Question about Minolta EP4000/5000 CS/PRO Copier

1 Answer

Dialta DI 3010 Administrator Password Problem

Hi,
We have this copier which we need to get into the administrator area to set up a new user password. Unfortunately, the password someone has written down is wrong and so we cannot get into the administrator section. Any ideas how we can either reset this password or how to get in.
Many thanks, Robin

Posted by on

1 Answer

Don't buy minolta

Posted on Aug 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do a forgotten admin password on a xerox 7655


WorkCentre 7655 7665 7675 Online Support Solution Modify the Printer...
Solution : Modify the Printer's Administrator Password Using CentreWare Internet Services (CWIS) NOTE: This solution assumes the WorkCentre is configured and working properly on the network.
  1. From the computer, open an Internet browser window.
  2. Enter the IP address for the WorkCentre in theAddressfield, and then press [Enter] on the keyboard. The CentreWare Internet Services window will be displayed.
  3. Click on the [Properties] tab.

    NOTE:If the Login screen is displayed, enter the user name in theUser IDfield, and the password in thePasswordfield, and then click on the [Login] button.

    The default username is "admin" (case sensitive), and the default password is "1111". If it has been changed or forgotten, contact Support.
  4. Click on [Security] to expand the list of options.
  5. Select [Authentication Configuration].
  6. Click on the [Modify] button for Device System Administrator Password.
  7. Enter a new password in theNew Passwordfield.
  8. Retype the password in theRetype Passwordfield.
  9. Click on [Save]. This will be the new password to log into the Control Panel and CWIS.

http://www.support.xerox.com/SRVS/CGI-BIN/WEBCGI.EXE?St=143,E=0000000004704152929,K=9646,Sxi=4,Case=obj(3814)

Solution : Modify the Default Admin (Tools Mode) Password on the WorkCentre NOTE:The Admin (Tools Mode) password allows access to configure network and machine settings on the printer.Xerox recommends only changing the default Admin (Tools Mode) password if absolutely necessary. If the password has been changed from the default password (1111) and has been forgotten, a service call is required to reset the password.
To change the default Admin (Tools Mode) password:
  1. Press the [Log In / Out] button on the Control Panel. The Log In window will be displayed. See theRelated Itemsbelow for additional information regarding logging into the WorkCentre.
  2. Select [Security Settings] on the left side of the screen.
  3. Select [Authentication] from theGroupscolumn and then select [User / Administrator Accounts] from theFeaturescolumn. The User Administrator screen will be displayed.
  4. Select the [Account #] field, and then select account number 1 using the keypad on the Control Panel.
  5. Select the [Configure Account] button. The Configure User Accounts screen will be displayed.
  6. Press the [Clear C] button (several times, as required) on the Control Panel to clear the old password.
  7. Enter the new password using the keypad on the Control Panel.
  8. If necessary, place a check mark in the [System Administrator (Admin)] and [Account Administrator] check boxes, and then select [Save Account].
  9. Select [Close].
  10. Press the [Log In / Out] button on the Control Panel.
  11. Select [Logout] on the Touch Screen.

Apr 04, 2014 | Xerox WorkCentre M-24 Color Copier

1 Answer

Reset hp 4015 admin password


You can reset administrator password with Windows built-in administrator account:

1. Log on with the guest account on windows, then right click computer, and choose Management.
2. Expand Local Users and Groups and Users in the console.
3. Right-click Administrator account and select Properties.
4. On the General tab, clear the Account is Disabled check box.
5. Close the console.
Now the super administrator account is successfully enabled. Next, you can easily reset the forgotten admin password from "Start->Control Panel".

If the above method can not help you, you can use Smartkey Windows Password Recovery to help you to reset the password, and see the detail direction from http://www.recoverlostpassword.com/products/windowspasswordrecovery.html.

Jul 31, 2012 | Printers & Copiers

1 Answer

I forgot user name and password of copy system (Printer Nashuatec Aficio dsm651 ) . I can not get into the system settings. How can I remove the user name and password that I forgot? thanks alot


there is 1 of 2 defaults that if not changed should still be there username service with no password or administrator with no password
if those were changed you will need an new NV RAM chip that will reset all your settings and passwords

Jul 30, 2011 | Ricoh Aficio 450 Copier

1 Answer

Bought a new Canon Pixma MG6150. Have followed the directions up to page 29. Have put the CD into the CDROM drive and clicked on Msetup4.exe, my admin screen pops up, I type in the password and get the...


Hi,
According to your problem you can't install the driver of your printer. For your information to install any software or hardware you must need administrative privilege. If there require administrator password to login and you can't login also after giving password then first check the password you have typed is correct. Some time guest user can't do the all thing after get administrator password. Then you must need to login as administrator. You can try to start the setup by right click on the setup.exe and selecting Run as Administrator. If it doesn't help you then you need to change the user permission from administrator account.

Apr 26, 2011 | Canon Printers & Copiers

1 Answer

Hi, We have a Di3010 copier which we need to get into the administrator area to set up a new user password. Unfortunately, the password someone has written down is wrong and so we cannot get into the...


There are 2 possible default passwords that may work. Try these first and if they do not work let me know. Then I will have to walk you thru the service mode entry procedure and instruct you how to change the admin password.
The 2 default password possibilities are 12345678 and 00000000
Let me know if these do not work.
Thank You for using Fixya.
We are having a contest this month based on positive testimonials. If my solution works for you then please leave a short testimonial for me.
Thanks!

Oct 06, 2010 | Minolta EP4000/5000 CS/PRO Copier

2 Answers

We lost the user codes for our ricoh ft4522. how


select user tools, admin , address book you should be able to see the pre programmed user codes. there also should be an option to view or print out the codes

Oct 15, 2009 | Ricoh Aficio 450 Copier

2 Answers

Access authorization code


I think this is the one you want to change. If not let me know please.

