Question about Projection Televisions

1 Answer

Firstly i do not have a projection tv problem

Purchased nec tv sets from a motel hotel auction. two of them i can only get two channels on, i am not sure if those two are uhf or vhf.
i can see at the back that they were connected differently to the other sets as there is part of lead connected away from the normal din or plugs normally used.
is this a pay tv connection or in house and how can i change it back to normal domestic use?
any advice gratefully accepted. kevin burns

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

I've searched everywhere for any info in regards to your TVs but nothing comes up. It appears that those monitors or TVs were somehow just modified to work with the motel setup. You can try to use them with an external tuner such as a VCR to tune the channels to send the video signal to the TV.
What other type of connectors dod you have at the back?
Is there a way you can post a picture of the back of your TV?

Posted on Jul 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Phillips 21ht1882/75r its stuck in hotel mode please help


Did you purchase this from a hotel? If this set come from a commercial business, you probably do not have an original remote. These sets are marketed as just a TV with few functions.

Jan 26, 2010 | Projection Televisions

1 Answer

How to convert a phillip tv from hotel mode to consumer mode without a remote


people stop stealing motel tv's!!!!

Special TV's made for that purpose are manufactured that way. There is no converting them. Give it back.

Nov 22, 2009 | Projection Televisions

2 Answers

Lost remote need code for universal remote control.


Setting Up Your NEC TVrembar.gif
  1. Turn on your TV.
  2. On your Tune In remote, press TV and release.
  3. Press and hold Set until the green light on Tune In blinks once, pauses and then blinks twice. Now release the Set key.
  4. Enter the first three-digit TV code for your NEC from the list which follows:
    030, 056, 019
    These codes are listed in order of popularity, and the green light will blink twice if you perform this procedure correctly.
  5. Aim Tune In at your TV and press Power. Your TV should turn off. If it does not, repeat steps 2-5, trying each code listed in step 4 until you find the one that operates your TV.
Now Test Your TVWhy test? Many times more than one code appears to work. Testing is desirable to be sure you have the correct code for your TV or the other devices you are setting up.
  1. Press the Power key to turn on the TV, then press mute, channel scan ("CH") and volume ("VOL") keys. Tune channels 7 and 11 by entering the number followed by the Enter key.
  2. If your TV does not pass the test, return to Step 2 at the top of this page. Enter the next three-digit code and repeat the process.

May 11, 2009 | Projection Televisions

1 Answer

Trying to Tune local channels on a NEC TV Model #4856 using the NEC remote control # RD111OE... Can anyone help!


Hold down both the PRESET-HOLD buttons at the same time
Press again until AUTO is displayed.
Press ^Vloume to start automatic search

Dec 11, 2008 | Projection Televisions

1 Answer

Hitachi 32LD6600 defaulting to ext-5 input, cannot change input from remote or set - non resposnive


easy
you have to get your tv into "hotell" mode:

1 meny then type 1,3,2,5 and the hotel meny show...set it on and to start on ext5....close with meny...turn tv off and then on and your problem is solved

Nov 16, 2008 | Hitachi Projection Televisions

1 Answer

I have few tv but it has only 36 channels. it is from my other hotel .. i try to set it up and i did i got all cable channels too. but when i turn off and turn on again all i can see is only 36 channels...


call the cable company that is providing cable to your new hotel , and ask them what the problem is , if could be that someone fiddled with outside wires of your old hotel , hope i helped sincerely John

Aug 01, 2008 | Projection Televisions

1 Answer

I was given a rca j27330bl tv when hotel switched to plasma and channels are very limited and does not allow to change the set up


I also am not able to program the channels with the menu on the tv or with the remote. I contacted RCA and they were absolutely no help. Does anyone know how to reset these tvs??

May 02, 2008 | Projection Televisions

1 Answer

NEC tv


go in to the on screen display from the remote select the channel that your missing say 12 then click add +

Dec 12, 2007 | Sony KP-41T65 41" Rear Projection...

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60960 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...