An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert who has achieved Level 3.
Re: HP 3 button optical wireless mouse
It is normal because the mouse is still picking up the "stand by" power of the motherboard.
It will very very slowly trickle away any charge you have in the laptop battery, but over such a long time you would probably not notice.
The mice on my desktop machines do the same thing, as I live in an area prone to electrical surges I shut down my machines and power strips every night and as soon as I do the laser light in the mouse goes out.
On my laptop I have a wireless optical mouse and when I finish using it, I remove the USB adapter, the USB adapter then slides into a receptical in the mouse and automatically switches the mouse off saving the mouse battery.
If it concerns you just unplug the mouse when it's not in use
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Technician (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
maybe the battery?
follow the steps below to troubleshoot the mouse Wireless mouse does not respond (generic instructions) Try to Resynchronize your device with the receiver(connector) Follow these steps.: Note When you synchronize the mouse or the keyboard with the receiver, put the device near the receiver and put other wireless keyboards and mouse at least 6 feet away. 1. Press the button on the receiver, and then verify that the light on the receiver starts to blink. 2. If a dialog box appears on the screen in several seconds, follow the instructions that appear on the screen. Otherwise, go to the next step. 2. Press and release the Connect Channel button on the bottom of the mouse or the keyboard. 3. Check the green light on the receiver. A steady green light means the synchronization was successful. If the problem persists, try steps 1 through 3 again. For the Wireless Notebook mouse: This issue can occur if the micro-switch on the bottom of the mouse is not released. Use a pin or a pen to try to release the button if it is depressed. or Try different port and restart your computer. or Reinsert the batteries or install fresh batteries If you have the possibility check whether the problem is because of your computer or the device, try the mouse or the keyboard on a different computer.
Make sure you have fresh batteries...usually this is how to set up a wireless keyboard and mouse. Insert the reciever in the USB and hit the link button normally located as a recessed button on the bottom, a light will blink....On the keyboard press the button as before located as a recessed button on the bottom. Once linked the reciever light should stop blinking...do the same with the mouse.