Question about Pioneer SD-532HD5 53" Rear Projection Television

1 Answer

Turns on....no picture and audio is static

Have owned since new.... have replaced the power supply board last summer. Now the TV went dead today. Powers up and styas on, but no video or audio (what audio there is, is static. Changine inputs does not resolve the issue. All three guns/bulbs are not lit..... any ideas? I know it's getting hard to find parts for these guys as well.... maybe time to move upward and onward.

Thanks in advance

Posted by on

  • fishermandan Dec 04, 2008

    I have the same problem - I read somewhere its a static buildup - actually says so in the manual. I usually leave it on until the static discharges and then its fine. I would like to know what the long term fix is for this - its an outstanding TV otherwise. Mine is a 65"

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

As for the audio it could be a short somewhere in the speaker line. that is my best bet. video, well could be the same thing or it could be that on of the receptors for the projectors fried. i would go into a tv shop and ask them what the problem could be they usually give you advise if you sound like you know what you are doing.

Posted on Nov 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The picture went greenish with black in the center and now it has no picture, justs the power button blinks 5 times over and over. Where can I find a DG board?


Hello,
Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement. Hoping this will help in solving the problem...

Aug 21, 2011 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

I have a Samsung HLP466w. The picture went black but still have sound. Lamp flashing and tv will not turn off, have to unplug. Help please!


Hello,
Your power supply board is dead, u know basic electronics' and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
Hoping this work out in solving the problem

Aug 09, 2011 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

When the TV first went out there was no picture or sound so I replaced the bulb and had sound and pic for about 6 hrs total between 2 days of watching the TV. So I sent that bulb back and received an...


This tv have a board call the ballast board to help the projection lamp to ignite.U hear clicking noises mean the ballast board is dead,not doing it job igniting the projection lamp.

Jan 17, 2011 | Mitsubishi WD-57733 57" HDTV

1 Answer

I have a 52'' HDTV Projection RCA tv and it went out no pic or sound so i UNPLUGGED and had to wait a month later which was today so I turned on and it had beautiful picture for about 20 min then it turned...


U have tools,can u do basic soldering,and understand basic electronic?Yes.Take ur tv aparts.Take out the DM power supply board check for dying,soon to be dead capacitors.These capacitors are alway bulges or puffing up on it tops.U replaced these dying capacitors,u will solved this power light blinking problems.Try website like Tvrepairworld.com might still sell those prepack capacitors repair kit for the RCA DLP tv DM power supply board.

Nov 17, 2010 | RCA HD52W56 52" Rear Projection HDTV

1 Answer

I have a 65 inch Mitsubishi rear projection HD TV. The screen went blank today. I have cable hooked up to the componant input and I get no sound or audio. If I hit input a few times I get static sound...


Does the input menu appear on the screen when you press input? If so its probably the IC Regulator 9v supplying the video board. If the green light on the front is blinking then powering off it is one of the 7 capacitors and you should just replace them all, 30-35 bucks. If the power stays on and its just your video isnt coming on(audio as well) it is the IC Regulator. Mine called for the part - BA09FP IC REGULATOR 9V It is about half the size of a pinky nail and located directly behind the video input board in the back of the tv. It has two prongs on the left side and one wide tab on the right. It solders directly to the top of the board and not through it. It says BA09 on the chip. This fixed the problem for me.

Aug 16, 2010 | Mitsubishi WS-65613 65" Rear Projection...

1 Answer

I have a Sony 57inch rear projection HD TV that when powered on turns green then blue and picture turns off. What could be the reason for this?


Hi,
Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Power supply board have problems,just not dead yet.Replaced the power supply board,will solved this problems.Tries websites like Shopjimmy.com,Ebay.com to buy a refurbish power supply board for the replacement.


May 25, 2010 | Sony KP-57WS500 57" Rear Projection...

1 Answer

No Video/Sound,POwr Gren LiTE Blinks 4Ever, SONY WEGA KDF-55WF655


Hi,
Please check lamp in tv as pop sound seems broken lamp.
Did you replaced lamp in last 2-3 years in tv? If not, then its lamp that got broken and tv needs new lamp.
Lamp replacement procedure is written in user manual and its easy, please buy Sony original lamp for good picture in tv.
Thanks.

Apr 25, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Own a 52" panasonic rear projection tv. Heard a loud pop, and tv went out. Will not turn back on.


Power supply board is dead.Replaced power supply will solved this problem.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish power supply board to replaced.

Feb 25, 2010 | Panasonic PT-53TW53 53" Rear Projection...

1 Answer

Big screen tv. led turns on but no picture.Then tv turns off on its own. Need a ruff estimate on cost to fix.


Your TV has a power supply problem. The power supply board is not sending the correct voltage to the video board so the protection circuit shuts it down. The power board can be replaced or rebuilt. Most repair shops will replace it.
I have repaired many of these. Usually it involves new capacitors and fuses. 
I would guess a shop is going to charge $150-$300 to fix this.

Dec 10, 2009 | Mitsubishi WS-55809 55" Rear Projection...

1 Answer

Hi again


yes 3x its lamp cover no doubt. ballast supply will give different error on this unit. this should help hdtv man

Diagnostic Item
Description
Number of times
STANDBY or LAMP LED
lamp flashes
Probable Cause Detected Symptoms
Lamp cover error 3 times - Lamp cover is not fastened securely - No picture/No sound
Fan error 4 times
- Fan1-4 Power is not supplied.(G2 board)
- Fan connector is not seated securely
- Fan caught wires or harnesses
- No picture/No sound
Temp error 4 times
- Internal temperature is too high
- IIC-E line connector is not seated properly
(WE:H3 board, WF/XS:H4 board)
- No picture/No sound
Lamp driver error 5 times - Lamp driver defect - No picture/No sound
Low B error 6 times -No "DD 6V " output (G1 board) - No picture/No sound
Audio error 7 times
- Short-circuit of Audio power supply line
(KD board, G1 board)
- Blowout of a fuse
(F4702,F4703,F4704 on KD board)
- IC failure
(IC4703,IC4708,IC4710 on KD board)
- No picture/No sound
D-OVP error 8 times
- Overvoltage of +3.3V or +2.5V
(A board, B board)
- No picture/No sound
ATSC-OVP error 10 times
-No "DTL MODULE 5V " output
(G1 board, G2 board)
- No picture/No sound
Lamp error LAMP-LED is ON. - Lamp is dead - No picture/No sound

Jul 01, 2008 | Sony Grand WEGA KDF-42WE655 42" Rear...

Not finding what you are looking for?
Pioneer SD-532HD5 53" Rear Projection Television Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69955 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6467 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...