I pod will not play & screen will not change - Audio Players & Recorders

The Marshall is a super clean acoustic amp.

The POD is overloading the amp.

Try the electric guitar input and keep the gain on the amp down, keep the EQ level and use the POD and the end volume to adjust the final volume.

The normal inputs is for a low output acoustic pickup - the POD is a high output electronic source.

Start with the Marshall gains low and get the clean sound good, then work on the gritty sound.

The amp is voiced for a sweet clean sound - if you want grit'n'ball change to a 50w Marshall valve head and a 4 X 12 cabinet.

Horses for courses

Hello!
My names are humphrey franklin. 4rm nigeria, pls, i need solution to my iriver pod. I tried to add mre musics, in my pod, it will enter, but, it'll never play. Pls, what do i do about it? My e-mail, humphrey [email protected]

You probably need a new gearbox. These can be bought and installed very easily.
www.cpo2go.com

This may not be the answer you are looking for but your I pod might not be fully charged, meaning that you are not plugging it in the computer/docking system long enough.( it takes much longer than 15 minutes to charge the battery. So you might want to plug it in/dock it over night) Or you may be playing a game that uses a lot of MB/GB so it kills the battery. And make sure that you press the play/pause button down for at least five seconds before switching the little switch at the top of your I pod. If you don't press the play/pause button for five seconds and just switch the switch at the top a little lock will appear on the left corner meaning you need to hold the play/pause button down for five seconds then the i pod screen goes black at that time flick the switch at the top off. -hope it helps owner of i pod nano and I pod touch.

This is simple.

Do not copy paste songs on ipod.

Just intall iTune software from www.apple.com & Add you songs to media library & sync your i pod with them.

Now you can play your songs on your ipod. This is the process of fill songs on ipod.

Thanks.
If you accepts my solution please vote me.

HOW TO PLAY MP4

turn on your ipod, go to 设定, and then go to 语言, and then click 英语. and if that does not work... if you know how to get to setup go there and click all the languages.

Is your stereo sytem amplified? if so then the remote turn on wire may be hooked up to your power antenna turn on wire. The amp needs to be connected to blue w/ white strip.......not solid blue. The solid blue turns off to lower a power antenna when the tuner is not in use. Blue with white always stays on with tuner cd or ipod.

USB mostly use for a power source. there should be a second cable with RCA plugs that go into your amps audio inputs