Question about Audio Players & Recorders

Open Question

Sanyo architect series synthesizer tuner stereo integrated amplifier stereo sound controller - sound coming from 1 speaker only. Tested speakers - OK. Problem within unit

Posted by on

5 Suggested Answers

  • 165 Answers

SOURCE: tx-38/28 quartz synthesized tuner amplifier

hello surely there,s a problem in connection firs do this check your jbl even if they new with a baterry they pop up,now make sure you connect the monster wire into the outputs remember the wire is too thick make sure your getting contact in outputs...saludos

Posted on Nov 27, 2008

  • 3 Answers

SOURCE: When i turn the power on onmy Technics stereo

If interested in selling send me an e-mail,
POS1469@zoominternet.net

Posted on Mar 18, 2010

dunnbiker
  • 8546 Answers

SOURCE: i have a fisher ca-9335

Something doesn't add up. You mention two connections to the speakers - CA-9335 and a "simple jvc cd player". Is that true? If so, you might want to UNconnect the CD from the speakers and run it into the receiver where it belongs. An amp isn't designed to share the load with another live device; or even have electrical contact with anything BUT speakers.


Did you actually find documentation that supports this hook-up? Or just winging it?

Posted on Feb 21, 2011

Testimonial: "thank you it works great now "

dunnbiker
  • 8546 Answers

SOURCE: Sanaui stereo integrated amplifier A-3100 I have

You're going to surround yourself with a smoke effect if you insist on presenting too low an impedance load to the amp. Add the speakers in series if you must add them at all.

I imagine if you look really close at the back it might say what the minimum impedance is.

Posted on Apr 25, 2011

  • 4234 Answers

SOURCE: I am looking for the

I don't believe that these are available electronically without cost. If you can describe the problem you are trying to solve, I may be able to guide you through the repair.

Dan

Posted on May 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i hook up speakers to my MCS 3873 integrated stereo amplifier and 3051 quartz synthesized stereo tuner?


have fun trying to find that,why dont you just hook them up by the labels on the equipment,out means from input means to

Jul 28, 2015 | Audio Players & Recorders

1 Answer

I have a 1987 model kenwood home stereo system ihave a graphic equalizer ge 76 control amplifier kc206 synthesizer tuner kt76 power amp km206 how does the RCA connections hook up which ones go to...


First connect all sources like tuner, cassette player, Cd player into the proper RCA inputs of the control amp, then connect the output of the control amp into the input of the equalizer. Then connect the output of the equalizer into the input of the amplifier. This is how to get the best performance and proper outputs to all the right equipment. The speaker outputs of the amplifier would then go to the speakers.

Let me know if you need more help from me by addressing your post to me, or if you wish to communicate with another expert you can address your post to them I.E. @tech48 or @whoever

Thanks and good luck,

Dave

Sep 27, 2008 | Kenwood Audio Players & Recorders

1 Answer

I need to know how to hook up Sony amplifier ta-ax 295,Sony tuner st-jx 295, sony cassette tc-w295 with a RCA 5 disc CD player and a Samsung DVD/ video CD/CD player in stereo. It always worked when my...


There are a number of amplifiers in the TA series, but the connections are basically the same.
In your system, the amplifier serves as master control. How do you know? Look for the component that offers input selection -tuner, cassette, CD, video, phono and probably auxiliary. Every other component plugs into and is controlled by the integrated amplifier. For example, plug the tuner wires from the tuner output to the amplifier input marked "Tuner." To use the tuner, just select that input from the front panel. Same with all the other components.

On the back of that unit will a bunch of RCA jacks for left and right channels. Take the hook-up wires, usually RCA cables with colored plugs on each end, and connect the OUTPUT jacks on each separate component to the INPUT jacks on the amp. Power may also be controlled from the amp. On audio plugs, red is right and white is left. Keep the polarity constant as you connect each component. Connect the speaker wires to the speaker outputs, usually spring clips or screw terminals on the amplifier end and the same on each speaker. The DVD video cable will have three wires: Yellow, red and white. Yellow is always video. It may also have a little round video connector for S-VHS which provides a much better picture when using DVD.
Select your desired input and enjoy the show. Service Manual free download schematics datasheets eeprom bins pcb...

