Question about Lexmark Printers & Copiers
There is a manual paper release on the bottom of the paper tray. If it gets stuck the paper does not rise to be picked up. Not sure why it registers an amber paper jam for it, but I taped my release open and put the tray back in carefully. Its been working for 2 days straight now.
My real issue was I had both the low toner and paper jam lights on solid and amber. I waited a few days to post this to make sure it worked. Worth a shot for you all. post back if it works for you .
Posted on Feb 27, 2009
that is because ur head of ur printing cartridge is damaged.
remove ur cartridges black as well as color
n install only black cartridge n check d blinking of lights on ur printer if it doesn't blinks it's mean ur black cartridge is OK but ur blinking of light on ur printer is same it's mean ur head of black cartridge is damaged
after this process remove the black one cartridge and install the color one cartridge n check d blinking of lights on ur printer if it doesn't blinks it's mean ur color cartridge is OK but ur blinking of light on ur printer is same it's mean ur head of color cartridge is damaged
now take a dry cotton cloth n gently clean ur cartridges head install both cartridges on ur printer n check ur blinking light on ur printer that will work only if u r too lucky other wise u have to purchase a one cartridge.
Posted on May 29, 2011
SOURCE: My printer stopped printing in
Possible reasons are:
Clear the paper jam. If the printer does not start printing, press the control panel button.
Put paper in the printer. Then press the control panel button.
Put the paper back in properly, and then press the control panel button. The printer will start printing again.
You have explanations HERE
Posted on Sep 24, 2011
In most cases the printer driver software can have errors while being in use or is shut down. So to reset remove your printer from the PC and uninstall the printer software. Now reinstall the printer software and then connect the Printer ONLY WHEN PROMPTED, to be detected as a new hardware as it will be installed. Now check the printer properties to see the ink levels.
Activate head cleaning before a test is taken. Sometimes it is possible that the head is not reacting to the need of the PC command or can be an issue with ink drying or poor ink cartridge contacts.
Posted on Nov 10, 2011
Tips for a great answer:
Mar 13, 2012 | Epson T50 InkJet Printer
Sep 11, 2011 | Brother HL-2040 Laser Printer
May 29, 2011 | HP DeskJet 5550 InkJet Printer
May 14, 2011 | HP Color LaserJet 2600n Printer
Dec 08, 2009 | Canon PIXMA iP4000 InkJet Photo Printer
Apr 01, 2009 | HP Officejet 5510xi Printer
20 people viewed this question
Usually answered in minutes!