Question about Kitchen Ranges

Open Question

Maytag Gas Range - Precision Touch Control 700 - Burners and Broilers work but oven quit. Any thoughts?

Posted by on

  • 6 more comments 
  • Jape77 Jul 30, 2008

    Same here: Maytag Gas Range - Precision Touch Control 700 - Burners and Broilers work but oven either quits or won't go above 150 degrees


  • Anonymous Aug 07, 2008

    SAme exact deal for me


  • ricoshotfire Sep 04, 2008

    Oven does not work either. Tried the self cleaning and that works, meaning the temperature does increase within the oven. I have no idea what part needs to be replaced but I am sure it is an easy fix. Any help will be appreciated. Thanks.

  • rhondalaw Oct 20, 2008

    I have a Maytag Gas Precision touch control 500 and the oven will not heat up. Everthing else works. please does anyone know why so many people have this same problem? thanks

  • dxp178 Jan 31, 2009

    Same issue...will fire up the range..even the broiler works, but the oven stays at 100 degrees

  • much1 Feb 01, 2009

    Same deal. Oven not working, everything else works!

  • Anonymous Mar 09, 2009

    same

  • heynay26 Apr 07, 2009

    Mine too. Replaced the ignitor and that didn't work either.

×

5 Suggested Answers

rickzilla
  • 706 Answers

SOURCE: circuit blows and when we get it back on the fault code says H3

Hello rcgrecco,
I will try to assist you but will be making some assumptions based on your problem description. First off, when you say it takes a few tries torest the fuses.. are you referring to circuit breakers? or changing out fuses a few time until it begins to work ok? In either case, the fact that it is drawing more current than the service ( fused or circuit breaker protected implies that you have one of two problems, 1. undersized service ( meaning the fuse of circuit breaker which protect the circuit is under-sized) or 2. a short internal to the stove or receptacle that supplies power to that stove.
I would approach a solution in this manner. Remove or disable power to the stove then open the wall receptacle and ( with power verified and off) tighten all wire junctions.. I have seen cases where a loose wire termination becomes resistive and then in order to meet power demand at the burner, more current is drawn which in turn causes the breaker or fuse to trip..) I would also check the terminations at the point of entry for the power cord at the stove. Make sure all the wire terminations are tight. Once you've done that, try turning on one burner at a time and see if the service remains on or trips the protector ( fuse/breaker) I wouldn't use the oven until I verified that each burner works OK.. then try the oven by itself.. and add a burner .. then two.. ( the point being is to try to determine if you have one of the heating elements shorting. 12:00 flashing is the default time setting after power is lost and restarted. I am almost 'questioning your electricians findings" since circuits do not trip unless there is a fault ( too much current being drawn or the service is under-sized for that oven) or... the circuit protection in and of itself is failing due to marginal components. The fact that it is getting worse suggests that whatever was shorting is shorting more frequently.. perhaps a heating element is shorting after it gets hot.. they are typically resistive elements and it is possible for a short to develop between the core material and the protective jacket.. I hope that helps you... or at least provides a few ideas on where to look...
Regards,
Rick

Posted on Feb 16, 2009

shinn8
  • 85 Answers

SOURCE: We have a Maytag Gas Range, Precision Touch

Likely your oven igniter is bad. Part number 74007498

Posted on May 18, 2009

  • 67 Answers

SOURCE: maytog gas oven model 5765QDB--oven will not heat up

you need to replace the oven ignitor

Posted on May 18, 2009

EllaWatson25
  • 725 Answers

SOURCE: I have a Maytag Gemini Precision touch 750 series

This sounds like your ignitor has gone out. The preheat will work because the valve doesn't have to ignite to heat to 100 degrees, but whent he unit is ready to ignite, the gas can't ignite it. If you will call or email us, we'll be sure to get the correct ignitor out to you asap so you have your oven orking right away! Thanksgiving is just around the corner, so I hope you get this repaired soon. We hope this helps and we hope to hear back from you soon.

Posted on Sep 30, 2009

BarrettDenCo
  • 1772 Answers

SOURCE: Maytag Gas Range With Touch Control Model: CRG9800C,

Sorry to read about your problem, I hope this helps you out.

You could have 3 different problems.
1. defective gas control valve to the oven
2. defective temp probe
3. defective gas control knob

THIS IS A GAS PRODUCT, INCORRECT REPAIR CAN CAUSE A EXPLOSION, AND DEATH CAN OCCUR. IF YOU DO HAVE THE PROPER TOOLS SUCH AS MANOMETER AND LEAK DETECTORS, I SUGGEST YOU CONTACT A SERVICE COMPANY.

I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question. take the time to rate us.Thanks and good luck

4 Thumbs - Very Helpful
3 Thumbs - Helpful

Posted on Dec 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

One burner will not turn on - This is a Maytag Precision Touch control 500 electric smoothtop


hi there,

on this case try to clean the gas burner for any dust and corrosion inside. also check and test the ignititer of the stove/

let me know.

Jun 02, 2009 | Maytag MER5770 Electric Kitchen Range

1 Answer

I have a maytag MGS 5770 ADA range/oven. The oven does not heat. The top burners and broilers work fine. However, the bottom oven burner doesnt kick in. the igniter glows red hot but the gas never...


I would start by replacing the ignitor. It could glow enough to light the oven, but to maintain the burner, it often re-ignites several times during a cooking cycle. I have had the problem before, replaced the ignitor and all was well. You should be able to find an ignitor for under $40 online. Just google 'Maytag oven ignitor' and you should find many offers. My sister just bought one for $19.99!

Mar 15, 2009 | Maytag MGS5770 Gas Kitchen Range

1 Answer

Gas Oven Won't Light


make sure the wire is connected to the ignition(where it sparks)if it is gently clean the sparking surface with a piece of fine sandpaper.Hope this helps,if it still does'nt work you may need to replace this part but it should'nt be expensive and you can do it yourself(usually one screw) ps sorry for the late reply.

Mar 07, 2009 | Maytag MGR5755QD CleanDesign Gas Kitchen...

1 Answer

I have a maytag MGS 5770 ADA range/oven. The oven does not heat. The top burners and broilers work fine. However, the bottom oven burner doesnt kick in. the igniter glows red hot but the gas never...


HI thanks for your question. the part that is faulty is the igniter, it does not get hot enough to ignite the gas. replace the igniter. thanks the appliance doc. please rate my answer. thanks.

Jul 09, 2008 | KitchenAid KESC307 Electric Kitchen Range

1 Answer

Maytag MGR5875QD stove problem


bake and broil feature not even responding to touch???? its one component " the electronic range control" clock assy. after trying to unplug and possible resetting the control. i would say youll need to replace the control unit.

Mar 23, 2008 | Maytag MGR5875QD CleanDesign Gas Kitchen...

1 Answer

Oven wont work at all.


Convection oven and Bake will not heat past 200degrees. Broiler works fine and the range works fine.This is for the Model # MGR5875QDW, Gas Precision Touch Control 800, can you help. Thanks Kasz3

Dec 24, 2006 | Maytag MGR5875QD CleanDesign Gas Kitchen...

Not finding what you are looking for?
Kitchen Ranges Logo

Related Topics:

713 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kitchen Ranges Experts

Dan Webster
Dan Webster

Level 3 Expert

8147 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...