Red convergence shadowing problem - phillips 60pp9202

You need to replace your convergence IC's. You also need to check the resisters in the convergence circuit to make sure they didn't go bad.

It sounds like a convergence problem; depending on your skills it may or may not be something you can do (parts cost on EBAY will be under twenty dollars).

I will attach some convergence photos: does your set look anything like these?

If it does and you can solder etc I can tell you the best place to get the parts and how to do it.

Before you rate this information let me know what you find.









SD TECH

you need to replace the convergence ic's you can get a convergence kit from.
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} http://www.tvrepairkits.com/xcart/home.php?partner=larry
techman

Ur convergence is dead.Know how to solders?Must changed the 2 convergence ICS,and all it resistors.Tries Tv repair World.com,Tvrepairkits.com for the convergencce kit.The shop will cost $300 for parts and labors.

This is a common problem. Your convergence has gone out.

Common symptoms are...

1) 3D Video
2) Warped Video
3) Convergence menu does not adjust the red or blue correctly.

Go here for a solution...

http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

check resistors on convergence board for open ,check wiring and make sure cables were placed in right place then perform auto convergence

did u fix your tv cuz thats the same thing thats happening to me

The convergence chips are toast. This is a common problem. Goto the site www.TvRepairKits.com to get a repair kit with instructions. 

what about blue? this is an indication that maybe one of the convergence ic have failed. generally you replace both. falure of the ic can also be sympton of other problems.. The oputput ic resistors. the covergence power fuses. but the first step is to replace the ics

I fixed this tonight -- it was the convergence amps, which I purchased for $20. Thought it was the convergence board at first but it turned out to be the amps, which commonly fail after 3 years or so.