I have a baumatic bkd46s and it doesn't seem to heat up even after replacing the element.

Check the elements for continuity. Some ovens will do strange things if one element fails due to shared returns.

https://www.google.com/search?q=baumatic+bt2750ss+checking+element

..

Most all heating elements are held in place the same way, so see if the youtube video works for you. How to Replace Lower Oven Element

I am going to say you have a faulty thermostat.

it will be the element has failed
replace it

https://www.google.co.uk/search?q=Baumatic+BA06003+element&ie=utf-8&oe=utf-8&gws_rd=cr&ei=-qiBVIePO7Kt7AbxhIHYBA#q=Baumatic+BA06003+element+ebay

here is a search to the element you need on ebay etc or epares
shop around for the best price inc post etc.,..

It sound like the heating element burned out. Check the element and see if there is a burned spot or blister somewhere along the element. If so the element will need replacing.

test the drying element to see if power is getting there during the drying cycle. if it is getting power but not heating you will know to replace the element. if it is not getting power, you will have to check the components that supply power to the element

if it is the b180, the answer (having just fixed this) is really simple.

The coily bit is the oven element - it will have gone. A new one from eBay cost me about 6 quid.
[WHEN IT ARRIVES !]

Turn the power off.
Inside the oven use a philips screwdriver to remove the 4 screws (KEEP THEM !)
You will see a coily thing and a fan.


You unscrew 3 more screws (2 on the left and 1 on the right).
(KEEP THESE TOO!)

now ... bit tricky, have the new one inside the oven and take each wire off one at a time and put it on the new element.

Screw it back on but DONT put the last panel back in.

Turn the oven on maximum for about 2 minutes and see it glow red.

Turn the oven off. Make a cup of tea and have a couple of biscuits while admiring how good you are and waiting for the element to cool down!!!

Put the final panel back in place. Whole thing (including a cup of tea) takes about half an hour.

its "malfunction of temp sensor or heating element"so it is either the heating element or temp senser.is faulty test and replace the faulty part

If fan is working then the element has probably gone

ohm out the element if it shows no continuty then replace it