Question about Navman GPS Devices

1 Answer

Navman N20 2 years old. Keeps flashing "Demo" i red on top right corner of screen over ETS etc. Also voice over comes and goes, keeps quiet when doing many turns and then goes crazy saying. Keep to left over and over, or destination over and over. have to switch it off and start over. I have no idea what is wrong, but it also seems to have lost its sense of direction somewhat. Tried to take us to Oxford from Bedfordshire when we were going to Gateshead..... Any ideas please. Thank you

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 64 Answers

  • You should be able to switch demo mode off by pressing the preferences button (the one with four small circles printed on it), then select Route Options, then tap the right arrow button until you get to page 4 which is the Demonstration and Logging screen. Then untick the SmartST shop demonstration box.
    If that doesn’t work you could try doing a factory reset.

Posted on Aug 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I had to buy a new in car charger for my navman s30,but when i plug it in to the sat nav & cigerette socket it keeps showing a computer,usb & navman picture.


  • Turn the Navman off by holding the power button in the upper left corner of the device until the screen goes blank.
  • Plug the unit into its charger using the USB port on the bottom of the unit. The battery indicator light next to the power switch should turn orange, indicating that the device is charging. Once the light has turned green the charge is complete. If the light does not turn on, verify that the car charger is plugged into a working outlet.

Jun 19, 2012 | GPS Devices

1 Answer

Unit is one year old. Worked fine this morning, got back into car and GPS asking set-up questions but a the time prompt it flashes off and starts the set up over againi with language prompt. Keeps...


try this originally posted by gt3rs i just did it and it worked for me Here is a solution that worked in my case (constant reboots after voice select)
  1. Plug your tomtom into your PC.
  2. Run TomTom Home
  3. Select the option to run your TomTom through your PC (TT Home)
  4. You should be greated with the select language screen
  5. Then simply select language etc.
  6. When you get to the voice selection: select a voice (here TTHome should freeze) <- also strangely enough notice the cancel button doesn't on the screen (as it does when doing this on the device)
  7. Don't panic TT Home should start working again in a few seconds
  8. Disconnect your TomTom and that should have solved the problem, the normal map screen should show up upon starting up your TomTom
This solved the issue for me, hope it does for you good luck!

May 10, 2011 | Tomtom One XL GPS Receiver

1 Answer

Navman my65t Makes connection OK but no sound coming through navman. Once connection is made cannot hear or speak to person on the phone. Using iPhone 3GS and is paired with Navman. Tried it inside...


I have a Navman MY65T (a month old) it no longer has audio voice prompt, it used to speak out the directions. have I turned off a setting how do I regain voice prompt for directions????

Feb 09, 2011 | GPS Devices

1 Answer

How do i romove the demo from my mio m420 it keeps coming on mid way through another route


Hi,
On the main menu, go to My Mio, then scroll all the way to the bottom and disable shop demo

Dec 31, 2010 | Navman Mio M400 Car GPS Receiver

1 Answer

My navman f35 keeps going into demonstration mode while traveling to a chosen set destination ..about every 10 minutes i have to keep resetting it which is impossible when i am driving it is dangerous


The problem is that from the settings, the demo mode is set as a kind of screen saver option, you need to go to the menu, settings and turn it off. It is indeed very dangerous trying to set your gps while driving so You need to park your car somewhere safe, then you go to the menu and turn off the demo mode, after turning it off, it will stop showing the demo mode.
Hope this piece of information was helpful

Dec 21, 2010 | GPS Devices

1 Answer

Pin570 using garmin Mobile XT software,GPS not working


Try Start Settings System GPS and tap ON before starting the satnav program. Not all programs automatically switch on the GPS. On hitting ON yellow light top left starts flashing. Now start your satnav program..

Aug 08, 2009 | Navman PiN 570 GPS Receiver

2 Answers

Red light blinking on right side on top and white screen and sometimes there is annoying sound


if the battery is very flat, the red light blinks.
try sliding the little battery switch off for a few seconds, then on again, and have the charger connected

Aug 22, 2008 | Navman PiN 570 GPS Receiver

2 Answers

Navman S50 Sreies


ok..so..do a firmware reset, and you should be good to go

Mar 22, 2008 | GPS Devices

Not finding what you are looking for?
GPS Devices Logo

Related Topics:

178 people viewed this question

Ask a Question

Usually answered in minutes!

Top Navman GPS Devices Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

The Knight
The Knight

Level 3 Expert

68157 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Are you a Navman GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...