Question about Dishwashers

1 Answer

Hit start button and nothing happens Kenmore Diswasher

Thanks for your reply. I have already looked at that page. There is power to the dishwasher, I'm not sure about the door switch but it runs fine through a test cycle which I doubt it would do if the door switch was faulty, I took the door apart and the wiring looks fine, I'd like to know other suggestions before I spend $170 on new electronic panel. Thanks

Posted by on

  • kyleketterin Nov 03, 2008

    I have the same problem. My Kenmore 18" looks to be about 6-10 yrs old and just recently stopped working. The selector dial on the door used to start a cycle but now nothing happens when I try to start a cycle. I've tried all the different wash settings but nothing works anymore.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dishwashers Master
  • 13,433 Answers

Ginko has posted you another solution so

go back into the premium page
http://www.fixya.com/support/t847689-hit_start_button_nothing_happens

click on request more assistance(repost the problem, im not sure what it looks like on your side, but theres a button you can press to reject my solution and read the other solutions that have been posted) so you get ginkos solution into your screen if not visible already.

Posted on Jul 28, 2008

  • Ekse Jul 28, 2008

    I personally don't have other suggestions.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Clean button will not go off


Alternate solution: Within 6 seconds, alternately press "heated dry" then "normal" buttons. Wait for all lights to come on and for the diswasher to finish washing the load.

Jun 19, 2010 | Whirlpool 24 in. DU1100XTP Built-in...

1 Answer

My Frigidaire dishwasher won't start. I just moved into a condo and the dishwasher worked during inspection but now it's not...wondering if it's something I just don't know about. The model number is...


Did you ever get an answer to your problem.

I've got same issue where I turn the diswasher on and nothing happens ... the time just start going down but nothing is happening?

May 22, 2010 | Frigidaire 24 in. PLD2850 Built-in...

1 Answer

Dishwasher won't start


may be in flood mode. tip the unit sideways and see if water leaks from the base if so continue to tip it until it all drains out, then start it on a wash if it starts you have a component leak that will have to be sourced.

Mar 14, 2009 | Dishwashers

1 Answer

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad.

Jan 24, 2009 | Dishwashers

1 Answer

Ultrawash kenmore diswasher


Hi TUXI,

I'm Harvey the Master Plumber.

Your problem is: bought d/w in 2005. used it about once a week. worked great. one day, nothing happened. No lights on panel come on! power to it is good, of course you didn't buy the extended warranty! Would like your help/advise.

First recheck the electrical connection in the junction box under the d/w. It could be you have a loose or broken connection. If all is well there you probly have a bad control board. I don't recomend this repair to the average homeowner. You might consider the Repair Directory for a repairman.

Feel free contact me again!
Please give me a rating here at fixya before you sign off
Thank you,
Harvey your Master Plumber

Sep 21, 2008 | Kenmore 24 in. 15932 Built-in Dishwasher

2 Answers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I just read this for the same problem: push sanitize, then heat and dry, sanitize, heat and dry, sanitize, heat and dry, cancel, then open and close the door. It worked. The dishwasher is running correctly even as I type this. 

Feb 11, 2008 | Kenmore 24 in. 17262 Built-in Dishwasher

1 Answer

Diswasher stopped working


there is a fuse in the washer that needs to be replaced reply to me and will walk you through it

Dec 31, 2007 | KitchenAid 24 in. KUDI01FLSS Stainless...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3053 Answers

Electrolux
Electrolux

Level 3 Expert

4342 Answers

Are you a Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...