 also 5/6 and 8/9? Seems as if they are connected?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,752 Answers

You will need to take the phone and have the keyboard service to correct this issue

Posted on Sep 20, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp Advanced D.A.L. seems locked, display shows a P in upper right corner by 0.


Your calculator is set to do arithmetics in base 5 (PENTAL), that is why the numbers are displayed with a small p. The only number keys that work are 0,1,2,3,and 4. Number 5 is represented as 10p and 6 is 5 (10)+1=11p.
To revert to the decimal numeration, press the [2ndF ] key followed by [+].

Jan 10, 2012 | Office Equipment & Supplies

1 Answer

Touch buttons on x box 360 not working


If buttons of your controller is not working we need to check the ff: Wireless controller: 1. Check the wireless adapter if properly connected. 2. Reseat the wireless adapter. 3. Check if you are getting stable green lights in front of the xbox for connection notification. TIP: It will be better if your wireless adapter is the wireless-N adapter. 4. You can check other wireless device to connect to xbox to isolate adapter issues. 5. If adapter is failing, replacement is needed. Wired controller: 1. Controller needs to be checked. 2. Controller needs to be tried to a friends xbox. If working,port might be faulty. 3. If controller seems not to work with a different xbox.controller needs to be replaced. Thanks for choosing www.fixya.com

Dec 05, 2011 | Microsoft Video Game Consoles & Games

3 Answers

I can't figure out how to change from right hand click to left hand. Please tell me how to do it. thanks


start run control panel mouse/ buttons/ configuration
press ok............
cheers

Mar 27, 2011 | Computers & Internet

1 Answer

Hit some buttons, now i can get 7 channel output.


Get into System Setup and run through the Speaker Configuration routine. My bet is it thinks you don't have Surround Back speakers.

Apr 24, 2010 | Denon AVR 3808Ci Receiver

1 Answer

Doesn't cycle to open soap dispenser


RUN THE TEST PROGRAM TO DO THIS YOU WILL HAVE TO USE BOTH HANDS. Press and hold "Scrub Wash" &
"Delicate/Economy" buttons TOGETHER WHILE HOLDING THE 2 BUTTONS IN HIT THE POWER BUTTON RELEASE THE 2 BUTTONS AND HIT THE 2 BUTTONS AGAIN YOU SHOULD GET A 21 0R 23 CODE AND THE TEST PROGRAM WILL RUN IT WILL TAKE 45 MIN TO RUN BIT WHEN DONE IT WILL SHOW A CODE 1 OR 0 MEANS NOTHING BUT IF YOU GET A NY OTHER # OR LETTER IT CORRESPONDS TO A FAULT
2 = Heating fault 8 = NTC (temperature sensor) fault
1 = Aqua Sensor ("Sensotronic") fault 4 = Filling fault F = Filling fault (display occurs during wash, not test)
DON
262-893-4840

May 02, 2009 | Bosch 24 in. SHU66C05 Stainless Steel...

3 Answers

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one of the following 2 methods should reset it to a normal state. This reset generally requires both hands and it is sometimes easier with another person.

If the serial number begins with an A and/or your power button on the far right (5th button from left):
Method #1
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 3 down at the same time (see picture above) and while continuing to hold the buttons, plug the power cable back in.
4. Keep holding the buttons for 5 seconds after the power has been plugged in and then let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.
Method #2
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 3 down at the same time (see picture above) and while continuing to hold the buttons, plug the power cable back in.
4. Keep holding the buttons until the 4th green LED blink; then, let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.


If the serial number begins with a B and/or your power button is in the middle (3rd button from left):
Method #1
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 4 down at the same time (see attached picture) and while continuing to hold the buttons, plug the power cable back in.4. Keep holding the buttons for 5 seconds after the power has been plugged in and then let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.

Method #2
1. Unplug the VGA cable.
2. Remove the power cable from the back of the monitor.
3. Counting the buttons on the front of the panel from left to right as 1 – 5, hold the buttons 2 and 4 down at the same time (see picture above) and while continuing to hold the buttons, plug the power cable back in.
4. Keep holding the buttons until the 4th green LED blink; then, let go. The green light should be steady when you release the buttons.
5. If the procedure worked, the green light will go to amber and you should see a "No Signal" message on the screen for a few seconds.

If you have tried the reset a few times and it does not solve your issue, please Ask a Question to submit a request through the system or call 1-866-752-6271 Option 1 to contact technical support.

Mar 02, 2009 | Planar PL1910M (Black) 19 in. Flat Panel...

2 Answers

Wont turn on after 2 buttons


try to connect it to the computer and reboot it

Sep 10, 2008 | Texas Instruments TI-84 Plus Calculator

1 Answer

Rca dvd\vcr locked on hello


The hello issue is most likely a faulty DVD-RW. These go out on thse models more than usual. Reset is a combination of 2 buttons. Press and hold the play and disk tray open or the power and play ( i forgot the exact sequence but you get my drift, press 2 buttons for about 10 seconds). You can also update the firmware...or atleast could before from RCA.COM but they no longer support this midel. I do have the software update on CD but it won't do any good on Hello issue. If worst comes to worst, open the player up and replace the DVD-RW drive.

May 25, 2008 | RCA DRC8060N DVD Recorder

Not finding what you are looking for?
Samsung SCH-u740 Cellular Phone Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Cell Phones Experts

Fotis Papastamatiou

Level 2 Expert

96 Answers

Bill Long

Level 3 Expert

587 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Are you a Samsung Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...