Question about Kenwood KDC-135 CD Player

2 Answers

Kenwood kdc-119** it wont read my discs at all and when i turn off the car it loses memory and i have to reprogram everything.. did i not hook it up rite???

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

Lost the plug for my kenwood kdc-119 cd player. i made a plug but the wiring color is not right. can anyone tell me what they are from top left and go right, then bottom left and go right? thanks

Posted on Dec 08, 2010

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 30 Answers

No, you have the battery wire hooked up to the ignition switch.
Here is the owners manual with wiring diagram.
http://inform3.kenwoodusa.com/manuals/KDC219.pdf

Yellow wire must go directly to fused HOT (battery).Not through ignition switch, red goes to switch.
Good Luck
Leadispenser

Posted on Aug 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenwood KDC-319 CD Player Logo Problem with KDC-319 CD Player installed a kenwood kdc 319 in a 04 chevy malibu when i have car off i turn deck on an my cars dash board lights turn on Posted by A


I would start by disconnecting the radio and hooking it up right,the power should go through the ignition switch.So that when you turn the car off the radio will go off and to hear it on again you have to turn the key to accessory or start it.That might take care of a few of your problems.

Jun 25, 2012 | Kenwood KDC-319 CD Player

1 Answer

When i turn the car ignition off, the stereo loses the station memory


The yellow wire needs to be connected to a constant live.Then it wont lose your stations

Mar 14, 2010 | Kenwood KDC-3027A CD Player

1 Answer

Does the kenwood kdc-2025 have a way 2 hook up a mp3 or i-pod?


no, it says mp3 player because it can read mp3 discs that are burned with Kenwoods software.

Dec 30, 2009 | Kenwood KDC-2025 CD Player

1 Answer

I bought a kenwood KDC-BT742U and I'm putting it in my 96 saturn. I connected all the speaker wires and I believe I ran into my problem with the ground wire (black) power wire (red) and a power control...


as far as i know there is no green with a white stripe on kenwoods, unless you are looking at a blue with white, which is an amplifier remote turn on wire. you should have a yellow wire which needs to be connected to a constant power source, as this wire keeps the radio preset and clock from losing memory.

Dec 14, 2009 | Kenwood KDC-BT742U

3 Answers

Kenwood KDC-119 car stereo problem


There is a small hole at the bottom of the stereo face that will reset the system. I pushed a pen tip into the hole and it turned the stereo off. When I removed the pen, the system turned on and the CD ejected. Problem solved.

Jul 02, 2008 | Kenwood KDC-135 CD Player

Not finding what you are looking for?
Kenwood KDC-135 CD Player Logo

651 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio Receivers Experts

xxxxxx xxx

Level 3 Expert

4706 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Pablo Gonzalez

Level 3 Expert

733 Answers

Are you a Kenwood Car Audio Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...