Question about Garmin StreetPilot C330 GPS Receiver

1 Answer

Touch screen is not working

I have a Garminc330 and the touch screen does,t work anymore. system still power on but when you touch the screen other menu shows up but not the one I want. Tried resetting several times but stiil wont work.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Calibrated the touch screen, that fixed the problem.

Thanks

Posted on Jul 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Touch screen not working


Try to remove the battery and insert it back into your gps device and turn it on. If the screen does not still work, then you need to reset the nuvi, by holding down the power button for about 15 seconds, then the unit will restart, that way the touch screen should respond. If it still does not work, then you need to calibrate the screen to get it to work. To calibrate the screen, follow the sreps below:
  1. Turn off your nuvi,
  2. Press your finger on the upper left corner of the touch screen,
  3. While holding your finger on the touch screen, turn on the nuvi,
  4. Continue to hold your finger on the screen for about 30 seconds until the calibration screen appears (white screen with touch dot),
  5. Then follow the on screen instructions.
It might not work trying it once, so you have to try it over time till it works. Calibration is the last resort of all solutions, so if calibrating it does not do the work, then it means it a an internal problem.

Dec 25, 2010 | Garmin nuvi 650 GPS Receiver

1 Answer

My touch screen doesn't work. i tried to calibrate it but it doesn't even go into calibration screen. please let me know how i can fix it. thank you


Since the touch screen is not working, what you have to do is to reset the device. To reset the device, turn it off and on to see if it does the job. If that does not do the job, then hold down the power off/on button for about 10 seconds, the device restarts, that way it should work, but if it does not still work, the only solution is for you to jeep calibrating the screen continuously till you get it done.
The proper process to calibrate your screen is for you to:
  1. Turn off your nuvi,
  2. press your finger on the upper left corner of the screen (that is before powering on),
  3. While holding your finger on the touch screen, turn on the nuvi,
  4. Continue to hold on to the touch screen with your finger for about 30 seconds or more till the white calibration screen comes on(white screen with touch dot),
  5. Then follow the on screen information.
Try it several times till you get it to work. It does not just work the moment you try it, you have to try it over and over again.

Dec 24, 2010 | Garmin nuvi 205 GPS Receiver

1 Answer

Touch screen stopped working...Garmin nuvi 650 jvdurham@windstream.net


If the Touch Screen is not working properly, calibrate the touch screen.....Turn unit off then back on

Slide Power Key to the right ( lock )

Hold your finger on the screen for about 30 seconds until the calibration screen appears.

Follow on screen instructions

Oct 28, 2010 | GPS Devices

1 Answer

The touch screen is not working properly when you


Turn the unit off and make sure the power cable is disconnected as well, get a good SCREEN cleaner. Not the same as Windex or other product. Clean the screen well, you need to get rid of the oils and dirt on the screen. Once you are finished and the unit has been dried off power the unit back up and in one of the submenus you will find a screen calibration option. Use this and you should then be finished and the unit should go where you touch. Hope this helps

Jun 19, 2010 | Tomtom ONE 3rd Edition GPS

1 Answer

Nuvi 760 powers on but the touchscreen will not work


If the Touch Screen is not working properly, Calibrate the touch screen..

Turn he unit off then on.... Slide Power Key to the right ( lock )

Hold finger on screen for about 30 seconds until calibration screen appears... for on screen instructions

May 10, 2010 | Garmin Nuvi 760 Handheld GPS Receiver

1 Answer

My touch screen will not work anymore. I tried


May I recommend performing a 'Hard Reset' (different from the reset button), or replacing the firmware of your Nuvi 205?

Both actions have been known to solve the symptoms you are reporting.

I hope that helps.

Mar 16, 2010 | Garmin nuvi 205 GPS Receiver

2 Answers

Touch screen stop working


Hello,
Omnitech GPS systems are very decent for me. I have 2.
There were several reports of GPS problems beginning on or about 11-14 June 2009. This is due to the GPS navigation messages rollover from 255 to 0. Some GPS systems fail to accommodate this behavior; Omnitech is one of them.
Staples did provide a firmware update a few days later. There are also other firmware updates available on the net. I personally successfully update the firmware and resolve the problem around June 15, 2009.
Otherwise, the problem should go away after 1-2 weeks.

thsquare

Jul 12, 2009 | Nextar Q3 GPS Receiver

2 Answers

Touch screen not working. frozen


i have a tomtom xl i conected it to the computer and now the touch screen doesnt work it turns on ok and displayers the map but if i touch the middle of the screen it selects some thing else is there a way to reset the touch screen back to the centre if you can help plz email me at nissanpatrol92@bigpond.com.au

Sep 23, 2008 | Tomtom GO 700 GPS Receiver

Not finding what you are looking for?
Garmin StreetPilot C330 GPS Receiver Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garmin GPS Devices Experts

Tom Chichester

Level 3 Expert

24685 Answers

Jonathon summesfield

Level 2 Expert

284 Answers

Bill Gilhooly
Bill Gilhooly

Level 2 Expert

94 Answers

Are you a Garmin GPS Device Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...