Question about Philips Remote Controls
We are on vacation and have an orion tv with a philips universal remote control.......the code has been de-programmed and therefore the remote will not worked.
Thisis the user's manual for a Phillips remote control. There is a list ofcodes in it. They should be rather universal. There's also instructionsas to how to program it. I believe that there is a way to program itwithout using the codes.
Programming with Code Search
1. Manually turn on the device (TV, VCR, etc.) to be controlled.
2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.
3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.
4.Press the Channel Up button repeatedly (up to 300 times) until thedevice could be controlled changes channel. The red indicator blinks,then stays lit. If you accidentally overshoot the code required, pressthe Channel Down button to backtrack through the library until thedevice changes channel. Pressing Channel Up changes direction toforward again. Press and release the Mute button to install the code.
Hope this helps :)
Posted on Jul 29, 2008
Tips for a great answer:
Jun 07, 2010 | Universal Remote Control Philips Pronto...
May 12, 2010 | Philips Magnavox Learning Universal Remote
Sep 12, 2009 | Philips Universal PH301S Remote Control
Mar 29, 2009 | Remote Controls
Feb 08, 2009 | Philips Universal PH301S Remote Control
Feb 06, 2009 | Philips Universal PH301S Remote Control
Jul 05, 2008 | Philips Universal PH301S Remote Control
1,720 people viewed this question
Usually answered in minutes!