How to connect my xbox 360 to my pc

Okay- the three cables (red, white, and yellow) are called RCA plug connectors. They are commonly used to carry audio and video signals.
Plug them into your Xbox according to the color codes- red cable connector to the red socket (jacks); then white to white, and yellow to yellow.
Now connect these leads to the RCA input jacks in the back of your t.v. - maintaining the same color code connections (red to red; white to white, and yellow to yellow)
The RCA input jacks on your t.v. should be labeled with an input number, to distinguish itself from the other inputs, like HDMI, S-Video, and such.
After plugging in your Xbox to the wall outlet or surge strip, turn it on.
Turn your t.v. set on.
With the remote control that came with your t.v. set, open the menu bar, scroll to... and open the "External Output" menu.
You should see a list of [however many] inputs your particular t.v has. Scroll to the input number that the 3 RCA cables are attached to, and press that number as the default video screen.
Exit the prompts and your Xbox video screen should be displayed.

Hello

The Xbox 360 connects to a TV using either

- COMPONENT (red blue green for video, red and white for audio

- COMPOSITE (yellow for video, red and white for audio)

- HDMI

So, if your TV is on a "Channel", it is not on the correct input to view the Xbox 360.

Check the Xbox and verify which cables it is using to connect to the TV. When you find this, follow the cable to the back of the TV and find the input selection. It should be listed as the type and a number (i.e. HDMI 2, COMPONENT 1).

Have the Xbox on. Use the TV remote and use either the INPUT or the MENU options to change the input to the input that matches the port that the Xbox is connected to.

This should make the Xbox work.

When you are done with the Xbox, use the INPUT or MENU to change back to the tuner to watch TV.

Hello depending on what type of input u use there is a switch on the cable nearest the cable end that is labeled TV and HDTV if you are using all five cables to connect the xbox then put the switch to HDTV, if you are useing the yellow, red, and white then put the switch in TV mode.

Troubleshoot.

1. Ensure yellow is actually connected to an "input" slot.

2. Ensure TV is set to the correct input source.

3. Ensure your yellow, white and red RCA connectors are grouped in a single input source to TV. Sometimes the "component" and "composite" inputs are grouped closely together.

4. Consult the TV manual for hookup instructions.

5. Conduct a continuity test on the yellow xbox wire with a multi-meter.

First make sure your video cable is set to TV not HDTV

Then plug the 3 RCA cables into the color coded slots on the TV. Make sure you aren't using the red cable from the component RGB but are using the red cable for sound (next to the white one).

Then, if you still have no picture, start the console using the controllers Xbox button and hold "Y" and "RT" until the console restarts. this will reset the video settings on the 360 to default.

Follow this guide if you get confused:
http://support.xbox.com/en-us/pages/xbox-360/how-to/audio-video-devices/connect-xbox-360-console-tv.aspx

and for the video reset about halfway down the page:
http://support.xbox.com/en-us/Pages/xbox-360/troubleshoot/xbox-360-top-issues/tv-or-monitor-screen-is-blank-while-connected.aspx

check your red,yellow and white calbes and check if they're in the right slot or check if your on the right video where your xbox is playing from

You have a few options actually. depending on which 360 you have you have at least 3 ways to connect; 4 if you have CDMI cable output on Elite 360. you only need to pick one though. easiest is the plug with one yellow and a red and white. the yellow is the video and the red and white are the left and right audio. You can use the red green blue plugs choice if your tv has that input. in that case the red green blue are the video and you use the other paired red white for audio. You can use the S video connection (the round one that looks like a mouse plug) for video. You can use the HDMI (flat, looks like giant USB slot) for really high quality video. So, basically just use whatever cable you happen to have. If you still have questions, please ask as we will definitely get you hooked up for sure:) farmerbear at FixYa

It could be 3 things:

Your tv connections are disconnected and need to be replaced. See if anything else works when plugged into these connections.

Your cable cord could have a disconnect internally and the cord needs replaced.

Your graphics card on you XBOX 360 is shot any you need to replace it.

Good luck and please rate my solution accordingly.

V/r,

Coldissickofman

Hello there:
You will need the red/yellow/white video cables and just hook up the yelow and white up to the xbox and the other end yellow and white to the tv than turn the tv to channel 3 and this should work
best regards mike

If you can still HEAR sound, but can't see. Check your Audio Video Cable.

It's the colorful one (red, white, yellow) (red, blue green, white, red)

Make sure the connections are secure into the back of the TV as well as the connection to the back of the Xbox 360.