Question about RCA 25110RE3 Phone

3 Answers

Headset does not work

Hi there! The headset has never worked. I put it on the charger and the red lights blinks all the time. Maybe the battery is not charging and I should get a new one? I tried to get a battery but it seems an impossible mission

Posted by on

  • MarceloM Jul 31, 2008

    Hi there
    Thanks for that. I tried it before but didn't work. I still think is the battery


  • rmgfieo Oct 22, 2008

    I cannot find the replacement battery for the headset. I have been on the internet for hours. RCA informed me that the replacement battery #5-2682 has been replaced by battery #5-2707. However, RCA cannot get either battery for me. Does anyone know where to get this battery?

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

You can get them at www.budgetbatteries.com they are $14.99 Guaranteed to meet or exceed original with a 1 year warranty.

Posted on Jan 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You can get the battery at radioshack.com $17.99 plus S & H for a total of $25.12.

Posted on Jan 04, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Disconnect the all lines and power
Remove battery of the headset
Put battery back in
Connect phone line
Connect power cord
Try this

Posted on Jul 30, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have plantronics t10, i have been able to use it in the past, but tried to plug it in today and the base red light (on/off) lights up red, but no dial tone. none of the buttons work.


It might be that you have a cord plugged into the headset jack. Try looking at that, if that is not it, it may be the cords are not plugged into the correct spot. I am sending you the Plantronics user guide for the T10 headset.

Good luck from Headsets Direct!

Jul 18, 2011 | Plantronics T10 Corded Phone (0031-t10)

1 Answer

I put my HFBLU-LT200 bluetooth headset on charger and both blue and red light have turned on permanently. Bluetooth has stopped working


That usually means it isin pairing mode. Charging some headsets from extended periods can sometimes reset the device requiring you to pair the device again.

Feb 04, 2010 | Cellular Innovations HFBLU-AX1 Bluetooth...

1 Answer

Headset compatability


NOTE: Before re-subscribing the system make sure the IntelliStand switch (on the right side of the charging base) is in the "_" position and NOT the "=" position.

To Re-Subscribe:

The headset and the base unit are supplied subscribed to each other. However, if you wish to use a replacement headset with the base unit (or if you lose your connection to the base unit), then you must re-subscribe as follows:

1. Return the headset to the charging base.

2. Press and hold both the + and - buttons on the back of the charging base until the red light on the front of the base starts to flash.

3. Let go of both buttons. The red light should continue to flash.

4. Press the mute switch (black wheel on the top of the headset) straight down until a green light appears on the headset, then let go of the wheel, and the light should remain on the headset.

5. Resubscription is finished when the red light on the base is fully illuminated and the green light on the headset disappears.

6. Remove the headset from the charging base lift telephone handset/press headset button if not using a handset lifter. The headset and base should now be connected.

7. If this procedure does not resolve your issue to try a system reset.

Apr 22, 2009 | Comdial 8012S-GT Corded Phone

1 Answer

Headset 1 will not function


Hi and welcome to FixYa,

Initially, try swapping the batteries. If the erring handset turns on and works, then it could be:
  • battery and/or handset's battery contacts;
  • charger and/or charger contacts.
If on the otherhand, the unit will still not work, then it would be an internal electronic/hardware fault. Repairs would require familiarity with electronic components & circuitry, use of a DVM/VOM and a soldering iron. Foremost to check would be for the absence/presence of voltage on the PCB (printed circuit board).

Good luck and thank you for using FixYa.

Mar 24, 2009 | GE 27996 Twin Cordless Phone

1 Answer

Nortel T7316E, How to make headset work ?


Look in the System coordinator guide 5.0 for HandFree

Select type of handfree
You must set the Handsfree at: auto
Its in the deep programming
Your going to need Business Series Terminals programming overlay to put over the phone.
  1. Press Function **266344
  2. Than enter system coordinator pass word
  3. Press SHOW once and enter your phone extension number
  4. Press SHOW twice
  5. Press NEXT tree times
  6. Change the parameter at HANDFREE with MOD
  7. Set it at AUTO
I beleved this will FIX it OK!

Jan 28, 2009 | Lands Phones

1 Answer

HEADSET


A button must be programmed as a "headset" key. When activated, it will lamp red, and put the conversation on the headset jack under the phone (next to the handset jack).

Or you can purchase a headset with an auto lifter for the handset. It picks up the handset enough to answer the call, but transfers the conversation to your headset.

Apr 14, 2008 | NEC DTU 8D-2 Corded Phone

6 Answers

Uniden cordless phone


I found that if I hold the "find hs" button on the BASE unit (right above the red charging light) for a few seconds, it works!! Thank goodness there is a solution! Thanks for the help.

Feb 07, 2008 | Uniden Cordless Phone

1 Answer

RCA 25110RE3-A cordless headset


Mine was doing the same and I just pressed the "find" button on the wall plug in thing- and the headset started working....you may want to try that.....?????

Dec 31, 2007 | RCA 25110RE3 Phone

Not finding what you are looking for?
RCA 25110RE3 Phone Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Lands Phones Experts

kakima

Level 3 Expert

98879 Answers

yadayada
yadayada

Level 3 Expert

64052 Answers

Cindy Wells

Level 3 Expert

4809 Answers

Are you a RCA Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...