Question about Computers & Internet

3 Answers

After using my model NOCC3,with no problems,I had to replace the battery.After doing so the unit worked for approx.one minute,then went dark. Checked battery voltage with a digital volt meter. Found voltage to be 3.3 volts. What Now ? Jack Hynes

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 19,396 Answers

Ensure you charged battery completely before proceeding. Remove and put back battery than charge completely, if you still get trouble there is probably a short in battery contacts

Posted on Jul 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

If you switch back to the old battery does it work at all? does it work on the charger without a battery?

Mainboard problem possibly?

Posted on Jul 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 555 Answers

What is the maker of this model NOCC3 PDA?

Posted on Jul 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My night vision scope will not turn on. My LEDs work but you can not see anything in the lens. Yes the cap is off. I tried new batteries. It has very few hours of operating time. Help!


Hello, Welcome to the world of Russian night vision system. That is right, Night Owl Optics Cyclops NOCC3 is manufactured in Russian. The biggest problem with these monocular and binoculars and even scope is that they use cheap 1st generation Russian image tubes and everything else. It would be cost prohibitive to have it fixed, that is, if Night Owl Optics will fix it for you. Hint: Auction it on Ebay as night vision parts. Sorry, GB...stewbison

Nov 30, 2010 | Night Owl Optics Cyclops Compact NOCC3...

1 Answer

Night owl nocc3 looks like a star field inside


it sounds like the light "pickup" at the front is not working,, was it stored with the front lens cap fitted and in the dark? if not you may have bamaged this "pickup" it could also just be dirt on it,,you can undo the front lens and clean the "pickup" if the unit is turned off and you use a soft lint free cloth

Jul 31, 2010 | Night Owl Optics Cyclops Compact NOCC3...

1 Answer

Yesterday when I went to work the battery and brake light were on when I got off the exit to get to work the battery and brake lights went off. Approxmitaly 12 hours later when I started the car to go home...


Try a day time running light modual,these things are notorious for messing up,and since they are supposed to work when the car is charging it seems like the logical solution.

Jan 13, 2010 | 2001 Mitsubishi Montero Sport 4WD

2 Answers

The last two times using my etrex Legend, after it had been on for approx. 5 minutes, the screen went black with a vertical line going from top to bottom. The only way to restart was to remove the battery,...


The issue that you are having is directly related to changes that are being made in WAAS satellite signal. Garmin is aware of the issue and has a software update that will resolve the freezing problem that is being exhibited on your GPS. You may download this software update into your unit at the following
link:

http://www8.garmin.com/products/webupdater/howtoinstall.jsp

In the mean time you can remedy the issue by temporarily disabling the WAAS reception from your system setup page.

Oct 01, 2009 | Garmin eTrex Legend GPS Receiver

1 Answer

Panasonic base unit went dead


THROW IT AWAY.  I HAVE THE SAME PROBLEM AND PANASONIC AFTER SALES "SERVICE" PEOPLE  HAVE BEEN COMPLETELY USELESS!

Mar 10, 2009 | Panasonic KX-TG4500 Phone

1 Answer

Garmin will not turn on.


I don't know what type Garmin you have but the problem usually is the battery. On my c550 I can open up and unplug the connector where the battery wires go to. Leave unplugged for approx 30 seconds then replug. The unit will usually restart like new. Might work with your Garmin.

Feb 10, 2009 | Garmin Nuvi 760 Handheld GPS Receiver

2 Answers

Erratic beeping


This is a signal that the battery is dying, and is failing the self-test. According to Conext, the battery replacement alarm goes off for one minute every five hours. You should also see the replace battery light on the front of the unit lit. Changing the battery should solve your problem.

Jan 01, 2009 | APC Conext 900VA (cnb900) UPS System

3 Answers

GPS screen went blank


My problem exactly. Unit would start up, acquire satellites, then the screen would go blank with a single vertical line. Unit would not respond to buttons or even turn off. Unit works fine after I did the reset:

- w/unit OFF, press and hold QUIT+DOWN+MENU
- press and release the power button, release DOWN, keep holding QUIT+MENU for 5 seconds.
- unit prompts something like: "erase all data;" choose yes.
- you will lose waypoints, etc.

Go to the Garmin support area for details.

http://www.garmin.com/garmin/cms/site/us/support/searchsupport

Search for: "How do I reset my gpsmap 76"

Oct 06, 2007 | Garmin GPSMAP 76 GPS Receiver

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...