When I turn on the stereo by pressing "Standby" the stereo turns on and the volume is extremely loud. I have tried to turn the volume down very low before shutting it off and then when I turn the stereo back on the volume is loud again. How can I adjust this. There is nothing in the instructions manual for this.
My stereo is a: Durabrand HM3817DT CD Home Music System
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Turn the unit off and dis-connect the speaker wires, press power and turn down volume, if it comes out of standby mode and comes on it means there is a short in the wires or one of the speakers. But! if it stays in standby with everything dis-connected it proves that one or more of the audio output ic packs is shorted and needs a tech to resolve the issue.
I sent a note to the manufacturer. Communication attached below.
We thank you for your interest in GPX and our products. We apologize, but the volume level on the unit is a factory setting that we are not able to override or alter.
Once again, we apologize for any inconvenience this may have caused.
GPX Consumer Service
To stop the demonstration mode
• Press and hold stop (on the system
only) for five seconds when the
system is in demonstration mode.
ª The demonstration will stop.
ª "DEMO OFF" is displayed.
ª The system will switch to standby