Question about Brother SE-270D Computerized Sewing Machine

1 Answer

Brother SE-270D dispaly just F06 in LCD Panel

My machine starts to turn off when I was working and then I just give a little blow and it started again until it turn off definitively, then a Technician find a fuse that it supposed to be wrong and he change it, but now it turns on but does'nt work it just say F06 in the LCD Panel, it seems like it lost memory or something like that. please help!! I can't work!!

Sorry about my english I am Spanish :)

Posted by on

  • aleemtya Aug 12, 2008

    Thanks, I was already fixed it, it just was that you have to do something like "restart" the machine pressing 2 buttons on the panel and the On button, thanks anyway...

  • bobbiemckee Aug 23, 2008

    brother se 270-d displays F06 in LCD panel

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 29 Answers

Contact Brother
http://www.brother-usa.com/homesewing/

To the left on the above site is a software download page.

If you need further help.. email brother...they will tell you how to fix this. Takes them a day or so to answer.

Sounds like the technician may have put in a wrong fuse himself. Hoping it was a Brother authorized dealer.

Posted on Aug 12, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 270D machine keeps stopping and resetting in the middle of a pattern. I have to turn the machine off and go to the correct screen to start again. I take it forward to where it stopped and within second,...


Sounds like it thinks it doesn't have room to finish the rest of the design - my Janome does that sometimes too. Can you rehoop it? or maybe a faulty pattern.

Feb 09, 2010 | Brother SE-270D Computerized Sewing...

1 Answer

I have a Brother SE-270D. The top thread is not


A bent needle will cause this. Otherwise the shuttle is out of time, have it serviced..

Feb 09, 2010 | Brother SE-270D Computerized Sewing...

1 Answer

Error message on Brother SE-270D sewing machine


The safety device will activate if the machine has a bind or is unable to run at correct speed. If you turn the handwheel is it tight/hard to turn? if it is than thats it. Now what is binding the machine has to be diagnosed.

Jul 22, 2009 | Brother SE-270D Computerized Sewing...

3 Answers

Presser foot lever


Hi and welcome to FixYa,

Initially, pls try a reset. This could be accomplish by unplugging the SE-270D from the mains. After an extended period, plug back in and power on normally. In some variations, there would be a reset button/key/switch.

Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Nov 24, 2008 | Brother SE-270D Computerized Sewing...

2 Answers

Fo4--What does it mean and where do I find the translations?


F04 is foot control error. It is probably a bad foot control, but it may be the plug in on the machine or a circuit board.

You can run the machine without a foot control for now; just unplug the foot control from the machine and use the Start/Stop button like you would when embroidering.

Before replacing the foot control, you should bring the machine to a Brother shop and try a new control. If the new one works, then the control was the problem.

Aug 03, 2008 | Brother SE-270D Computerized Sewing...

1 Answer

Brother 2003D jammed


i am not familiar with the brother safety device myself. however things i would check might be to first check the manual for the machine. if not available try to turn the machine off if it is electronic in hope that it would reset itself. i would also totally unthread the machine and change the needle. embroidery machines need to have needles changed more often due to their high speeds.What type of fabric were you sewing on? Some of the newer machines are just not made to sew on very heavy fabrics and this might be causing something in side to spring. Try to stitch on a lighter fabric with a stabilizer under it

Apr 30, 2008 | Brother SE-270D Computerized Sewing...

Not finding what you are looking for?
Brother SE-270D Computerized Sewing Machine Logo

Related Topics:

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Sewing Machines Experts

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18304 Answers

Irene Tulloch

Level 2 Expert

434 Answers

Are you a Brother Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...