Question about Audio Players & Recorders

1 Answer

Connecting my inspire 5.1 to use with my sat/tv system

Hello,
I purchased a inspire T6100 speaker system by Creative. On the box cover it shows use with a home entertainment set up w/sat. I am not sure if I can use this surround sound set with my tv and sat sytem. If so, what do I need to connect it. There are no inputs on either my sat box or my tv that will connect with the three (orange, green, and black) connectors on my new speakers. Is this speaker system ONLY for use with a PC? It appears to be so. If not I need to know what I need to make it work with my set up. I have a cnx mini duo receiver box for sat, and a 58 inch rear projection big screen tv by Hitachi.

PS ( my speakers are T6100, I could not find that so I chose the closest on list)

Thank you so much
Shannon

Posted by on

  • Anonymous Sep 17, 2008

    I'm also trying to find a solution to this problem


  • Anonymous Dec 28, 2008

    same problem, will up date if i find out!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Radelle1967,
I had originally bough these speakers for the sole purpose of connecting them to my 26" LCD Vizio television. I quickly realized that these speakers were not made for a television, so I just kept them connected to my desktop PC.
However, one day I asked my buddy from college to look at them and see what he thought. It took him a while to figure it out, but here is how I have them hooked up.
I can not guarantee that this will work on any other television set, but it does on mine. On the back of my Vizio television there is a hookup called "optional audio," which is located beneath the yellow, red, and white hookups. I hooked a 3-way headphone splitter into the "optional audio" hookup and then plugged the three cables from the speakers into the splitter.
Hooking up your speakers like this works very good and the sound is equally distributed between all speakers. However, there is a setting on my television under the sound menu that enables you to turn "surround" on. I had been told that by using a 3-way headphone splitter I wouldn't be able to get true surround sound, but turning on this option on my television actually allows this to be accomplished.

Hope this works for you. I purchased the 3-way splitter at radioshack and it was under $10. If your television does not have an "optional audio" hookup, you could probably try an RCA connector with just the red and white hookups that split into one and then connect the 3-way splitter to that.

Posted on Jan 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Want to use my current speakers with a new surround sound system. Current system is 5.1 channels, rated at 100w per channel @ 8. Ohms. New System is rated 145watts, 5.2 channels at 6 Ohms. Will b ok?


Hi Ronald.
8 Ohm speakers will work just fine as replacements for the
6 ohm speakers. When fitting speakers you need to consider
The power handling capability. The impedance and the frequencies
involved. Power handling is expressed in wattage ie 100W.
Unfortunately this can be expressed in rms, max or peak music. The rms value (root mean square) is the only really relevant figure as this is the continuose handling power at 1 KHz. The impedance
is the resistance that the amp sees but is not a dc resistance and
varies with frequency. The lower the impedance the more power
will be drawn from the amp. In the event of a short circuit across
the speaker the amp will try to deliver infinite power into an infinitly
small load in an infinitesimal amount of time and will self destruct.
Using an 8 Ohm speaker draws less power than a 6 Ohm speaker.
Connecting speakers in parallel; results in the impedance beingreduced. For example two 8 Ohm speakers in parallel will result
in a 4 Ohm impedance load but in series will be 16 Ohms.
Incidentally the the .1 (5.1) is the sub woofer which only has
to handle the bass frequencies, a small percentage of the
amplifiers overall frequency response..
Connect your speakers and then power up the amp last
after double checking there are no shorts on the speaker
cables.
All the very best from Vintie.





Jan 07, 2017 | Audio Players & Recorders

1 Answer

My tv sound quit. can I hock these speakers to the tv and have sound


What make and model is it?
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Apr 06, 2016 | Audio Players & Recorders

1 Answer

I have a m4500 creative speaker the problem is the volume switch when i turn it on the green light is on and when i increasing the volume the become dimmer until its off and no sound,what is cause?


It sounds like the output IC (the amplifer) has a problem.This needs to be replaced.
ELECTREPAIRUSA@ELECTREPAIRUSA or you can contact us at that address as we repair/renovate all items electronic and electrical old and new.

Mar 12, 2016 | Audio Players & Recorders

1 Answer

How do I open a UC-280 2.0CH USB Powered speaker system to reconnect the broken cable.


Once you open the speaker it will destroy the acoustic properties and make the speaker useless. The speakers are assembled with takp and glue and have to be pried apart.

Mar 14, 2015 | Audio Players & Recorders

2 Answers

Hi,Just purchased 2 antec gain Bluetooth receivers type bxr 100. Operating instructions are not included. Maybe it's just me, but i'm not succeeding in getting them to work. No lights at all when they


Make sure that the unit is fully charged by a micro USB the light on it will be red until it's fully charged put phone in search mode and press the center button until the light flashes red and blue after the phone finds it you should have an option to auto pair when it's not in use it will turn off when paired and working pressing either track button will start the music player then just play with the buttons and see what it does you can stop anything from the phone controls

Mar 18, 2014 | Antec BXR-100 Gry Audio...

1 Answer

How to connect speakers logitech z 5500 to the TV Samsung UN32F5500 32-Inch 1080p 60Hz Slim Smart LED


Hello there!
I have seen manuals of both the systems. You have two options to connect Logitech z5500 speakers to Samsung UN32F5500 TV.
1. With Optical Audio Cable.

0daa0bcc-2410-4f3f-9f1b-001ec53d8ec3.jpg

2. Stereo Ear Phone Connection.
Simply plug in Green earphone cable of Logitech Speakers to Green Audio out Jack described on Page 7 of the TV manual. If you are using stereo EP you may not experience 5.1sound separation. And it is also mentioned that you should not use other two audio cables of the tri-EP-cable provided with Logitech speakers.

Have a nice day!

Mar 12, 2014 | Audio Players & Recorders

2 Answers

Iwave pod bluetooth speaker


Unless your PC is Bluetooth capable, you'll need to get a Bluetooth device to make it so. This is just one of many such devices to select from. Amazon com Roker Ultra Mini CSR Bluetooth 4 0 Usb Adator for PC and... They vary in size and price. Shop around to find one that best suits your budget. But you want an adaptor/receiver specifically for Bluetooth. (you will need an empty USB port for the adaptor)

Hope this information helps, best of luck!

Feb 06, 2014 | Audio Players & Recorders

2 Answers

Connect an active soundbar to a receiver


What if the soundbar is Bluetooth? Will I still be able to use that function and connect the active soundbar to the tv (Bluetooth) and connect the av receiver for other surround sound speakers? (they are pre-wired in the walls in the apartment I moved into)

Jan 08, 2013 | Audio Players & Recorders

1 Answer

It wont turn on, it shows 'push power protect' when you turn it on, or disconnect it and reconnect, i already attempted to disconnect the Sony Stereo MCH-EC909iP Mini Hi-Fi and it shows 'Push Power, P


The only thing I can think of is its goin into protection mode like an amplifier would, you maxed the volume out and it's protecting your speakers or you don't have the right voltage going to it, I can see you don't have it on a straight 120v plug and you might have the wiring wrong on the speakers to it might be too low of a ohm or too high

Nov 22, 2012 | Audio Players & Recorders

3 Answers

Front two speakers not working at all


Hit the the speakers A/B/Off button on the receiver. If you plugged the front channels speaker wire next to the center channel on the back of the receiver make sure its showing B. If you plugged them in the banana plug part, make sure its showing A.

Apr 12, 2007 | Audio Players & Recorders

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

704 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

98868 Answers

 Grubhead
Grubhead

Level 3 Expert

4678 Answers

The Knight
The Knight

Level 3 Expert

69845 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...