  1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
  2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
  3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.

    NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.

  4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
  5. Select [System Settings]. The System Settings screen will be displayed.
  6. Select [System Administrator Settings]. The System Administrator Settings screen will be displayed.
  7. Select [System Administrator Login ID]. The System Administrator Login ID screen will be displayed.
  8. Select [On].
  9. Enter a new System Administrator userID in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  10. Select [Next] and re-enter the System Administrator userID in the field provided.
  11. Select [Save] to save the changes.
  12. Select [System Administrator Password]. The System Administrator Password screen will be displayed.
  13. Enter a new System Administrator password in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  14. Select [Next] and re-enter the System Administrator password in the field provided.
  15. Select [Save] to save the password.
  16. Select [Close] three times.
  17. Select [Exit].

    NOTE: Make note of the new System Administrator userID and password. If the new System Administrator userID and password are forgotten, a service call must be placed

Jan 29, 2009 | Xerox CopyCentre C123 Copier

1 Answer

I need to change the access code as some non authorized people are using my photocopier. How can I do that?


I am answering this twice since it appeared twice, If this isnt the code you want to change let me know. I believe this is the one you are asking.

  1. Press the [Log In / Out] button on the Control Panel. The Login screen will be displayed.
  2. Enter the System Administrator userID using the numeric keypad on the Control Panel, or select the [Keyboard] button on the Touch Screen to enter the userID, and then select [Save] on the Touch Screen.
  3. If necessary, enter the System Administrator password using the numeric keypad, or select the [Keyboard] button to enter the password, and then select [Save] on the Touch Screen.

    NOTE: The default userID is 11111, and the default password is x-admin (must be entered in lower case). If the userID and / or password have been forgotten, a service call must be placed.

  4. Select [Confirm] on the Touch Screen. The System Administrator Menu screen will be displayed.
  5. Select [System Settings]. The System Settings screen will be displayed.
  6. Select [System Administrator Settings]. The System Administrator Settings screen will be displayed.
  7. Select [System Administrator Login ID]. The System Administrator Login ID screen will be displayed.
  8. Select [On].
  9. Enter a new System Administrator userID in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  10. Select [Next] and re-enter the System Administrator userID in the field provided.
  11. Select [Save] to save the changes.
  12. Select [System Administrator Password]. The System Administrator Password screen will be displayed.
  13. Enter a new System Administrator password in the field provided using the numeric keypad, or select [Keyboard] to use the Touch Screen keyboard.
  14. Select [Next] and re-enter the System Administrator password in the field provided.
  15. Select [Save] to save the password.
  16. Select [Close] three times.
  17. Select [Exit].

    NOTE: Make note of the new System Administrator userID and password. If the new System Administrator userID and password are forgotten, a service call must be placed

Jan 29, 2009 | Xerox CopyCentre C123 Copier

11 Answers

Forgot password


Have You Lost Your Windows Admin Password?

Forgetting your Windows administrator login password. With no way to get into the system, you can’t even perform basic maintenance, let alone a thorough tune-up. Formatting is always an option, but we consider that a last resort. (Plus, guess who’s going to have to help reinstall all the programs lost after a wipe?) But all hope is not lost. There are a few ways to actually retrieve a lost Windows account password. Read on, and we’ll show you the light.

1st Method:
The first thing which you check if you forget login password. When we install Windows, it automatically creates an account "Administrator" and sets its password to blank. So if you have forget your user account password then try this:
Start system and when you see Windows Welcome screen / Login screen, press <ctrl>+<alt>+<del> keys twice and it'll show Classic Login box. Now type "Administrator" (without quotes) in Username and leave Password field blank. Now press Enter and you should be able to log in Windows.
Now you can reset your account password from "Control Panel -> User Accounts".
Same thing can be done using Safe Mode. In Safe Mode Windows will show this in-built Administrator account in Login screen.

2th Method:
There are a lot of Windows password revealers and crackers available, but we’ve found that Windows Password Recovery Tool is the most effective.:
Windows Password Recovery Tool is one of the easiest password recovery tools to use. It allows you to reset a user account password, including the Administrator password. It is also a relatively small download.
Windows Password Recovery Tool Service: http://www.windowspasswordsrecovery.com

Oct 06, 2008 | Lexmark X2500 All-In-One Printer

1 Answer

Hi i have photo copier minolta dialta di183


Enter the admin mode (U-5) by holding down the Panel Reset key for 3 seconds (until "U- " appears in the display), entering the number 5 from the keypad, and pressing the start key. Enter the 6 digit administrator code and press the start key again. The display should show "Ad-". Enter 1 from the keypad and again press the start key. The display should read "0". Hit the clear key, enter "1" and hit the start key yet again. Hit Panel Reset several times (or turn the machine off and back on) to return to normal operation.

The default administrator code is 000000.

If you do not know the administrator code, it will be necessary to reset it using the tech rep mode. Enter the tech rep mode by pressing the Meter Count key and hitting "Stop - 0 - 0 - Stop - 0 - 1" quickly. Then hit 7 and the start key. The administrator code will flash. You can write it down and use it, or hit the clear key and enter a new code, then the start key. Exit as above.

Jul 03, 2008 | Minolta DiALTA Di183 Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

520 people viewed this question

Ask a Question

Usually answered in minutes!

Top Minolta Printers & Copiers Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

5695 Answers

David Burkhart
David Burkhart

Level 2 Expert

207 Answers

john archer

Level 2 Expert

186 Answers

Are you a Minolta Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...