I have a panasonic PV-M2768 and i don't have the original remote. I have a RCA universal RCR312W. I have tried all codes I can find. (interesting side note: the remote manual says to enter a 4 digit code but all the codes are 5 digit) I can turn power on and adjust volume but what I really need to do is access the menu in the tv to set up antenna chanels is their any way either by a combination of buttons on the front of the tv or this particular remote that will allow me to access the menu thanks

Sir try to check this link. http://www.wikihow.com/Program-an-RCA-RCR312W-Remote or this http://voxrightnow.custhelp.com/app/answers/detail/a_id/10372/~/information%2C-user-manual-and-code-list-for-the-rca-rcr312w-universal-remote Good day and best regards

Return the universal remote,if all ur tv universal codes of ur tv on the owner manual,don't work.Try website like Remotes.com to buy the tv original remote or very close capatible to it.Yes,it cost double even tripple the prices of any niversal remotes,but these remotes are 100% it will work with ur tv,because it the same or compatible as a orginal remote would.

1.Go to the url below
http://www.rcaaccessories.com/rcaaccessories/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_UNIVERSAL_REMOTES&ACTION_PRODUCT_ID=RCR312W

2. Scroll down and select the "Support and Manuals" tab.

3. Click "Owner/User Manual" link

4. Click "Code List for RCR312W" link

This is a link to your RCA RCR312W universal remote. This is a .zip file that will need to be extracted after downloading.
http://www.remotecentral.com/cgi-bin/files/rcfiles.cgi?area=other&db=devices&br=rca&dv=universalremote&md=rcr312w&kw=&st=&ar=&dt=&so=&pg=1&file=others/rca/rcr312w-manual.zip
If you have any difficulties, please post back to this site and I shall try to assist further.

1.Go to the url below
http://www.rcaaccessories.com/rcaaccessories/RcaaccessoriesProductDetail.do?ACTION_TYPE_ID=ACTION_TYPE_PRODUCT_DETAIL&ACTION_CATEGORY_IDSTR_CATEGORY_UNIVERSAL_REMOTES&ACTION_PRODUCT_ID=RCR312W

2. Scroll down and select the "Support and Manuals" tab.

3. Click "Owner/User Manual" link

4. Click "Code List for RCR312W" link

I found that this website should have all the codes and instructions for most remotes
http://www.xdiv.com/remotes/
or http://www.remote-codes.com/
if this helps please give a fixya rating

I have the same tv/vcr combo and according to my Advent unversal remote chart Panasonic code =
one of : 1003, 1054, 1062, 1109, 1170 or 1248

According to my Phillips universal remote chart = 416, 937

Hope this can help you

I can help. I too have an RCR312W remote and it did not work.
I found this code on bobvila.com message board. The code from the RCR311W remote works.


1) turn on unit

2) press and hold componet button on remote (TV, VCR, etc)
until On/Off lights up

3) press and hold On/Off while holding component button. Light will go out. Continue hoding both buttons until light comes back on.

4) release both buttons. On/Off should stay on.

5) Press On/Off repeatedly until unit turns off.

6) Press the Stop key at bottom.

7) light goes off. Remote is programmed!

the code for sylvania rcr312w is 1192