Question about Frigidaire ATF6000ES Front Load Washer
What is error code 30?
It means the drum is overfilled with water. . Select the drain and spin cycle to empty the washer. Then start over. If this doesn't work, you will need a repairman.
Posted on Aug 02, 2008
Tips for a great answer:
Hello Roger, thank you for your inquiry!
Based off the information you have provided you would like to know what an E-11 error code means on your Frigidaire washer. An E-11 error code means that the fill time is too long. This could be a possible problem with your pressure sensor, water valve, or main control panel. If the water pressure is below 30 PSI then it will continue to display the error code of E-11. Also make sure the hoses are not restricted or blocked because this could cause the error code to display. I hope this information has been helpful to you. -Matt
Dec 01, 2015 | Frigidaire Affinity ATF6000F Front Load...
Oct 19, 2015 | Washing Machines
Good Morning friend, thank you for your post!
I see that your Frigidaire frontload washer runs for 30 seconds, then stops, and produces an error code "E64". It appears that might be an invalid error code. I would recommend performing a reset on your washer and you can do that by unplugging the power cord for at least ten minutes. If you continue to receive the error code or a new error code please reply back. I would like to assist you further. -Matt
Jun 04, 2015 | Frigidaire Washing Machines
Nov 29, 2013 | Frigidaire Affinity ATF7000E Front Load...
Oct 14, 2013 | Frigidaire ATF6000ES Front Load Washer
Jul 25, 2013 | Electrolux Washing Machines
Aug 18, 2008 | LG WM2277HSW XL Front Load Stackable...
94 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: