Question about Lexmark E330 Laser Printer

1 Answer

Will not print because the photoconductor kit3 at end of live but i konw you can reset it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Open front door, hold reset until lights flash up and down, press reset again, close door.
Press continue button to print the status of the photoconductor kit, it should be ok. But if you don't change the photoconductor kit, I think you can break other components.
I hope you understand this information because I am a french speaker. Good luck

Posted on Sep 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

It show 84 replace photoconductor


84 replace photoconductor on the display indicates that the photoconductor has reached its expected life rating. You may continue to print but will be at risk for developing print quality issues. It is recommended that photoconductor unit be replaced. After replacing a photoconductor unit, you will also need to manually reset the PC counter, Thanks

Sep 22, 2010 | Lexmark Lemark E352DN Laser Printer

1 Answer

Photoconductor kit? Dell 1700 printer


The photoconductor kit is another word for the drum or imaging drum. All three words refer to the same part.

Here is a link from the Dell site for this model.
http://accessories.us.dell.com/sna/PopupProductDetail.aspx?c=us&l=en&cs=dhs&sku=310-5404

Once you replace the drum, the printer has to be manually reset. If this is not done, the printer will continue to give this print out. By resetting it, the counter is set back to zero. The drum is good for around 30k prints.

From the Online Manual for the 1700, to reset the counter:
http://support.dell.com/support/edocs/systems/1700n/en/index.htm#online_documentation

To reset the counter, press and hold the Cancel button until all lights flash in sequence.

NOTICE: Resetting the imaging drum's counter without replacing the imaging drum may damage your printer and void your warranty.

Jun 18, 2010 | Dell 1700n Laser Printer

1 Answer

Photoconductor kit


you must reset the error message; find the explanation in the photoconductor kit package

Sep 29, 2009 | Lexmark E238 Laser Printer

1 Answer

I can not clear the error I m getting for photoconductor kit3


THIS MAY NOT SOLVE ISSUE BUT GO TO FIXYOUROWNPRINTER.COM, LOTS OF FORUMS/SOLUTIONS TO PROBLEMS FOR DELL 1700. MANY ARE SHARING SOLUTIONS.

Sep 06, 2009 | Lexmark E342n Laser Printer

1 Answer

Dell 1720 flashinf replace drum- error.


I believe this message is occur because the laser printer drum needs to be replaced, not the toner cartridge.

These are two different things. The part is a DELL 310-8710 Drum Unit. Just google DELL 1720N drum and you should be able to find one.

May 29, 2009 | Dell 1720dn Laser Printer

1 Answer

The photoconductor kit3 has reached the end of its useful life...please replace


...so replace the photoconductor...pick one up at any office supply store.

Apr 15, 2009 | Lexmark E232 Laser Printer

3 Answers

Dell 1720 flashinf replace drum- error.


The second link was the helpful information. Also, to cut through all of that --

If you need to reset the counter:

1. Remove drum kit with toner

2. Make sure all print jobs are flushed otherwise whatever has been sent and not printed will come spewing out.

3. Hold down CANCEL Button until all lights flash through.

4. Slide the drum kit and toner properly into the Printer.

done.

Mar 03, 2009 | Dell 1720dn Laser Printer

3 Answers

How do i reset a new photoconductor in lexmark e450dn.


According to Lexmark E450DN service manual;
1. Turn off the printer.
2. Press and hold Checkmark and Right Arrow buttons.
3. Turn on the printer.
4. Release the buttons when 'Performing Self Test' displays.
The message CONFIG MENU displays on top line of operator panel.
5. Scroll down and select 'Reset PC Cnt.'

Sep 25, 2008 | Lexmark Printers & Copiers

3 Answers

Lexmark E238 Laser Printer


Here are the steps to reset the page count on a Lexmark E234, as described here:
  1. Power the printer on and get it to the Ready state.
  2. With the printer on and in the Ready state, open the front cover.
  3. Press and hold the Cancel button until all of the lights begin flashing up and down.
  4. Release the Cancel button and close the door. The photoconductor count should now be reset.
Hope that helps!
-MetaB

Aug 12, 2007 | Lexmark E238 Laser Printer

Not finding what you are looking for?
Lexmark E330 Laser Printer Logo

602 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Printers & Copiers Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18297 Answers

Are you a Lexmark Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...