Jul 13, 2014 | Audio Players & Recorders

1 Answer

Marantz Legacy Series - no sound is getting to speakers from tuner or cassette.


It seams like the amplifer is not working and you are right but it certanly needs to be measured first.

Nov 28, 2013 | Marantz Tr 2242 Sb Legacy Series Pll...

1 Answer

Speaker buttons don't function correctly


The Speaker A and Speaker B buttons select pairs of speakers. If you have connected a pair of speakers to the "SPEAKER A" terminals on the rear of your Onkyo receiver, you will hear stereo sound when the Speaker A button is pressed on the front panel. If, for some reason, you wanted to connect a second set of speakers in the same room or perhaps another room you would connect those speakers to the "SPEAKER B" terminals on the rear. Pressing both buttons on the front panel would send sound output to both sets of speakers

Jan 17, 2013 | Onkyo Quartz Synthesized Tuner Amplifier...

1 Answer

I just got a Kenwood system, i would like to know how to hook it up, it has, Kenwood power amplifier km207, kenwood stereo control amplifier kc 207, disc player dp-m 97, cassette deck ky-77 cw, stereo...


That's a pretty standard setup. RCA cables from the KM207 to the preamp (KC207), and RCA cables from all of the other components into the KC207. Speakers connect into the KM207

Nov 01, 2012 | Master DE Kenwood with Housing...

1 Answer

Hi, I have a onkyo tx-27 quartz synthesized tuner amplifier and I'm trying to conect it to my tv , so I have the red and white cables and I did the conection with the speakers and there is no sound...


Well, the TX-27 has an onboard FM tuner. Is the amp working for IT? If not, you have an internal problem or a switch out of position. Turn the volume to something reasonable before troubvleshooting.



Jul 09, 2011 | Onkyo Audio Players & Recorders

1 Answer

What are the classification of simple machune


Hi,
Specifications Display Image Aspect Ratio: 16:9 Widescreen Modes: Conventional 4:3 Comb Filter: 3D digital Additional Features: V-Chip, parental control Diagonal Size: 42" - widescreen Display Format: 1080p (FullHD) Resolution: 1920 x 1080 V-Chip Control: Yes Image Contrast Ratio: 2500:1 Brightness: 500 cd/m2 TV Tuner Stereo Reception System: MTS Secondary Audio Program (SAP): Yes Analog TV Tuner: NTSC Video Features HDTV Ready: Yes Analog Video Input Signals: NTSC Input Video Formats: 1080p Remote Control Type: Remote control Audio System Sound Output Mode: Stereo Sound Effects: Virtual Dolby Digital Speakers Included: 2 speakers Additional Features: Mute button Speaker(s): 2 x right/left channel speaker - built-in Connections Connector Type: 1 x composite video input ( RCA phono ) ¦ 1 x S-Video input ( 4 pin mini-DIN ) ¦ 3 x audio line-in ( RCA phono x 2 ) ¦ 2 x component video input ( RCA phono x 3 ) ¦ 3 x HDMI input ( 19 pin HDMI Type A ) ¦ 1 x digital audio output (coaxial) ( RCA phono ) ¦ 1 x audio line-out ( RCA phono x 2 ) Power Power Device: Power supply - internal Power Consumption Operational: 240 Watt General Product Type: 42" LCD TV TV Tuner: 1x analog, 1x digital Width: 41.3 in Depth: 10.2 in Height: 29.7 in Weight: 55.1 lbs HDCP Compatible: Yes Digital Television Certification: HDTV Digital TV Tuner Digital TV Tuner: ATSC, QAM Additional Specifications HDMI: Y More Information Model No.: DP42848 Shipping Weight (in pounds): 67.0 Product in Inches (L x W x H): 41.3 x 10.2 x 29.7 Assembled in Country of Origin: USA and/or Imported Origin of Components: USA and/or Imported Walmart No.: 000503420

hope this will be helpfull to you.
GoodLuck

Feb 02, 2011 | Sanyo 42 in. LCD TV

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

505 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

4804 Answers

The Knight
The Knight

Level 3 Expert

72214 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...